When decorating, whether to lay wooden floors or paint the walls first

When it comes to interior renovation, the usual step is to paint the walls first and then lay the wooden floors. Such an order is mainly due to the convenience of construction and the need to protect materials.

With the decoration device, you only need to enter the area + city, and calculate the most affordable local market in 3 seconds**: [Tuba Rabbit Big Platform Counts**].

No longer worry about the company's price increase, omission and price increase.

Painting the walls is an important step in interior decoration, and it directly affects the overall appearance of the room. If you lay the wooden floor first and then paint the wall, there may be paint dripping on the floor, causing contamination of the floor, which is very troublesome to clean. In addition, it takes some time for the wall paint to dry after painting, and if you walk on the wooden floor during this time, you may bring the wall paint that has not yet dried to the floor, which will also contaminate the floor.

In the local market, the ** of wall paint is roughly between 30-60 yuan per square meter, and the specific ** will vary depending on the brand, quality, color and other factors. The ** of wood flooring is between 100-300 yuan per square meter, which will also vary depending on the brand, material, style and other factors.

Therefore, it is recommended that when decorating, the wall paint should be painted first, and the wall paint should be completely dried before laying the wooden floor. When painting the wall paint, you can lay a protective film on the ground to prevent the wall paint from dripping onto the ground. When laying wooden floors, attention should also be paid to protecting the walls that have been brushed to avoid scratching the walls during the construction process.

In this way, it can not only ensure the decoration effect, but also avoid unnecessary cleaning work and improve the decoration efficiency.

Kunming - [Kunming Decoration Strategy Guide].

Suzhou - [Suzhou Decoration Strategy Guide].

Hefei - [Hefei Decoration Strategy Guide].

Fuzhou - [Fuzhou Decoration Strategy Guide].

Beijing - [Beijing Decoration Strategy Guide].

Dalian - [Dalian Decoration Strategy Book].

Hangzhou - [Hangzhou Decoration Strategy Guide].

Shanghai - [Shanghai Decoration Strategy Guide].

Tianjin——[Tianjin Decoration Strategy Guide].

If you are laying a tiled floor, then lay the bricks first and then paint the walls; If you have a wooden floor, paint the walls first and then lay the bricks. This is because the floor tiles are protected after they are laid, and if the wall paint falls on the floor while painting, it can be easily removed.

You should first change the water to electricity to make it waterproof. Then lay tiles, pave the tiles, carpenter the ceiling, do furniture, and paint the wall with latex paint after the carpentry is completed. If you have a wooden floor, then finish painting the walls and then lay the floor.

After the wall is plastered with plaster powder, it is not possible to scrape water-resistant putty and brush latex paint. Check the floor leveling of the room, if the floor flatness is good, the corner of the ground can be leveled slightly. The developer of the rough house cement floor does well, just play a relevant role.

In the process of our home decoration, the cohesion and sequence of various processes are very important, the order of wall latex paint and floor laying, we all know that in general, the floor tiles are laid first and then the wall latex paint is painted, so if the floor tiles are not laid.

Latex paint construction technology:Eradicate the base layer of the big white, roll the wall, solid elasticity, out of the base yin and yang angle ink line, install PVC yin and yang angle strips and solid wood baseboards, base leveling, glue glass fiber grid, cloth base layer, large area of batch scraping, leveling plaster, batch scraping, putty twice, putty grinding. The decoration should first be planned, that is, according to the size and direction of the house, to design the design renderings that you are satisfied with.

For design renderings, there are two directions to choose, one is to find a professional design company or decoration company to design. Interior decoration is not a special case, basically follow the decoration order of "top first, then wall, and on the ground". At the same time, the decoration construction sequence of different spaces should also be reasonably arranged in combination with the characteristics of decoration materials.

The above is the approximate entry steps of decoration, but the specific construction sequence may be slightly different from the construction methods and materials of the workers, but the main idea is like this, you can do reference. When decorating, we should follow this principle: first up and then down, first inside and then outside.

