-
Zhihuijia tells you:
Solid wood wardrobe. Solid wood wardrobes are probably one of the most susceptible to them all. Nowadays, many solid wood wardrobes have undergone a strict drying process before leaving the factory, but this does not mean that they can not be protected from moisture.
To deal with the water droplets on the solid wood wardrobe, you can dip a little solid wood special cleaner on the dry cloth, which can form a protective film on the surface of the solid wood wardrobe and organize water vapor penetration to a certain extent.
Solid wood wardrobes are prone to swelling and mildew after being wet. In this case, you may wish to put a soap in a musty area, or put the dried tea residue in a gauze bag to help eliminate the musty smell.
Secondly, in normal times, you can also apply a thin layer of high-quality polish wax to the wardrobe, and gently rub it like leather to try to shine. This not only maintains the solid wood wardrobe, but also increases its brightness, but the choice of light wax must be cautious, and you must not use inferior products containing chemical corrosive ingredients.
Fabric wardrobe. In the early stage, the fabric wardrobe will be discolored and decolorized due to long-term moisture, and yellow spots or mildew spots may appear on the surface, and then, the elasticity of the fabric after moisture will be lost, the stretch strength will decrease, and the volume of the fabric will increase. After the wet period, the fabric will become brittle, the abrasion resistance will be seriously lost, and it will be easy to wear out.
Cloth is easy to adhere to dust, and dust removal should be done at ordinary times to avoid mildew in humid weather. For ordinary fabric sofas, if it is damp, it can be dried with a hair dryer or dryer, but pay attention to keep a certain distance between the hair dryer and the cloth surface. For fabric sofas with fine and complex workmanship, it is best to use a special vacuum cleaner to suck all the dust on its surface.
Leather wardrobe. The leather wardrobe is in a humid environment for a long time, and the surface color of the leather goods after chemical treatment is easy to change, and the leather becomes hard; Mildew spots can also occur in environments with humidity above 90%.
Before the arrival of hot and humid weather, you should first use a soft wet rag to remove the dust, and then rub a layer of mink oil, lanolin oil, leather oil and other leather wardrobe special protective oil on the surface, which can not only play a moisture-proof role, but also protect the color of the leather wardrobe. If there are mildew spots on the surface of the leather wardrobe, remove the mildew spots with a mold remover and apply leather maintenance oil.
Rattan wardrobe. The rattan wardrobe will turn black after long-term moisture, and it will rot in severe cases, and its toughness and solidity will be significantly reduced. If there is dirt accumulation in use, it is best to scrub it with salt water, which can not only remove the stain, but also make the rattan soft and elastic, and ensure the water absorption of the rattan.
In the case of moisture, it can not be pressed heavily, so as to ensure that its woven shape and its gap are not deformed, and to ensure that it shrinks to the original state after drying.
Wrought iron wardrobe. Wrought iron wardrobes will rust due to the increase in moisture, leading to decay. This type of wardrobe is best wiped with a dry cloth on a wet day to absorb excess moisture.
If the surface of the wrought iron wardrobe is corroded, you can use a dishcloth or toothbrush dipped in rust inhibitor to brush it off, and then wipe it with a dry cloth.
Pay attention to Zhihuijia Home Furnishing and buy wardrobes to Zhihuijia.
-
If you are moisture-proof in the wardrobe, you can buy the moisture-proof bag that is sold on the **.
-
There are special moisture-proof bags. But I personally don't think it's very useful, so you can buy it.
-
I am Ade, focusing on decoration knowledge sharing, if you have any decoration questions, please leave a message below, and 10 comments will be selected from time to time to send a full set of decoration process and decoration knowledge information worth 99 yuan. This issue mainly explains how to solve the moisture-proof treatment of wardrobes in decoration.
-
1. Keep ventilation and ventilation.
Keeping the room ventilated is conducive to keeping the room dry and fresh, and the cabinet is not easy to get damp and moldy.
2. Remove mildew.
When you find that the wardrobe is moldy, you should clean the moldy place, if it is not clean, you can use a damp cloth to wipe vigorously to remove the mold.
3. Use activated carbon.
The internal structure of activated carbon is loose and contains many small holes, which can absorb odors and moisture in the air, and the activated carbon can be placed in the wardrobe to prevent moisture.
-
The wardrobe is moldy and has a musty smell, mainly because the wardrobe is close to the bathroom or in a dark place, and the wardrobe is generally fixed on the back wall, and the back is not ventilated. To solve the mold of the wardrobe, it is the most important thing to open the cabinet frequently for ventilation. Wardrobe mold dehumidification is very important, wardrobe dehumidifiers, more common moisture-absorbing supplies, generally by calcium chloride particles as the main content, most of them also add flavor ingredients, so set dehumidification, aromatic, anti-mildew, deodorization and other functions in one, can effectively prevent the wardrobe from mildew, only need to put it in the cabinet when using.
