How can I remove and replace the screen of the balcony after it is broken?

First of all, prepare a screwdriver yourself, then unscrew the screws on the screen, and finally replace it.

The screen window of the balcony is broken, you can ask some professionals to repair it, this is actually very easy to solve, just change a new gauze on it, but if you really can't, it is best to ask a professional to do it.

It's very simple, take off the derailment and replace it, and pay attention to safety at the same time.

If you can't go up, it means that the track may be too long and full of dust or debris, and it is no longer enough to go up, so you can't take it out.

Hold the screen frame with both hands near the middle, and push it flat outward or inward, because the flexibility of the plastic is good, so it should be easy to take off. But this is best done by men, women have less strength, and the balance of force should not be as good as that of men, and if you don't get it right, it will rot the screen frame.

I really had no choice, so I had to find a door and window processing shop on the street to help you. But first you have to talk to them about getting the screen yourself, you don't need them to change anything, you just need to help you remove the screen, and then teach you how to put it on. The cost should not exceed 20 yuan.

Routine maintenance and upkeep.

1. After the installation of doors and windows, the protective film on the surface of the profile should be torn off in time and scrubbed clean; Otherwise, the adhesive of the protective film will remain on the profile in large quantities and will be difficult to clean.

2. In windy days, the casement windows should be closed in time.

3. No heavy objects can be hung on the handle of the casement window sash.

4. The casement upper hanging window is opened differently by changing the direction of the switch handle, and it is necessary to know how to operate it to avoid damage.

5. When the sliding window is in use, the sliding track should be cleaned frequently to keep it clean, so that there is no hard particle material on the surface of the track and in the groove.

6. Plastic steel doors and windows are equipped with drainage systems in window frames, window sashes and other parts to ensure the airtightness and watertightness of doors and windows.

Two people: Pull the middle into the bend and come out

Pull it up and pull it down.

Grab both sides of the window with both hands and remove it, so please try it.

Here's how to remove the screen:

1. There are two ways to fix the general aluminum alloy screen on the window track, one is like the one in the figure below, which is on the inside of the track frame.

2. There is another kind, which is the one in the figure below, which falls directly on the outer frame of the track, so when you want to remove the screen, first see which way the screen frame is placed on the track.

3. But no matter how the screen is placed on the window track, if you want to remove it, it is generally by raising the screen frame to expose enough space below.

4. If the screen frame is on the outer frame of the track, then the screen frame can be removed directly outward; If it is on the inside of the track frame, the lower frame of the screen window is obviously blocked by the window track frame.

5. At this time, try to move the screen frame into the window track first, so that it crosses the first track on the window frame.

6. Then lift the other end of the screen window frame and let it slowly move out to the outside of the window track, so that when the lower frame of the screen is completely removed, the lifted screen frame can be put down, and then the top of the screen window is oblique, and the screen can be removed.

In the summer, mosquitoes will appear, disturbing us at night, so every household will definitely install screen windows to prevent mosquitoes and ventilate. But some screens will not only have a lot of dust after a long time, but also it will always have some small damage to the corners and corners, at this time, in fact, we can replace the screen windows by ourselves, but it is relatively complicated to do it yourself, you can also find other masters to install, here for you to introduce a more comprehensive installation steps.

Method: Read step by step.

1. Remove the screen window first, and pry up the pressing strip of the old screen window with a word driver.

2. Pull out the whole strip of the old screen window.

3. Replacing the screen window is usually replaced together with the strip, and a pack of strips can replace many windows.

4. The special rope pressing car room for slotted drivers and roller tool screen windows is a good tool for easy replacement of screen window operations.

5. Align both sides of the new gauze with the inner edge of the window frame, and reserve enough beads to fix the part.

6. Press the whole strip into with a special rope pressure car for screen windows.

7. The corner is pressed into the fixed with a slotter, which is more convenient.

8. Fixed the section.

3. When the four sides are concerned, the gauze must be tightened on one side, and the pressing strip must be pressed in on the other hand, and finally the excess pressing strip should be cut.

9. Press the end into the fix with a slotted driver, and cut the excess gauze with a utility knife along the edge of the window frame.

Plastic steel screen window is generally slightly different from the track of aluminum alloy, as long as it does not affect the use, it is also possible to choose aluminum alloy screen window, plastic steel window is generally white, of course, there are imitation wood grain and other colors, you can refer to plastic steel matching when choosing aluminum alloy screen window.