So, it must be painted with latex paint first, and then the wooden floor is laid. The reason is that when you paint the wall, the paint chips will fall on the floor, and it will be more difficult to clean it at that time. The decoration process is well coordinated, in order to give the home a fresh and comfortable decoration effect, such as the arrangement is disordered, the details are problematic, the home will also present a messy and vulgar effect, exquisite people decoration pay special attention to the coordination of the engineering process.

Brush latex paint first, because it requires a drying process after painting, and it often drips when painting, and it is very troublesome to clean, so it is most correct to lay the wooden floor after painting.

I must have to lay a wooden floor first. If the order is reversed, the walls may be damaged when the floor is laid, and it may be necessary to touch up the painting, which will destroy the integrity.

It's better to brush latex paint first, because when painting, workers need to go up the ladder at high places, and some of them will be drenched on the ground during the painting process. The floor can't help but be so bad. So paint first, install the switch socket panel and light fixtures, and then consider laying the floor.

It should be noted that it is recommended to cure and dry for a few days after painting. Do something else, otherwise the wall paint will not dry, and it will be troublesome to stick to the dust of the later construction.

Of course, it is necessary to paint first, because when painting, it will inevitably fall on the ground with a lot of paint spots, and if you lay the floor first, it will be dirty.

There are many kinds of raw materials used in the decoration of new houses, mainly including wall decorative panels, wall paint, pavement paving raw materials, and wooden floors. Everyone should be very familiar with interior decoration, and there are not many people who really grasp it for spraying latex paint or installing wooden floors first. Interior decoration is in the order of steps, the order of steps is reversed, it is very easy to cause latex paint wall flowers, wooden floors are very easy to produce scratches and other conditions, according to the order of engineering construction is very important.

After the decoration steps are changed to water and circuits, the bathroom is made of waterproof materials three times, and the living balcony, dining room, kitchen, and bathroom are pasted with tiles and floor tiles, condensed and dried, and then the next procedure can be carried out. There are two kinds of wood flooring that are more commonly used in decoration, such as composite laminate flooring and empty frame pure solid wood flooring, so the processing technology in the middle is quite different, and the processing technology that is not needed is not the same, and the necessary construction environment is not the same, so there is great harm to the order of painting latex paint on the wall.

The construction technology of composite laminate flooring should first carry out the accurate measurement of the bottom layer of the pavement, mainly to inquire about the flatness of the pavement and the pavement condition, and then the floor leveling, the general rough house ground, if you need to pave the wooden floor, you need to level the ground again or do cement self-leveling; This was followed by the installation of moisture-proof mats and the paving of wooden floors. The interior decoration process is harmonious, so that the home can be given a refreshing and comfortable home decoration effect, such as the distribution disorder and what is the problem with the key points, the home will also show a messy and vulgar actual effect.

Exquisite interior decoration pays special attention to the harmony of the process flow of the project and the solution of key points, which is the prerequisite for home decoration and product quality, and is a major stage of success and failure of home decoration design. Spraying latex paint must be sanded with putty, which will cause large dust. There will continue to be dripping when spraying latex paint.

If the wooden floor is installed first, although the floor can be artificially covered with protective film maintenance, the smoke and dust will drift everywhere, and it will be particularly inconvenient to manage it in the middle and later stages. If the solid wood floor is also squeamish, it is difficult to repair after bumping.

Apply latex paint first, then lay wooden floors; When brushing latex paint, it is necessary to pay attention to hollowing and blistering, to keep the wall dry, to be tightly seamed when laying wooden floors, and to choose solid wood floors of the same material.

I think it's better to paint the walls first and then lay the floors. This allows for better protection of the floor and allows the walls to conform to the floor. It is necessary to pay attention to the problem of tiling, the fitting of the floor, the thickness of the latex paint, and the refresh method of the latex paint, and also pay attention to the cost.

I think you should paint it first, and be careful to wait until the walls are completely renovated before laying the floor.

In fact, decorating the house is not as simple as people think, there are many small details that need to be paid attention to, for example, in the process of decoration, paint and flooring are necessary to use, so what to do first, people are very curious, do the floor or paint first, many people say that there is such a problem, and you should know that the wood floor is good. Flooring or painting first? If your home is paved with floor tiles, if your home is paved with floor tiles, then, you should lay the floor tiles first and then paint the walls.

