Is it okay to use milky white glue to adjust the ash and repair the cracks in the wall of the house?

Updated on home 2024-07-14
10 answers
  1. Anonymous users2024-02-12

    No, the bonding strength of milky white rubber is not so high, which will cause secondary cracking, it is recommended to use engineer A6 fine crack sealing paste for repair, high bonding strength, in order to achieve the purpose of repair.

  2. Anonymous users2024-02-11

    First of all, if you find a crack in the wall of your home, you should first find the cause and then solve the problem one by one according to the cause. The main reasons for the cracks are: the base is not firm, the wall is too thin, the structure of the house is unreasonable, and the wall is not dried to paint the cement!

    Next, after finding the cause of the cracks in the wall, you can prescribe the right medicine, and take different measures to repair and treat them according to different causes.

    If the base is not solid, it is necessary to remove all the base and renovate the base layer; What's more, the cracks in the base layer of the wall are too large, which will seriously affect the safety of the family's life, and it is necessary to find the relevant real estate company to deal with it.

    If the base layer is firm, you can first observe whether the cracks under the crack have a tendency to expand, if not, you can directly use gypsum powder to repair it directly; If the crack is constantly expanding, it can be repaired with polymer repair mortar!

    Of course, if you find it difficult to take the time to fix these cracks, you can directly use wallpaper to decorate the wall to cover up the cracks. But it should be reminded that this method of covering your ears and stealing the bell must be used with caution.

    Tips: If there are cracks in the house of a friend's house, you must not take it lightly, maybe this crack is because of the problem of the whole house and cracks, do not pay attention to the final life safety problem will outweigh the loss!

  3. Anonymous users2024-02-10

    Hello dear, I'm glad to ask you this stupid question, you can use epoxy resin glue 1What glue is used for cement cracks Epoxy resin glue is usually used, and it is widely used, including metal, ceramic glass, plastic and other materials. And it is also excellent in pouring, plugging, anti-corrosion, and conductivity, so we often use it to repair.

    2.How to maintain the cement wall that has just been poured If it is a cement wall that has just been plastered, we try not to touch it with our hands, and we can only touch it after waiting for two or three days. Prudence.

  4. Anonymous users2024-02-09

    Summary. No, white latex is a cement mortar that can only be used to fill gaps in the wall, not to fill cracks in the pavement. The solution to the cracks in the pavement is:

    First of all, clean the cracks in the pavement, clean the debris in the cracks, and then rinse with clean water to ensure that there is no debris in the cracks; secondly, fill the cracks in the pavement, fill the cracks with an appropriate asphalt mixture, and compact them with a trowel; Finally, hot melt pavement cracks, heat the asphalt mixture, then pour it into the cracks, and compact it with a trowel to guarantee the integrity of the pavement.

    No, white latex is a kind of cement mortar, which can only be used to fill the gaps in the wall of the bridge, not to repair the cracks in the road surface. The solution to road cracks is: first, clean up the road cracks, clean up the debris in the cracks, and then rinse with clean water to ensure that there is no debris in the cracks; secondly, fill the cracks in the pavement, fill the cracks with an appropriate asphalt mixture, and compact them with a trowel; Finally, hot melt pavement cracks, heat the asphalt mixture, then pour it into the cracks, and compact it with a trowel to guarantee the integrity of the pavement.

    Fellow, I really didn't understand, I can be more specific.

    No. White latex is a kind of exterior wall insulation material used on the surface of buildings, which can effectively block heat and improve the thermal insulation performance of buildings, but cannot be used to repair road cracks. The repair of pavement cracks generally uses cement mortar or asphalt mixture, which can effectively fill the pavement cracks, and has good crack resistance, can resist temperature changes and humidity changes, so as to prevent the expansion of pavement cracks.

    In addition, when repairing pavement cracks, it is also necessary to pay attention to the cleaning of the pavement, remove the debris on the pavement, and check the temperature of the pavement to ensure that the dust temperature of the pavement is within a certain range to ensure the quality of the mating material. In short, white latex can not be used to repair pavement cracks, and pavement cracks need to use cement mortar or asphalt mixture, and flush Zen and search to pay attention to the cleanliness and temperature of the pavement to ensure the quality of the caulking material.

  5. Anonymous users2024-02-08

    Summary. Yes, white latex can be used for pavement crack repair, but only for mild cracks. For severe cracks or extensive damage, it is recommended to use professional pavement repair materials.

    When using white latex for crack repair, the crack should be cleaned first, a layer of white latex should be applied to the crack, then a filler (such as gravel, sand, or gravel) should be sprinkled, and finally a layer of white latex should be covered to close the crack. After repair, make sure the pavement surface is flat and wait for the latex to dry.

