What kind of material should be the most suitable for bathroom water vapor?

Introduction: The water vapor in the bathroom is so heavy, you must choose the right material. There are many developers who recommend it to you, in fact, they also want you to do it once, but for the sake of insurance, you must do it yourself again, so that it is relatively strong, and it will not give you a headache in the future.

If you think that the water vapor is very heavy, you must do a good job of separating dry and wet. <>

In normal times, if you want to enjoy it more, you must let yourself be more satisfied. Many people don't know how to decorate themselves to be the most practical, so you also have to take a look at the choices of the public, their choices are the best. In the process of living, many people also hope that they can change according to their own situation.

If you want to decorate the bathroom, then you can make some design drawings first, because if you don't renovate, it may be more time-consuming and material-intensive, and the cost will be more than you expected. <>

If you smell something bad in the bathroom, you should also adjust it in time. Many people may not know that this is also because of the floor drain, so you must use some good pipes when choosing, and don't pour all the things into it. The walls of the bathroom usually have moisture because they will take a shower in it, but the moisture must be dissipated.

In the bathroom, you must choose to tile, otherwise the walls will get wet. Many people may not know what to do, so in the meantime you need to get rid of all the moisture. Bathroom tiles are not troublesome, and it doesn't cost much, so you can ask a decorator to help, and then when choosing materials, you should also ask people who know how to see what advice they give you before getting it.

The most fearful thing about buying a house is that you don't listen to anyone's advice, and you will blindly make a choice and regret it.

The bathroom should be waterproof, you can lay some tile floor tiles, and the bathroom door can choose a glass door or a stainless steel door, which is the most suitable.

PVC material should be chosen. This material is relatively good, the quality is also very good, the hardness is also very appropriate, and it is not easy to produce moisture.

Non-slip and moisture-proof materials should be chosen, and waterproof materials must be done when decorating the bathroom.

The bathroom should be waterproofed, perhaps with some tiled floor tiles, and the bathroom door should be made of glass or stainless steel, which is appropriate.

Although the wooden door is more textured and classy than other materials, why is it not recommended that you install it in the bathroom? Presumably, the reason is also very clear, considering that the bathroom is a heavy moisture place, even if the paint surface of the wooden door is good, it cannot withstand the long-term influence and erosion of water stains and air humidity, and it is easy to deform, expand, and the problem of poor switching.

What are the other doors to choose from besides wooden doors? Suitable for installation in the bathroom? That's what I want to tell you today.

To be practical, choose plastic steel doors

Now most of the family bathrooms are installed with plastic steel doors, although it is a little ugly, but it can be durable, the general service life is more than 30 years, and the sealing is relatively good, different from wooden doors, in a humid environment, it will not be easily corroded, moldy, rotten, moths and so on.

The important thing is that every time you clean it with oil, you can scrub it directly with laundry detergent or detergent with water, and the material is not delicate at all, so it saves trouble and effort every time you clean it. However, some poor quality plastic steel materials will have the possibility of deformation and discoloration. Owners who are not so poor in money should try to use high-quality brand materials as the first choice.

Aluminum alloy doors are more selective

The same metal door, the advantage of aluminum alloy door is that it is rich in variety, more selective than plastic steel door, and the frame and glass can be made into different sizes and specifications, which is very modern and simple and beautiful, and it is easy to maintain. Because there is an oxide layer on its surface, it has strong corrosion resistance, it is not easy to fade, and it does not need to be painted.

That's right, there are so many benefits! However, many people may think that its poor sealing is its only "failure", and it is not recommended to choose it as a material for outdoor doors and windows, and poor sealing means poor waterproofing. But if it is to be used as a bathroom door, I think it is okay, after all, most bathrooms will be set up with threshold stones now.

For aesthetics, choose the net red glass sliding door

Considering the privacy of the bathroom, it is recommended to replace the transparent glass with a rainbow material or frosted texture, which is very transparent and opaque, which is very suitable for dark guards with poor lighting.

If it is said that the entanglement comes and goes, after comparison, it is okay to install wooden doors for owners who still want to choose wooden doors, but there are two major prerequisites, we must do a good job in the separation of dry and wet bathrooms, as well as the waterproofing of wooden door materials.

The first choice is plastic steel door, the cost of this door is not high, the most important thing is that it is moisture-proof and not mildew, and it is not a type, followed by an aluminum alloy door, this kind of door has many benefits, and the main disadvantage is that the "sealing" is slightly worse, and then there is the Internet red glass door, it is best to use the most popular anti-fog glass.

