What should I do if I find that the exterior wall of the bedroom is leaking inside, and the plastic

A leaky house is annoying, and if your house is still under warranty, you can find a developer or property, but you have to know that it is useless to look for them, not to mention that they have been here twice. Now the only thing that matters is that you have to solve the water leakage problem, there is no need to make the relationship very stiff, and Bijing is a person who lives not far away.

Although the water leakage is very annoying, it is not bad to smelt, as long as the cause of the leakage is found, it is not difficult to smelt. At present, there are companies on the Internet with technical guidance + products + users do their own not to plan, do not dismantle to solve the water leakage, I heard that there is a building called Amazing Rich on the Internet, you can also go up to see, maybe you can easily help you solve the problem of water leakage.

Chaoyang Quality Supervision Station complains, it is the developer, not the property, you should find the developer, just recognize the developer, the developer to find who to repair you is his business, the developer does not care about the complaint. In addition, if the same place is not repaired twice, you can ask someone to repair it, and the cost is out of them, or it is not a 5-year warranty period, at your own expense! Provide free professional technical consultation for concrete waterproof leakage repair.

I'm going to give you a good piece of advice, you're in a similar situation to me, and if it's me, call the news night flight or some other news program and make sure someone does it for you.

News Night Flight: 0451-82890000

FYI.

Find the developer first, and if the developer is not responsible, go to the building committee.

There is a home repair**.

1. Use styrofoam for maintenance. Styrofoam is very effective in plastic steel windows, which can be filled in the gaps in the windows and then sealed with sealant. 2. Replace windows.

If the window has been deformed or the hardware sealing has not been tight, the plastic steel window should be replaced. 3. Adjust the position of the bead. In the case of water leakage in the window, most of the reasons for holding the celery are that the position of the strip has changed, so adjust it to the appropriate position or fix it with sealing roller.

1.Leakage problem at the splicing of plastic steel doors and windowsSome windows need to be made into a window type with the upper part fixed and the lower part pushed, especially the balcony, that is, it should be spliced up and down, and left and right splicing, and these windows often have errors in the production, and the size of the middle of the frame and the two ends are unequal, and they are X or O shape. There are gaps in the splicing parts when combined, which becomes a hidden danger of leakage.

2.Water leakage at the glass strip of plastic steel doors and windowsThe reason for this phenomenon is, firstly, the sealing strip is not pressed tightly, and secondly, the fixed frame fan does not make drainage holes.

Precautionary measures:First, we should not only choose the best sealing strip, but also choose the sealing strip that matches the profile.

Second, the size of the bead is accurate and does not leak gaps.

The third is to make drainage holes on the outside of the lower part of the window sash and the fixed window. The upper part of the air pressure balance hole, the glass must be installed under the glass to dredge the rainwater.

Fourth, the sealing strip interface must be selected in the upper part, and it is best to connect it with glue.

In order to prevent rainwater leakage, a small number of door and window factories install window sash strips outside. Although this is not standardized, it has a certain effect on waterproof leakage. The disadvantage is that the installation of anti-theft is not effective and unsafe.

Legal analysis: first check whether it is within the warranty period, if it is within the warranty period, you can negotiate with the developer and ask it to repair it. If the developer refuses to do so and the two parties fail to agree on the repairs, you can sue the developer for compliance.

At the same time, you can also claim compensation from the developer for the damage caused to your property due to the quality of the house.

Legal basis: Civil Code

Article 713 The lessee may request the lessor to repair the leased property within a reasonable period of time when it needs to be repaired. If the lessor fails to perform the maintenance obligation, the lessee may repair it by itself, and the maintenance cost shall be borne by the lessor. If the use of the leased property is affected by the maintenance of the leased property, the rent shall be reduced or the lease term shall be extended accordingly.

Article 714: The lessee shall properly keep the leased property, and shall be liable for damages if the leased property is damaged or lost due to improper storage.

Windows are an important part of the house, we need to use it to attract outdoor sunlight in our home life, and we also need to use it to ventilate. However, it is inevitable to encounter various problems during use, such as water leakage. So, what to do about a leaky window in your house?

What are the causes of leaking windows in houses? Let's find out together.

If it is caused by the gap between the window frame and the wall and the window sill, then you only need to re-seal the gap. However, before sealing, the original seal should be cleaned first, and then filled with weather-resistant glass glue for sealing, and finally the gap should be sealed with cement mortar to make it waterproof.

What are the causes of leaking windows in houses.

1. The window is loose and deformed, causing water leakage.

If there is a loosening between the window and the frame, it will cause water leakage. There are two main reasons for this phenomenon, one is that the window will also be connected with resonant vibrations when the door is closed, and the gap between the window and the wall will become larger and larger over time, and finally lead to water leakage. On the other hand, it is caused by the poor quality of the window, because the poor quality of the window is not enough in terms of strength, it is easy to deform, and after a long time, it will cause leakage due to the cracking of the mortar layer at the edge of the window frame.

2. Water leakage caused by non-standard window installation.

Water leakage can also occur if the window installation is not standardized, such as the lintel, window sill without a drip groove or the slope of the running water. Generally speaking, if the outdoor window sill is higher than the indoor window sill board, and the window sill plate is accommodated with the plastering layer and is not made of the downstream slope or the direction of the downstream slope is facing inward, these defects will cause the window sill to leak water.

Article summary: The above is all about what to do if the house window leaks and what are the reasons for the house window leakage, I hope it will be helpful to everyone. If you want to know more about it, please stay tuned to Qeeka Home.

Hello, dear, window wall leakage causes + solutions: 1. The window sill does not make a slope: Now that the window is newly installed, the window sill will generally make a drainage slope, so that it can be convenient and rapid drainage, and there is no stagnant water that reduces the possibility of water seepage

This process is generally after the installation of the window frame, by the mason to carry out the slope painting, the inner window sill is generally 2-3cm higher than the outer window sill, and then it is necessary to do two more times of waterproofing, and finally paste tiles, 2, the window sill waterproof layer is destroyed: many old houses, when replacing the window, there is no waterproofing, the stove fiber or the previous waterproof layer is implicitly destroyed, eroded and aged, can not play the role it should have, if there is a little water, it will seep into the indoor wall, After that, it will only get more and more serious, solution: if the situation is not too serious, you can use the plugging king to brush the corners first, and then brush the waterproof paint several times after drying.

If the leakage is more serious, it is recommended to knock off the previous window sill and repaint it to do waterproofing, but the cost will be relatively high, 3. The drainage hole of the window groove is blocked: we carefully observe our windows, and we will find some drainage holes in the window groove, so that the design can ensure that the water in the groove can be discharged to the window in time to reduce the risk of infiltration into the room. However, once this hole is blocked, once the water is full, it will flow down the wall into the room

This is relatively simple, check whether there is a foreign object blockage inside, if there is a tool to clean out the foreign matter inside, 4, there is a gap between the cracked window and the wall: the window has been used for a long time, or the quality of the window itself is problematic, there will be some deformation and loosening. The deformation of the window frame will lead to the cracking or even falling off of the mortar, and the window frame will produce gaps, which may cause water leakage

First clean up the cracked place, and then use the weather-resistant structural adhesive to hook the joint, and then see if the situation has improved, thank you for your consultation, I am very happy to answer for you, I hope to help you, I wish you: happy life, smooth work, safe and healthy!