What should I do to renovate my new home? How to choose a waterproofing material?

Specific methods of waterproofing house decoration: 1. Clarify the waterproof area, and the ground and wall of the kitchen, bathroom, and balcony should be waterproof; 2. Choose waterproof materials, use waterproof paint, and brush waterproof paint on the parts that need to be waterproof; 3. Brush the waterproof paint in the bathroom 2-3 times, and the height of the waterproof layer on the floor and wall of the kitchen balcony shall not be less than one meter; 4. After the waterproof construction is completed, do a good job of closed water test, generally 48 hours observation time.

1. Clearly do waterproof area, most families have high requirements for the waterproof area of the house in the decoration, mainly used for the waterproof part. Common areas that need to be waterproofed are kitchens, bathrooms, balcony floors and walls.

2. Choose waterproof materials, walls and floors for waterproofing, you can choose waterproof coatings, waterproof paints, most of them will use polyurethane waterproof coatings, polymer cement slurry waterproof slurry. These materials are very common household waterproof materials, which are not expensive, and the construction is very convenient, and they also need to be used with sealant.

3. In accordance with the standard construction, under normal circumstances, the construction specifications of the waterproof layer in each area have strict requirements, no corners can be cut, the thickness of the waterproof layer, the quality of amateur waterproofing is linked, the waterproofing of the bathroom generally needs to be brushed 2-3 layers, the height is not less than one meter eight, or the entire bathroom wall can be brushed with waterproof coating. The height of the waterproof layer on the floor and wall of the kitchen balcony shall not be less than one meter.

4. Do a closed water experiment, after the completion of the waterproof project, you need to do a closed water experiment, you can put about three centimeters of water in the waterproof area, you need to block the threshold, the drain, and then let the water stay for about 24 hours, at least 48 hours in winter, to observe whether the water level has dropped or whether the ground of the neighbor's house has returned to moisture, and it is also necessary to check whether there is leakage, if the test is qualified, you can further conceal the construction.

Precautions for waterproofing house decoration.

1. The original waterproof layer can not be destroyed in the bathroom or kitchen during the construction process, and if there is damage, it needs to be remedied in time to prevent water seepage.

2. The waterproof layer of the bathroom is most easily damaged at the joint of the pipeline during the construction process, and in the construction, we must pay attention to the waterproof coating in place, and at the same time protect the finished product. The upper and lower water pipes of the kitchen and bathroom should be covered with cement roots, brushed from the ground to the water pipe 10-20 cm, and then polyurethane waterproofing, plus the waterproof layer to form a composite waterproof layer, so that there will be no leakage.

3. The waterproof layer of each area needs to be treated at the base layer before construction, and the base layer must be kept flat and clean to prevent the uneven construction of the waterproof layer and the uneven thickness of the waterproof coating causing leakage.

The waterproofing of the house in the decoration can be carried out from the above aspects, and at the same time, in the construction process, it is also necessary to pay attention to the precautions, so as to do a good job of waterproofing.

In the process of decoration of the new house, waterproofing is very important, you should choose the right waterproof material, and do double-layer waterproofing, so that it can be convenient for future use.

It is necessary to waterproof the bathroom, kitchen and balcony, level the ground, clean the ground, and then apply waterproof paint, conduct a closed water test, and try to choose reliable and quality-assured waterproof materials.

First coated with waterproof coating, and then paved with a layer of waterproof membrane, double guarantee, there will be no leakage, waterproof material selection asphalt polyurethane waterproof membrane can be, waterproof effect is good, cheap.

House decoration, do a good job of waterproofing methods: when the restaurant kitchen and bathroom are decorated, if the original walls and floor tiles are removed and renovated, regardless of whether the walls and ground are known as baffle bricks before being pasted again, the ground waterproofing of the surrounding armpits should be 200mm high, and the ground waterproofing with a part of the bathtub should exceed the top of the bathtub 200mm above. When there is a shower and there is no other moisture protection measure, the floor waterproofing should be able to spray any part of the shower.