    Yes, white latex can be used for pavement crack repair, but only for mild cracks. For severe cracks or extensive damage, it is recommended to use professional pavement repair materials. When using white latex for crack repair, the crack should be cleaned first, a layer of white latex should be applied to the crack, then a dry and filled material (such as gravel, sand or gravel) should be added, and finally a layer of white latex should be covered to seal the crack.

    After repair, make sure the pavement surface is flat and wait for the latex to dry.

    Excuse me, but please go into more detail?

    White latex is a white, polymer-containing liquid gelatinous liquid. It is usually made from acrylic emulsion type differential fronts, but it can also be made from other synthetic materials. White latex has good adhesion and strength, and is widely used in home decoration, picture frame making, paper pasting and handicrafts production.

    It is waterproof, mildew-resistant, abrasion-resistant, and durable, making it ideal for use indoors and outdoors.

  6. Anonymous users2024-02-07

    Summary. White latex is a polymer material whose main components are latex and fillers, which are commonly used in construction and road maintenance. Its characteristics include water resistance, acid resistance, alkali resistance, wear resistance, good elasticity, etc.

    For cracks on the road, white latex is generally used to fill them, which can effectively prevent the cracks from expanding, and can also alleviate the problems of water penetration and corrosion of the pavement structure. However, it should be noted that white latex is only suitable for small area pavement maintenance, and if the pavement crack is too large, it is recommended to use a more professional method to deal with it. At the same time, in the construction process, it is necessary to pay attention to quality control to ensure that the filled pavement has good durability and service life.

    White milk wheel rubbers are a polymer material whose main components are latex and fillers, which are commonly used in construction and road maintenance. Its characteristics include water resistance, wax resistance, acid resistance, alkali resistance, wear resistance, good elasticity, etc. For cracks on the road, white latex is generally used to fill them, which can effectively prevent the cracks from expanding, and can also alleviate the problems of water penetration and corrosion of the pavement structure.

    However, it should be noted that white latex is only suitable for small area pavement maintenance, and if the pavement crack is too large, it is recommended to use a more professional method to deal with it. At the same time, in the construction process, it is necessary to pay attention to quality control to ensure that the filled pavement has good durability and service life.

    Fellow, I really didn't understand, I can be more specific.

    White milk wheel rubbers are a polymer material whose main components are latex and fillers, which are commonly used in construction and road maintenance. Its characteristics include water resistance, wax resistance, acid resistance, alkali resistance, wear resistance, good elasticity, etc. For cracks on the road, white latex is generally used to fill them, which can effectively prevent the cracks from expanding, and can also alleviate the problems of water penetration and corrosion of the pavement structure.

    However, it should be noted that white latex is only suitable for small area pavement maintenance, and if the pavement crack is too large, it is recommended to use a more professional method to deal with it. At the same time, in the construction process, it is necessary to pay attention to quality control to ensure that the filled pavement has good durability and service life.

  7. Anonymous users2024-02-06

    Cracks in the white ash of the wall are a common problem in the house, and if not treated properly, the cracks may become bigger and bigger, and even cause the wall to collapse in serious cases, threatening the safety of the house. Therefore, it is important to deal with the cracks in the white ash of the wall in time.

    1. Remove the plaster and gypsum powder from the cracks.

    The first thing to do is to remove the plaster and gypsum powder from the cracks to prevent voids during the filling process. Cracks can be cleaned by scraping off the plaster and plaster powder with a shovel or scraper.

    2. Fill the cracks.

    Apply plaster powder to the cracks and slide them with a scraper so that they fill the cracks. Then use a scraper to gently scrape along the filled cracks. Note that in the process of filling the cracks, the texture of the gypsum powder must be uniform, otherwise it will cause uneven cracks.

    3. Grinding and coating.

    After the gypsum powder is dried, sandpaper is used to sand it slightly to smooth the surface and scrape off any excess gypsum powder and dust. The cracks are then applied with a paint similar to the color of the wall. Several coats are required to cover the cracks thoroughly while maintaining consistency with the surrounding wall.

    In short, cracks in the white ash of the wall are a very common phenomenon, and it is not difficult to deal with them, but you must pay attention to the details. If you encounter a poor amount of holes or large cracks in the wall, it is recommended to ask a professional engineer to deal with it. This can better ensure the safety and stability of the wall.

  8. Anonymous users2024-02-05

    How to get cracks in the white walls of the renovated house: 1. Temperature cracks. The renovation was less than a year old, and the climatic reasons, alternating between hot and cold, led to cracking of the wall.

    For the wall structure, the floor and the masonry play a role in mutual constraints, and with the sudden cooling and heating of the outside temperature, the floor and the masonry may be deformed due to the different expansion coefficients. The masonry itself has a limit value of tensile and shear strength, and when the temperature induction force exceeds this limit, cracks will appear in the masonry, which is the temperature crack. Remedy:

    It can be repaired with professional crack repair adhesive, and 3Trees Joint Master is recommended, which has particularly strong adhesion and good toughness, and is used by many industry masters. It can effectively prevent the cracking of the binder material, and the product also has the advantages of fast shaping, anti-sagging, no sagging, easy grinding, no yellowing, and good chemical resistance. Second, latex paint cracks.

