How to lay the moisture proof film on the back of the wardrobe, and whether there are any side effec

The back of the wardrobe is covered with a moisture-proof film to avoid water and protect the wardrobe.

If you want to prevent moisture on the north side of the wardrobe, you can paste moisture-proof film, with a rubber back, or with a tin foil with a rubber back.

1. Keep away from water sources, and keep the back panel of the wardrobe away from water sources. Another reason for the mold on the back of the cabinet is often because the wall behind the cabinet is damp, and the other part of the wall is the water source or the kitchen, bathroom and other humid areas, in this case, the wardrobe is often moldy, especially when the waterproofing of the home is not done, it is best to remove the wardrobe and place it in a different position; You can also put some dehumidifying things (such as dehumidifiers) in the wardrobe to prevent the wardrobe from getting wet.

2. Place quicklime, the air is humid and easy to cause mold on the back panel of the wardrobe, then we can put some quicklime at home, which can not only effectively prevent moisture, but also have the effect of disinfection. If the humidity in the wardrobe is too heavy, you can put a tungsten light bulb in the wardrobe and turn it on when it is wet, which can effectively reduce the moisture in the wardrobe and keep the wardrobe dry.

3. Placing dehumidifying objects and placing boxed dehumidifiers is also a good way to prevent mildew, after all, the mold of the back panel of the wardrobe is caused by moisture, and the dehumidifier in the wardrobe can absorb the moisture in the air inside the cabinet, maintain the dry environment of the cabinet, keep the clothes in the cabinet dry, and easily achieve the effect of moisture and mildew. In addition, tea lovers can also put dried tea leaves into gauze bags and scatter them everywhere, which can not only remove musty smells, but also make clothes exude a burst of fragrance; The coffee grounds left over from brewing coffee also have the dual effect of moisture absorption and deodorization, and the coffee grounds are dried and tied tightly in a clean gauze bag or old socks to become a simple dehumidification bag. In addition, there are bamboo charcoal bags and other small objects used to prevent moisture and mildew are suitable for placing in the wardrobe, mothballs are also the choice of many people, but the smell of mothballs is not good for babies and fetal health, and it should be used to pay attention.

4. When the weather is humid, try to turn on the air conditioner or dehumidifier as much as possible. Opening windows does ensure air circulation, but in the wet season, opening windows is a big no-no. When humid air hits, never open the windows to breathe.

The south is very humid, and it is often necessary to take out the clothes to breathe and see the light, so that it will not become moldy. (The last thing is to check whether it is caused by the wall, if it is moldy from the outside in, so that you have to find a way to solve this part of the problem, and the wardrobe should not be too close to the wall.)

The back panel of the wardrobe is pasted with a moisture-proof film, and the bathroom wall is not waterproof, and there is a risk of water leakage, mold, and moisture return in adjacent places caused by wall leakage.

Wardrobe is a cabinet for storing clothes, usually made of stainless steel, solid wood (wood incense board, solid wood particle board, MDF), tempered glass, hardware accessories as materials, generally to cabinets, door panels, silent wheels, door curtains as components, built-in clothes rails, trouser racks, baskets, disinfection lamps and other accessories, using punching, assembly, riveting, welding and other processes.

It has the functions of flame retardant, rat-proof, seamless cockroach-proof, dust-proof, moth-proof, moisture-proof, clean and beautiful, easy to move, etc., and has large-capacity intelligent disinfection wardrobes, non-power glass cabinets, stainless steel wardrobes, ultraviolet disinfection and cleaning wardrobes, moisture-proof multi-functional wardrobes, men's and women's lockers, dry and cockroach-proof wardrobes, folding wardrobes, and simple wardrobes.

The common ones are casement doors, sliding doors inside and outside the cabinet, etc., and the plates used in the wardrobe are generally stainless steel, metal, wood, etc., which is one of the commonly used furniture in the family.

Generally, the wardrobe cabinet body is made of 18mm thick materials (particleboard, MDF, solid wood board, composite multi-layer board, finger joint board); And the door panels; In general, hardware is matched for wardrobe manufacturers, and they do not produce it. There are also a few businesses that produce their own hardware for wardrobes.

Wardrobe installation needs to pay attention to moisture-proof, should the wall-mounted wardrobe be pasted with moisture-proof film? Today, I will answer them one by one for you.

Generally speaking, there is no need to paste moisture-proof film in the wardrobe, just do a good job of daily moisture-proof.

1. Keep away from water sources.

The back panel of the overall wardrobe is kept away from the water source. Another reason for mold on the back of the cabinet is often because the wall behind the cabinet is damp, and the other side of the wall is a water source or a more humid area such as the kitchen and bathroom. Therefore, it is best to move the whole wardrobe out of the way and put it in a new sullen position.

You can also put some dehumidifying things (such as dehumidifiers) in the overall wardrobe to prevent the whole wardrobe from getting wet.

2. Place quicklime.

Humid air is easy to cause mold on the back panel of the whole wardrobe, so we can put some quicklime at home, which can not only effectively prevent moisture, but also have the effect of disinfection. If the moisture in the whole wardrobe is too heavy, you can put a tungsten light bulb in the whole wardrobe and turn it on when it is wet, which can effectively reduce the moisture in the whole wardrobe and keep the whole wardrobe dry.