Waterproof treatment for restaurant kitchen and toilet decoration: If the ground has not been waterproofed before, the ground waterproof should be added in the above way; If the ground waterproofing has already been paved, the ground waterproofing should be carefully considered whether it is timely and whether it is damaged, otherwise it should be repaired. After maintenance, the water injection test is carried out, and the qualification standard is that there is no mess, leakage and no moisture on the walls under the floor and around the building.

The main entrance in the middle of the hallway of the shower room and the restroom. Before the marble threshold is assembled, it must be mixed with cement first, and then stored after it is leveled and dry, so that it can reasonably block and protect the water flow of the toilet and restaurant kitchen, and reasonably achieve the actual effect of waterproof and leakage-proof. Before the waterproofing of the toilet is solved, it is necessary to level the road surface with cement mortar first to prevent water leakage caused by uneven thickness of the waterproof material.

In addition to this, the road surface should be cleaned before it is protected from moisture. After the road surface is dry, polyurethane paint architectural paint should be applied 2-3 times, followed by porcelain tiles or floor tiles.

The method of choosing waterproof materials: you need to look at the well-known brands and a variety of quality and certification standard oak history, look at the application field of the product manual, and combine the indoor environment of interior decoration with the need to choose equipment that matches the model and specifications. At this stage, all the products of Meisu are based on the world's four major harsh environmental protection product certification of the highest level of specifications, and when choosing, we must seek more suggestions from professional and technical personnel in the store or read the instructions in the packaging design of the article, such as the new house should try to choose a softer waterproof material, the old house can choose a stiff waterproof coating, the road surface generally chooses a soft level, and the wall can choose a stiffness level.

How to do: 1. Leak-proof. It is necessary to do a good job in windows, balconies and other places in the waterproof and leak-proof technology.

2. Anti-leakage. This problem mainly occurs in the bathroom or kitchen. At this time, to prevent water leakage upstairs, brush a layer of waterproof material on the top of the house, be sure to check whether there is a waterproof layer, and do a good job of waterproof layer in the later stage can also avoid problems.

How to choose: Two-component waterproof coating can be used for roofing waterproofing materials, and its waterproof effect is very good.

You need to apply waterproof materials, choose according to your own needs, try to choose better quality, and use for a long time.

It is necessary to choose some professional companies to carry out waterproof operations, so that you can participate in our waterproofing work. It can be selected according to the waterproof performance of the waterproof material.

How to choose waterproof materials for home decoration and what are the precautions?

Different waterproof parts need to choose different waterproof materials.

1. Kitchen and bathroom.

The kitchen and bathrooms are waterproof indoors. The indoor temperature difference does not change much, and it is less affected by the climate, so the elongation requirements for waterproofing materials are also small. It is worth noting that the walls that need to be tiled need to be waterproof, and rigid waterproofing materials need to be used.

At the same time, the waterproofing layer can have a good affinity with the tile adhesive. It is recommended to use SKAR JS waterproof paint and K11 waterproof paint.

2. Roof, roof and exterior wall.

Roofs, roofs and facades are waterproofing components that are highly affected by the climate. The reason is that they are exposed to nature for a long time and are subjected to wind and rain. Therefore, in terms of material selection, it is necessary to choose waterproof materials with high tensile strength, high elongation, good weather resistance and aging resistance.

It is recommended to use SIEGEL highly elastic rubber bitumen waterproofing coating (liquid membrane).

3. Balcony. The balcony is the waterproof part between the kitchen sanitary napkin and the outdoor roof and exterior walls, which is often exposed to wind and sun, but not as severe as the outdoor open air. Therefore, when choosing a waterproofing material, we need to consider the elongation and water resistance of the waterproofing material.

Here, we recommend that you use Sgel K11 universal waterproofing paste and JS waterproofing coating.

Home decoration waterproof precautions.

In order to achieve a good waterproof effect, the quality of the waterproof material must be guaranteed. At the same time, we can't afford to cut corners in waterproofing construction. The thickness of the waterproofing layer must be thick enough, otherwise it is easy to seep water.

During the waterproofing construction of the bathroom, the ground base must be leveled. At the same time, the waterproofing construction of the toilet must be carried out only after various pipes are buried. When carrying out waterproof construction, it must be careful and meticulous.