    When building the wall and painting the wall, it will involve the ratio of cement, sand, putty, latex paint and water, which have certain proportion standards, so when proportioning materials, it must be carried out in strict accordance with the standard requirements, and at the same time according to the maintenance cycle to maintain, otherwise it is easy to cause cracking of wall paint. Remedy: 1. If it is only a crack in the surface paint film, use fine sandpaper to polish the crack off, choose the wall paint of the same color, and repaint it.

    2. Regarding the decoration and maintenance of the wall, it is recommended to choose a big brand of latex paint to ensure the material and quality, and also pay attention to whether there is after-sales maintenance service. 3TREES' deodorant 5-in-1 wall paint is based on high-quality deodorant emulsion, which has the function of covering micro-cracks, including covering micro-cracks, scrubbing resistance, doubling mildew resistance, alkali resistance, and long-lasting brightness of the wall, so as to protect the wall in all aspects.

  9. Anonymous users2024-02-04

    Cracks in white plaster walls are a common side problem, and if not repaired in time, they will cause damage to the wall and affect the aesthetics. Here are some ways to repair cracks in white plaster walls:

    1.Clean up cracked areas: Use a broom and vacuum cleaner to clean cracked areas and make sure the ground is clean. If there is loose white ash, it needs to be removed.

    2.Crack Enlargement: Use a tool to propagate the crack so that it becomes a V-shape, cleaning the inside of the crack.

    3.Apply plaster: Use plaster to fill the cracks.

    First, pour a certain amount of gypsum into a large bucket, add water and stir well. Add a little water or plaster to make sure you get a paste. Use a spatula to place the mixture into the crack.

    Use a hammer to knock out the area around the crack. Let it dry indoors and overnight.

    4.Sanding with sandpaper: Sanding the plaster filling with medium or fine sandpaper. Flatten the edges and wall surfaces.

    5.Coating: Apply a layer of putty to level the cracked area with the surrounding wall surface. After the putty is dry, apply a primer and then a topcoat. Avoid using paint that is too thick, otherwise it is prone to cracks.

    6.Wait for drying: After 72 hours of drying, gently sand with fine sandpaper to make the repaired wall surface smoother.

    The above is the method of repairing the cracks on the white ash wall, it should be noted that after the repair, you need to wait for the paint to dry completely before proceeding to the next step, otherwise it will affect the repair effect. In addition, repairing cracks in the wall requires patience and meticulousness, and it cannot be done hastily, otherwise it will cause damage to the wall.

  10. Anonymous users2024-02-03

    1. Deal with the abnormal situation at the grassroots level. For example, the soft part of the surface should be removed; For larger holes, polymer cement putty should be used to fill them in multiple times; For larger cracks, the cracks should be cut into a triangular wedge with a wheel key cross-section (the width and depth of the crack should be about 10mm), and then the joint repair should be made with putty; If there are mortar bumps on the surface, they should be removed or smoothed.

    2. The entire wall is full of an elastic breast. For those who have waterproof requirements, you can use the elastic waterproof putty produced by Chengmei Coatings.

    3. Pave the mesh cloth for strengthening treatment, and pay attention to the uniform thickness when coating in batches. , and then a full batch of two elastic putty.

    4. A full batch of two ordinary putty, the same attention should be paid to the thickness of the key when coating it.

    5. Apply the paint according to the normal method.

Related questions
10 answers2024-07-14

How to repair cracks in the wall is a common problem, but it is also necessary to distinguish the situation before taking measures. Generally, the plastering layer, wall paint layer or wall structure layer is prone to cracks. Cracks in the paint layer are easier to solve, sanded with sandpaper, and then applied with the same color topcoat. >>>More

10 answers2024-07-14

Glass glue, hit with glass glue, glass glue is relatively sticky, not easy to crack, modern people prefer to use it.

17 answers2024-07-14

The construction quality problem is also caused by the developer and the construction unit, the construction unit in the construction materials, the construction process, the technical links are not strictly operated, and the developer intervenes to reduce costs. However, if it is caused by quality reasons such as foundation subsidence, if it is only a crack on the surface of the paint film, you can use fine sandpaper to polish the crack off, choose the same color wall paint, and repaint it. >>>More

22 answers2024-07-14

Of course, the cracks in the house are considered dangerous houses, and such a house cannot be continued to live in. For the sake of their own safety, such a house should be repaired quickly, or demolished and rebuilt.

7 answers2024-07-14

After the house is handed over, it is necessary to carry out a house inspection, and the house inspection finds quality problems such as cracks in the house, how to make the developer compensate? What if there are cracks in the house after a home inspection? Generally, the compensation shall be borne by the developer, and the legal route should be taken if the situation is more complicated. >>>More