Floor tiles belong to the category of bricklayers, and the decoration order is followed"Whoever gets dirty comes first"The principle that the bricklayer first touches up the paint. There is still a reason for paving floor tiles, because when painting the wall, powder or latex paint falling to the ground will affect the setting rate of the floor tiles and the cement floor.

<>But after laying the brick wall, as long as you pay attention to the protection of the floor tiles, such as covering the floor tiles with paper shells and plastic films, even if the paint falls on the floor tiles, it is easier to clean up! If you have flooring in your home, if you have wooden flooring in your home, paint it first and then lay the floor. The same is true in renovation construction"Whoever gets dirty goes first"Laying wooden floors is commonly used by carpenters, and painters are commonly used before carpentry.

In addition, if you paint the wall first, it will be difficult to remove when the paint falls onto the wooden floor, and the floor is generally fragile, and it may also leave marks on the floor when cleaning. Moreover, the baseboard of the wooden floor is exposed, and the baseboard of the tile is hidden.

The scientific order of floor and wall decoration, if it is the floor at home, the scientific order is to paint the wall first, but don't end it! Then make the floor, and then make the wall after the floor is done. Because the corner of the wall at the junction with the floor is where the floor covers the wall, the final shape needs to be left behind the wall.

When should I lay wooden floors? After laying the floor, it is generally necessary to lay it again, because it is more troublesome to keep the wooden floor clean after it is done, and it is easy to be blown by hard objects. The process of renovation.

Hydropower transformation, floor tile paving, carpentry, painting, ingots processing (blowing putty, brushing latex paint), sanitary ware, lamps, wooden floors can be installed at the same time, professional cleaning, steam placed for a period of time, basically you can move in, basically that's it, when the floor tiles are paved in the future, you should buy cardboard back cover on it, protection and cleaning effect, cardboard is not expensive, a few dollars a piece, about every two square meters.

If it is a tile, the stone should be done first, otherwise the cement contains water, and the wall will be painted again, and after pasting the baseboard, you have to make up the paint. If it is a wood floor or stone plastic floor, roll coat the paint first, so that the paint will not stain the ground in one step.

In the process of home renovation, it is generally necessary to paint the latex paint before laying the floor. Because it is also likely to drip onto the floor during the painting process, it is difficult to clean.

I think you should apply latex paint first, because if you lay the floor first, the paint may drip onto the floor and it will be difficult to clean.

Latex paint should be applied first. This is because if you lay the wooden floor first and then apply latex paint, it will stain the wooden floor.

First, paint the wall first and then lay the floor tiles, which can better save the construction period and save the cleanliness of the floor tile surface. However, the floor tiles will be dusty, and foreign objects such as dust on the walls are also difficult to clean.

Second, lay the wooden floor first, then the order is to paint the wall first, and then lay the wooden floor before the furniture enters the field.

Third, the first tile is to lay the floor tiles first, and then the tile floor to protect, and then carry out wall construction, this must be noted, many of the previous construction did not protect the tile floor version, the later ground cleaning is very troublesome!

In short, it should be changed from water to electricity first to make waterproof. Then lay tiles, pave the tiles, carpenter the ceiling, do furniture, and then paint the wall with latex paint after the carpentry is completed. If you have a wooden floor, then finish painting the walls and then lay the floor.

I hope it can help you, and if you still have questions, click on the avatar and wait for you to tease

Brush latex paint first and then install the floor, because the process of painting latex paint will pollute the ground, and even if you install the floor first, even if you put a protective layer, you will accidentally stain the floor, and it is very troublesome to clean.

It is better to lay the floor first, clean it up after laying the floor, and then brush it, latex paint will be better.

In this case, you must first paint latex paint, and then lay the wooden floor, which is the last process.

Paint the latex paint first and then lay the wooden floor, so that it is better and will not stain the board.

First latex paint and then the floor, after the latex paint is good, the floor is installed and then the skirting board is used to seal the edges.