Choose a door made of glass, even if it is affected by water vapor all year round, it will not break down, and the service life is very long. If it is other materials, such as wood, stainless steel, paint, moisture moisture will be wet all year round, which will damage the material of the door, and the life will be shortened.

Now there is a material called anti-fog glass. It is recommended when decorating the bathroom. The fog does not linger on this type of glass.

Generally speaking, the leakage water in the bathroom is a problem with the detailed structure of the building, and the three places of floor drain, wall corner, and pipe root are prone to gaps due to more interfaces, so these three places are generally more prone to leakage. In addition, if the connection between the bathtub drain and the sewer pipe is not tight, it is easy to create gaps and leakage. The waterproof material should choose a one-component environmentally friendly polyurethane coating, which is currently recommended by the Ministry of Construction.

Because the paint can tightly wrap the pipe and the ground, penetrate into the gaps, and will not shrink after drying, it is more suitable for small areas of houses with many pipes and gaps than rigid materials such as waterproof cement. When buying this kind of paint, you should choose brand paint, and the cost of materials per square meter is about 50 60 yuan.

It is understood that at present, some domestic brand polyurethane coating manufacturers have their own construction team, and the public can purchase coatings at the same time, requiring manufacturers to provide professionals.

In order to make the waterproofing period longer in the future, the paint generally needs to be brushed 3 times, so in order to make the paint dry enough, it is not possible to choose to do it in a rainy or humid climate. Generally, the drying period of one-component environmentally friendly polyurethane coatings is about 3 to 4 days.

Counting the one-component environmentally friendly polyurethane coating, the cement layer covered on the coating and the surface brick, the material per square meter generally does not exceed 400 yuan. In this way, a bathroom with a size of 5 square meters will cost about 2,000 yuan to re-do the waterproofing, and the bathroom facilities such as bathtubs that need to be reconfigured are calculated separately.

After the waterproof construction is completed, all the sewers of the bathroom should be blocked, and a "low wall" should be built at the door of the bathroom for water injection test, and the water injection height should be about 20cm. After 24 hours, if there is no leakage on the walls and floors around the bathroom, it means that the waterproof quality of the bathroom is very good. On the contrary, it is necessary to find out the leakage point and carry out repairs.

The walls should also be waterproofed. In order to achieve a better waterproof effect, the wall of the general bathroom should also be waterproofed about 30cm high to prevent water from penetrating the wall. The wall adjacent to the bathtub should also be waterproofed at a higher height than the upper edge of the bathtub, so as to be truly waterproof.

The decoration of the toilet depends on whether it is a decoration or a second decoration, whether there is a settling tank in a decoration, if there is, this place should be painted with special materials, and it is best to paint it once or twice with national standard single-component polyurethane. Of course, before painting, the base surface should be cleaned, and the root and corner of the pipe should be treated. Test the water after getting it, backfill if it does not leak, and then brush waterproof mortar or one-component polyurethane waterproof coating after leveling.

There is no other choice for the wall, that is, waterproof mortar, which is convenient for tiling, and the waterproof performance requirements are not so high.

If you choose the products of some regular waterproof material manufacturers, the waterproof effect is still very ideal. However, due to the fact that the bathroom area is generally small and there are many pipelines, we must pay attention to the decoration process during the decoration process.

We must pay attention to the water vapor!

Waterproofing the bathroom is the key!

Generally, the developer has already done a waterproofing when handing over the house, but for the sake of insurance, it is necessary to make a waterproof layer again (kitchen and bathroom!). Dubatech home improvement waterproof paint can be selected to try, sold on Jingdong, and construction is also included!

The wall and floor are best tiled, and the ceiling can be made of aluminum gusset.

1. Inspect and accept the appearance, variety, specification, packaging, size and quantity of materials, and form corresponding acceptance records.

2. Check the quality certification documents of the materials and include them in the engineering and technical files.

3. After the material enters the site, the material inspection report shall be issued according to the specification.

4. When all the indicators of the physical properties of the material meet the standards, it is qualified; If an index does not meet the requirements of the standard, the index should be re-sampled in the tested product for re-inspection, and the re-test result meets the requirements of the standard, and the batch of materials will be judged to be qualified.