Screen screen material selection screen material has nylon, iron, diamond mesh and other different materials, when choosing to see whether your window is in the kitchen or ordinary housing or other places, when choosing to pay attention to durability, rust prevention, good air permeability and other materials.

Aluminum alloy window profile Aluminum alloy window profile is divided into multiple types, specifically the installation of aluminum alloy screen window needs to measure the data of plastic steel screen track and groove width, and then find a suitable aluminum alloy profile, in addition, the color of aluminum alloy windows and the color of plastic steel doors and windows may be somewhat different, if the landlord does not care about this color, it is also possible to choose aluminum alloy, as long as it is still matched with plastic steel doors and windows.

It is relatively simple to change the screen, first of all, we must find someone to customize a screen of the same specification according to the size of the original screen, and then remove the broken screen on the original window, install a new one, and you can lift it up when you take the old screen.

You can go to the Internet to buy that kind of screen screen, if it is a small piece of broken, you can cut a small piece of the new screen screen to sew on; If the whole surface is broken, you can directly buy the kind of sticky screen and stick it directly to the previous screen, which is also very simple, and it is sold on **.

The steps to change the screen: you can first find a handful, warp the bead in the old screen frame, and pull the strip up, then the whole screen will fall off. Prepare a tool roller tool to install the bead into the screen, align the two sides of the newly purchased screen with the inner frame of the screen frame, cut it, and keep the part of the bead that needs to be fixed.

Prepare the bead and place the bead along the recess of the inner frame of the screen and above the screen. Then use the roller tool to press the bead in. Some corners can be pressed in with the help of a single word.

What should I do if the screen window at home is broken? Change it yourself: Six steps to teach you to change the screen window, which is convenient and saves money.

The current screens are easy to disassemble, and it is good to replace the screen frame.

When we are at home, sometimes we will accidentally break the window screen, some bear children are very naughty and easy to accidentally break the window screen, and they may accidentally break the window screen when they live alone or rent a house, so how do we accidentally break the window screen? Let's teach you how:

First method:If your window screen frame is a plastic frame, then we should lift it up when changing the window screen, and then bend the two sides of the window screen frame inward or outward to form an arc, because the plastic frame can be deformed or bent, it is more convenient to operate, bending into an arc can reduce the relative height of the window screen frame, it will be very convenient and easy when we take out the window screen frame, take off the rotten window screen, and then replace the new window screen, we first buckle the upper edge of the window screen, Then make the curvature on both sides of the window screen frame slightly larger, and then buckle the lower edge of the window screen, and finally replace the window screen in the same way.

The second method:Pry up the rotten window screen with a slotdriver, then pull up all the strips, measure the size of the window screen frame, cut off the prepared PVC excess part and insert it into the triangle to make a frame, and then align the new window screen to be replaced with the inner edge of the window frame and reserve enough beads to fix the part, then spread the new window screen on the completed frame, and then press the window screen into the PVC strip with a grooved magnetic strip, absorb the adhesive magnetic strip on the card slot, and install the second clip at 30% from the top of the frame. Pull open the protective film and put it into the clip, then tear off the fixed position, and then press it into the whole screen with the screen, and tighten the screen when fixing the edge, and then cut off the excess pressure strip.

If the screen window in your home is broken, it needs to be replaced. How do you replace the window screen? PChouse will take you to find out.

1. First of all, the old screen window must be removed first, and the pressing strip can be pried up with a word for the fixed place.

2. After that, you need to pull up the entire strip of the old screen window.

3. Generally speaking, when changing the window screen, the strip will be replaced together, a pack of strips is enough for multiple windows, if you are afraid that the strip is not enough, you can prepare an extra pack.

4. Prepare a word and roller tools, etc., which can facilitate the replacement of the screen.

5. Align both sides of the new gauze with the inner edge of the window frame, and reserve enough beads to fix the part.

6. After that, you can use the special rope pressure car for the screen window to press the entire pressing strip into the relevant position.

7. For the corner place, it needs to be fixed after pressing it in, which will be more convenient and labor-saving.

8. When it is almost fixed, the overall gauze should be tightened, and then the pressing strip will be pressed into one side, and the excess pressing strip will be cut off.

9. After that, you can press and fix the end of it with a word, and then cut off the excess gauze with a utility knife along the corner of the window frame.