In addition, it is useful to use lime to dehumidify and prevent mold. Wrap the lime in a cloth and place it in a corner of the wardrobe to keep the air in the wardrobe dry and also prevent the wardrobe from getting moldy!
-
Wardrobe moisture-proof can use mothballs. Mothballs have the effect of moisture and mildew resistance, and it is enough to place a few mothballs in the wardrobe.
-
Dehumidifier and desiccant can be placed.
Dehumidifiers, desiccants, etc. should be placed at the bottom of the wardrobe. Moisture is heavier than air and moves downwards, so the bottom of the wardrobe is a gathering point for moisture. Therefore, it is best to put the desiccant under the wardrobe, or you can spread newspaper or a dehumidifying pad on the bottom.
-
First, when we look at the mold in a wardrobe, we should first pay attention to clean up the moldy place, generally wipe it clean with a dry paper towel, or use a dry brush to clean the moldy place.
If you can't clean it up, you can wipe it vigorously with a damp cloth, which can often be very convenient to remove mildew.
Second, if mold is found, in addition to wiping the mold with a cloth, we also need to brush the varnish on it again, so that it can effectively prevent mold from growing again.
Mould is mostly caused by paint problems, so we can also use the rainforest to clean it and then wipe it with a clean cloth.
Third, the air is humid and easy to mold, so we can put some quicklime at home, which can not only effectively prevent moisture, but also have the effect of disinfection. If the humidity in the wardrobe is too heavy, you can put a tungsten light bulb in the wardrobe and turn it on when it is wet, which can effectively reduce the moisture in the wardrobe and keep the wardrobe dry.
Fourth, mold into our home after mold, will cause some respiratory diseases, in order to prevent this, you can put some desiccant in the wardrobe, can absorb the excess water in the wardrobe, so that the wardrobe is more dry.
At the same time, we can put some orange peel in the wardrobe, which can also play a refreshing and environmentally friendly effect, and at the same time, we should pay attention to opening the window from time to time for ventilation, and try not to use a humidifier indoors to prevent excessive moisture and affect the use of the wardrobe. After we usually mop the floor with a wet mop, we should also pay attention to opening the window to allow the moisture to be effectively dried.
-
1. Bamboo charcoal. Charcoal contains a lot of very small pores, and when water and air pass through, it will have an adsorption effect, and then achieve the effect of purifying air and water.
2. Citrus peel.
Dry citrus peels can be used to absorb moisture and can also be used as a fragrance pouch for clothes so that there is no musty smell in the cupboard. However, it is necessary to pay special attention to the use of citrus peel to dehumidify, if it is placed in a humid place, the orange peel will start to soften and even mold in about 10 days, so it is necessary to replace it diligently.
3. Baking soda.
When baking soda is placed in the closet, the main effect is deodorization. However, powdered baking soda also has a hygroscopic effect. Because it is difficult to clean up for fear of powder overturning. The way to use it is to put it in a small bottle, cover the opening with a paper towel, and tie it tightly with a rubber band.
4. Moisture-proof and fragrant.
Put some sachets and mothballs, in fact, some boards have their own moisture-proof function, such as Hexiang board, zero formaldehyde is used with confidence.
-
Use a wooden wardrobe, or roll it with that kind of powder to guess, I'm going to buy some better clothes, wardrobe, don't wear wet clothes in it, you know?
-
1. Clothes should be dried.
Many people have encountered this bad situation, that is, the wardrobe is moldy, mold stains the clothes, stains the clothes, and even damages, in fact, this is mainly due to the dampness of the wardrobe will be caused by mold, so the first thing we have to solve is that the clothes must be dried, and the clothes are thoroughly dried before being placed in the wardrobe, so that from that extent, the wardrobe can be kept dry and the probability of mildew can be reduced.
2. Keep ventilation and ventilation.
One of the reasons for the moldy cabinet is that it cannot be quickly ventilated and dried due to the lack of moisture, so we usually have to pay attention to opening the cabinet and expect indoor doors and windows, etc., to keep the room ventilated and breathable, which can help the room to stay dry and refreshing, and the cabinet is not easy to be damp and mildew, but pay attention to the weather conditions, if it is rainy and humid weather, try not to open the cabinet, close the doors and windows, refuse the moisture in the outside air to enter the home, and prevent the cabinet and the items in the cabinet from being damp and moldy.