3. Place dehumidifying objects.

Placing boxed dehumidifier is also a good way to prevent mildew, after all, the mold on the back panel of the overall ante Jingshen wardrobe is caused by moisture, and placing dehumidifier in the overall wardrobe can absorb the moisture in the air inside the cabinet, keep the dry environment of the cabinet, keep the clothes in the cabinet dry, and easily achieve the effect of moisture and mildew prevention.

After the wooden furniture is damp, it is easy to mold, but also easy to deform, need to do a good job of moisture-proof treatment, so how to do the moisture-proof treatment behind the wardrobe? I believe that many netizens are very interested in this issue, let's take a look.

1. If you want to do moisture-proof treatment behind the wardrobe, you can brush moisture-proof paint on the back panel, or paste a moisture-proof film, which can effectively protect the solid wood board from deterioration or mildew due to moisture.

2. You can also put some quicklime, moisture-absorbing boxes, activated carbon and other hygroscopic items in the wardrobe to keep the wardrobe dry.

3. It is very important to dry clothes, sometimes the clothes are not completely dried, so they are put in the wardrobe. This will deepen the humidity of the wardrobe, which can lead to mold on the clothes.

Therefore, you must dry your clothes thoroughly before putting them in the wardrobe, which can keep the wardrobe dry and avoid dampness and mold in the wardrobe.

Summary. Kiss! Hello, a blessing, a warmth, a touch.

Have a grateful heart. Life is full of touching! Your question has been received, it will take a little time to type, please wait a moment and please do not end the consultation.

You can also take this time to provide more effective information so that I can better answer for you. Hope mine can solve your problem and sort out the answer for you right away, please wait a moment!

Kiss! Hello, a blessing, a warmth, a touch. Have a grateful heart.

Life is full of emotional impulses! Your question has been received, it will take a little time to type, please wait a moment and please do not end the consultation. You can also take this time to provide more effective information so that I can better answer for you.

I hope mine can solve your problem, and immediately sort out the answer for you, please wait for a while!

Hello, glad to answer for you. 1.To prepare the wardrobe first, the sticker ready, if the previous surface of the wardrobe sedan with direct paint, to scrape off all the paint, when scraping, be careful, try not to hurt the surface of the wardrobe.

After removing all the lacquer, rinse the furniture with water, wait for it to dry naturally, and then wipe the dust off the wardrobe with a clean cloth.

Kiss! Hello, a blessing, a warmth, a touch. Have a grateful heart.

Life is full of emotional impulses! Your question has been received, it will take a little time to type, please wait a moment and please do not end the consultation. You can also take this time to provide more effective information so that I can better answer for you.

I hope mine can solve your problem, and immediately sort out the answer for you, please wait for a while!

1. How to lay the moisture-proof film on the back of the wardrobe?

Place the wardrobe with the back side up, spread the moisture-proof film on the back of the wardrobe, and the moisture-proof film seams need to be overlapped for laying. After the moisture-proof film is paved, the moisture-proof film can be fixed with structural adhesive or self-tapping nails.

2. What are the ways to prevent moisture in the wardrobe?

1. Don't overload your clothes. Clothing contains a certain amount of moisture, especially natural materials such as wool. If it is piled up in large quantities, there is no room for moisture to escape and it stagnates in the pile of laundry.

Even if you put a dehumidifier, leave a passage for the air. In a wardrobe with drawers, don't let the clothes cling to the edges, you can put a bamboo curtain to separate a little space.

2. Choose a place according to the material. If it is a wardrobe with drawers, the lower layer can put chemical fiber, cotton and linen and other clothes that are not afraid of moisture, and the upper layer can put silk, wool, cashmere and other clothes, which are both moisture-proof and insect-proof. Genuine leather goods should be hung on hangers, not next to each other, and preferably away from the lower levels of the wardrobe.

3. Frequent ventilation. Even if you put in dehumidifier, if the wardrobe door is closed all year round, it will be difficult for moisture to escape. It is recommended to open the wardrobe door regularly and put the electric fan in front to blow to achieve the purpose of moisture removal.

4. Don't put the clothes you just took off into the closet. Some clothes are not dirty after wearing them once, and they don't want to continue wearing them, so they put them directly in the closet. When it's humid outside, it's best to hang your clothes in your room and let them dry overnight before putting them in your closet.

5. When the wardrobe has mildew, you can blow the fan directly into the wardrobe to achieve rapid dehumidification. Wipe off the mold with clean water and brush the varnish again, so that you can effectively prevent further mold. Sometimes, due to the problem of paint, it can be cleaned with petroleum jelly and then wiped clean when it is moldy.

If you use plastic containers to pack clothes at home, you should pay attention to drying and breathing frequently, because plastic products will affect the quality of clothes after a long time. Sometimes stubborn mold needs to be scrubbed vigorously to get rid of it.

6. You can place a moisture-absorbing box, activated carbon, dried tea, lime, moisture-proof mat, etc. in the wardrobe to prevent moisture, or paste some newspapers on the inside of the cabinet door and the bottom of the wardrobe, or put the dry coffee powder in a cloth bag and put it in the wardrobe to absorb moisture. The dehumidification effect of newspaper and coffee powder is good, especially when used in closed spaces such as wardrobes, which not only absorb moisture and prevent mildew, but also help repel insects with the ink smell of newspapers.

The high-rise wardrobe of commercial housing does not need to be covered with moisture-proof film. Because there is no point in laying a moisture-proof film. Unless the ground is always waterlogged.

There is no need, there is no need to lay a moisture-proof film above the fourth floor