5. Waterproof material. There are three main categories: waterproofing membranes; 911 polyurethane waterproofing material; New polymer cementitious waterproofing material.

The last category is divided into general-purpose GS waterproof materials and flexible JS waterproof materials. Among them, the universal waterproof material is suitable for the waterproofing of the indoor floor and wall of the family.

1. Bathroom decoration is a major event in home decoration, and bathroom waterproofing is a key point of its decoration design. The quality of the bathroom waterproof coating has a direct impact on the waterproof effect of the bathroom, so to do a good job of bathroom waterproofing, the first thing is to choose a good bathroom waterproof coating.

Second, the types of waterproof coatings in the bathroom.

1. Polyurethane toilet waterproof coating.

It is mainly liquid, and it is divided into two types: tar type and non-tar type. Non-tar paint is one of the most commonly used toilet waterproofing materials on the market today. It is a curing agent with non-tar substances, such as a curing agent composed of asphalt, additives and fillers.

This kind of toilet waterproof coating is divided into two groups, group A is the curing agent, and group B is the main component of the material. This material has stable quality, low pollution, good aging resistance, good adhesion and water enhancement.

When users buy this type of toilet waterproofing coating, they must buy two groups together and mix them. At present, non-tar waterproofing coatings occupy the majority of the market share, and consumers can easily buy them.

2. Cement mortar toilet waterproof coating.

As one of the emerging waterproof materials, it is also very popular with consumers, in fact, its material is a special adhesive (a bit like special glue) mixed with fine cement and sand dust.

3. Acrylic bathroom waterproof coating.

It is the earliest and largest application in eco-friendly paints and coatings. The biggest feature of this material is that it can be diluted with water to make a water-soluble material, and it is colorless and odorless (lacquer can be mixed with colorants as needed), but it is an unusually dense waterproof material after the conjunctiva.

4. Polymer polymer waterproof coating.

The materials are mostly made of rubber-derived multi-chain polymer materials. It has good ductility and elasticity. It is colorless and odorless, and has a good environmental protection type.

However, the characteristics of his rubber source are that it has great viscosity before drying, and any small bumps and contacts will be damaged by the waterproof film, and the thickness of the brush cannot be brushed, and it is basically transparent after drying, and the visual effect is not good. ?

It depends on which material you want to choose, if it is a bathroom, I suggest one: the permeable waterproof material of the **** decoration project of Xikelai, which is good. The waterproof material is not only natural in color, flexible in material, and full of comfortable quality of life, but also non-toxic and harmless, with almost zero formaldehyde release, which is a very healthy and environmentally friendly material.

When decorating the bathroom waterproof, it must be done, now suitable for the bathroom waterproof materials are more kind, common waterproof materials are waterproof membranes, mortar waterproofing agents and waterproof coatings, comprehensive waterproof material environmental protection, waterproof layer service life, waterproof construction difficulty, product cost performance and other factors, now the most widely used is waterproof coating.

Bathroom waterproof building is easy to coat waterproof, this waterproof green and environmentally friendly cost-effective.

1. Cement-based waterproof material.

If we want to make waterproofing for our bathroom, it is best to use some cement machine waterproof materials that are relatively safe, this waterproof material usually has acrylic emulsion and specific cement and mineral powder with yarn, this material is a material with a relatively high waterproof effectWhen we use this material, it is relatively safe to do waterproofing, and its waterproof effect is quite good.

2. High-elastic waterproof coating.

When we choose waterproof materials, we can also choose some high-elastic waterproof coatings, which are more suitable, and it is a high-performance waterproof coating through a combination of a variety of additives, and the waterproof effect is also very goodGenerally, it is used for toilets or floors and a wall when saving, waterproof and moisture-proof, which is a very good choice.

3. Composite materials.

When you are doing waterproofing, you can also choose some polymer high wear-resistant waterproof composite materials for decoration, this material has strong adhesion and elongation, and these things can be used on cement or asphalt surfaces for waterproofingAnd these waterproofs can protect our walls for more than 10 years.

When you decorate the house to do waterproofing, you must choose the appropriate materials to decorate it is more appropriate, but in the process of decoration, we must choose a professional waterproofer to help us do these waterproof things It is more reasonable, because a professional decoration master can better help our house get better results in the decoration process. No matter what materials we choose, we must not be greedy for cheapness, choose some inferior products, and it is not suitable to decorate the house.