3. Keep the wardrobe away from water sources.
Another reason for the mold of the cabinet is often because the wall behind the cabinet is damp, and the other part of the wall is the water source or the kitchen, bathroom and other humid areas, in this case, the wardrobe is often moldy, especially when the waterproofing of the home is not done, it is best to remove the wardrobe and place it in a new position; You can also put some dehumidifying things (such as dehumidifiers) in the wardrobe to prevent the wardrobe from getting wet.
4. Place dehumidification and mildew prevention objects.
Placing boxed dehumidifier is also a good way to prevent mildew, after all, the mold of the wardrobe is caused by moisture, and placing the dehumidifier in the wardrobe can absorb the moisture in the air inside the cabinet, keep the dry environment of the cabinet, keep the clothes in the cabinet dry, and easily achieve the effect of moisture and mildew.
In addition, tea lovers can also put dried tea leaves into gauze bags and scatter them everywhere, which can not only remove musty smells, but also make clothes exude a burst of fragrance; The coffee grounds left over from brewing coffee also have the dual effect of moisture absorption and deodorization, and the coffee grounds are dried and tied tightly in a clean gauze bag or old socks to become a simple dehumidification bag.
In addition, there are bamboo charcoal bags and other small objects used to prevent moisture and mildew are suitable for placing in the wardrobe, mothballs are also the choice of many people, but the smell of mothballs is not good for babies and fetal health, and it should be used to pay attention.
5. Lay out the newspaper.
Newspaper is a treasure, especially used in the wardrobe mildew and moisture-proof, spread newspaper at the bottom of the wardrobe, and even paste the newspaper on the inside of the wardrobe door, the newspaper can absorb moisture and mildew, the ink smell can also repel insects, and the newspaper can not be underestimated in the role of the wardrobe in moisture and mildew.
6. Anti-mildew formula paint.
This needs to be selected when home decoration, and the paint containing anti-mildew formula is used to paint the wall of the home, etc., which can effectively prevent mold germination and resist the growth of harmful bacteria, and make the dirt not easy to adhere, scrub resistant, and is more suitable for bathrooms and kitchens, basement walls are easy to damp and other places, reduce the humidity of the home environment, limit the breeding of mold, and keep the wardrobe dry without mildew.
-
It is best to choose some wardrobe brands with moisture-proof boards, which are mainly used in height cabinets. At present, I have compared Sophia, Good Guest, Kanoa, and Novi Family, and there are moisture-proof board options for Yishili.
-
You can hang more charcoal packets and stuff like that.
-
Nowadays, there are many desiccants in supermarkets that are specially designed for moisture prevention and dehumidification. The most common are the two types of dehumidifiers and dehumidifier kits. Many humidity absorbent boxes come in a variety of scents, such as lemon, lavender, and sweet orange, which can fill the home with fragrance, and are suitable for placing in large spaces such as living rooms, rooms, bathrooms and kitchens.
After a period of use, you can take out the contents of the humidity absorber box, buy bulk desiccant and put it in the box for reuse.
In addition, dehumidification bags made of absorbent resin and charcoal are more suitable for placing in small spaces, such as wardrobes, shoe cabinets and other confined spaces, where you can hang a bag of dehumidification bags to expel moisture. In addition, it is also quite interesting to make your own desiccant. Use a small cloth bag to pack an appropriate amount of lime, tie it into a small bag and place it in all corners of the room, the lime itself has the effect of moisture absorption, and can also slow down the indoor dampness.
Many areas of life in China have the characteristics of dampness, but a damp home will give people a very uncomfortable feeling, and at the same time, this swelling and dampness will also give the wardrobe a thousand disaster areas, which can easily lead to moldy and smelly clothes, so everything in the wardrobe can be moisture-proof and fragrant. >>>More
Ecological board, also known as "paint-free board" and "melamine board", is generally made of pine, poplar, fir, eucalyptus and other fast-growing wood, and the substrate in the middle is generally made of large core board and multi-layer board, and there are also particle boards, and a layer of paper imitating wood texture is pasted on the surface. >>>More
The kitchen is a damp and water-prone place, so all surface decoration materials should be made of materials with excellent waterproof and water resistance. The materials on the floor and the operating table should be water-free and water-seeping. The wall and ceiling materials should be water-resistant and can be scrubbed with water. >>>More
1. Drying of sports wood floors.
In the production process of solid wood sports wood flooring, a professional drying process must be carried out. This art is very important. When the sports wood floor leaves the factory, the moisture content of the sports wood floor should be balanced. How much exactly? It should be adapted to the climate and environment where the stadium is located. >>>More
After watering and moistening the base layer, remove floating sand and debris. Wipe the bonding layer, use a one-to-three dry cement mortar, pave it according to the horizontal line, put the bricks on the mortar and use a rubber hammer to vibrate, remove the ground bricks and pour the cement slurry, and then put the ground bricks on the ground to vibrate and flatten. >>>More