The waterproofing construction of the connection between the wall and the ground should not be ignored. After the wall is moisture-proof, it is best to carry out waterproofing construction on the ground.

In order to achieve a good waterproof effect, the quality of the waterproof material must be guaranteed. At the same time, we can't afford to cut corners in waterproofing construction. The thickness of the waterproofing layer must be thick enough, otherwise it is easy to seep water.

During the waterproofing construction of the bathroom, the ground base must be leveled. At the same time, the waterproofing construction of the toilet must be carried out after the various pipes are buried. Be careful when carrying out waterproofing construction.

The waterproofing construction of the connection between the wall and the ground should not be ignored. After the wall is moisture-proof, it is best to carry out waterproofing construction on the ground.

1. Choose brand products with high visibility, good reputation, high degree of anti-counterfeiting, and international quality system certification when purchasing.

Second, the waterproof part should be comprehensive, and the ground and all walls of the basement should be waterproof and moisture-proof.

Third, the thickness of the waterproof layer should be sufficient.

Fourth, the construction process should be meticulous: the joints between the wall and the ground, the yin and yang corners, the perimeter of the water pipe, floor drain and sanitary ware, and the trench where the hot and cold pipes are laid are the key waterproof parts.

Waterproofing materials for home decoration are available in a variety of options such as flexible mortar, rigid mortar, polyurethane, and acrylic according to their own properties and different occasions of use. When choosing, we should not only pay attention to whether it is formal and whether the quality is excellent, but also pay special attention to its use occasions and whether it meets your own needs. For example, on the frontal and backwater surfaces, the waterproofing materials are not the same.

If you're looking for speed and simplicity, then acrylics are the right choice because they can be used right out of the box. If you can't make up your mind, or if the situation of use is special, you can consider polyurethane products, because they can meet the needs of a variety of indoor and outdoor scenarios.

How to choose waterproof materials for home decoration and what are the precautions? After the waterproofing is done, once the inferior waterproof coating is used, it will pollute the indoor environment for a long time, and it is difficult to replace it, so it is necessary to pay attention to its environmental protection when choosing the waterproof coating. Calculate the total amount required and make a reasonable loss, which can get a reasonable amount.

Home decoration waterproofing is a more important step, do a good decoration waterproofing can bring help to your life, and also avoid unnecessary troubles in the later stage, there are a lot of waterproof material brands in the home improvement waterproof market, people don't know how to choose, then, how to choose home improvement waterproof materials? Next, let's find out together!

Consumers with conditions should choose relatively good brands when purchasing. The real environmentally friendly waterproof materials should have the test report, product test report and product certificate issued by the nationally recognized testing center, and the service measures of the manufacturer should be paid attention to when buying waterproof coatings, as well as after-sales protection.

Which is better for home improvement waterproofing.

1. Flexible mortar: According to experts from Qeeka Home, this flexible waterproof mortar is mostly used for frontal parts such as walls and grounds, and cannot be used for backwater parts such as the top surface.

2. Hard mortar: also called rigid mortar. After this kind of brushing, there is no need to treat the coating, and it can be directly tiled, which is more convenient. The hard mortar is the waterproofing effect of the back water surface is very good. Therefore, it is generally used for waterproofing the backwater.

3. Polyurethane: It can be used both indoors and outdoors. It can be said that the waterproof effect of this material is very good.

However, the smell of this waterproof coating is larger, and it is difficult for ordinary people to stand it. Another disadvantage is that polyurethane is gelatinous and very thick, and it is necessary to use scraping to make a board during construction, which is very laborious and complicated.

4. Traditional waterproof construction method: add an appropriate amount of silica gel waterproofing agent to the cement mortar, and make a layer of about 20 thick cement mortar waterproof layer on the ground, the waterproof effect is not good, and the home decoration has been basically eliminated.

Conclusion: The above content is about how to choose waterproof materials for home decoration? I hope it can help you. I believe that after the content introduction, which one will you have for home improvement waterproofing? If you have more understanding, if you have a need in the future, you can refer to the content.