How can clay become styrofoam, and how can clay become styrofoam

Updated on home 2024-07-03
5 answers
  1. Anonymous users2024-02-12

    10 Affordable Internet Celebrity Foundation Reviews! No beauty and no filter, tell you which one is worth buying!

  2. Anonymous users2024-02-11

    Anonymous user level 1.

    There are many ways to make styrofoam, such as using clay, glue or white glue can be simple to make styrofoam, the following is an introduction to the method of using clay to make styrofoam:

    1.First, add a clay to the container, then add water to melt.

    Sogou asked. 2.Wait until it melts, then add the coloring that you like.

    Sogou asked. 3.Add hand sanitizer and stir it well.

    Sogou asked. 4.Then add it and continue to foam and stir into a hundred shapes, if not enough to add again.

    Sogou asked. 5.Then stir all the way and stir and stir for a while.

    Sogou asked. 6.After stirring and molding, you can get started, so that the styrofoam is successful.

    Sogou asked. Notes:

    1.Be careful not to let the glue get on your hands during the process;

    2.Be careful not to eat.

    3.Liquid glue + shower gel + shampoo + glycerin + molding water or liquid glue + facial cleanser + foaming hand sanitizer stock solution + glycerin + molding water, the styrofoam effect made by this method is also very good.

    4.When making styrofoam, the ratio of water to glue should be kept at about 1:2 for the first time, and then we add the material with foaming effect and stir.

    After roughly finishing, borax can be added for the final solidification treatment, at which point if the styrofoam is hard, additional water can be added.

  3. Anonymous users2024-02-10

    Preparation materials tools: clay, hand sanitizer, water, coloring.

    Steps. First, add a piece of clay to the container, then add water to melt. See image below

    Steps. 2. Wait for it to melt, and then add the pigment that you like the color. See image below

    Steps. 3. Add hand sanitizer and stir well. See image below

    Steps. Fourth, then add to continue the foam and stir into the type, if not enough to add again. See image below

    Steps. 5. Then stir and stir all the time, it will take a while. See image below

    Steps. Sixth, after stirring and molding, you can get started, so that the styrofoam.

    And you did. See image below

  4. Anonymous users2024-02-09

    How to turn clay into blistering:1. Add a clay to the container, add water and melt.

    2. After melting, add the pigment of your favorite color.

    3. Add the usual hand sanitizer and mix evenly.

    4. Add foam, continue to stir and form, if it is not enough, add the group again.

    5. Stir all the time, it will take a while.

    6. After stirring and molding, you can get started, so that the styrofoam will be successful.

    How to wash off foaming glue sticking to clothes :1. The foaming adhesive clothes can be removed with gasoline, kerosene, alcohol, or the daily use of flower dew water wind oil essence and the like. The substance used to remove styrofoam from clothing has a unified sock branch name called solvent, and the chemicals in this solvent can be diluted by the chemicals in styrofoam.

    2. The specific way to remove the styrofoam glue stuck to the clothes is to first stick the clothes to the place where the styrofoam is flattened, and then apply any of the substances mentioned above, such as alcohol and toilet water, to the styrofoam, and soak the styrofoam with solvent, so that the styrofoam on the clothes will be completely diluted when the solvent is not dry, and wash the styrofoam with transparent soap or laundry detergent when the solvent is not dry.

    3. Alcohol can also be clear about styrofoam, but the speed will be relatively slow, you should first pour alcohol on the clothes with styrofoam, and wait for a few minutes to scrub and wash, you can wash off the styrofoam on the clothes. After that, rinse the clothes with clean water and let them dry.

  5. Anonymous users2024-02-08

    The method of turning clay into styrofoam is as follows:Tools: clay, container, water, hand sanitizer, stirring bar, coloring.

    1. Add a clay to the container, add water and melt.

    2. After melting, add the pigment of your favorite color.

    3. Add the usual hand sanitizer and stir well.

    4. Add the foam, continue to stir and shape, if it is not enough, add again.

    5. Stir all the time, it will take a while.

    6. After stirring and molding, you can get started, so that the styrofoam will be successful.

Related questions
14 answers2024-07-03

The Elder Scrolls Five Furnace Fire Decoration Materials**, I'll check all the nets first, and then tell you.

27 answers2024-07-03

Care: Yunnan Baiyao has the effect of helping to alleviate gum problems (bleeding gums, swollen and painful gums) and repair mucosal damage. Health care: >>>More

10 answers2024-07-03

The formation of foot bubbles is due to the sweat of the soles of the feet, the softening of the epidermis, and the prolonged force and friction of the soles of the feet, which promote the exudation of local tissue fluid. It is often related to factors such as shoes and socks, uneven walking roads and uneven speeds, and lack of exercise among tourists. However, attention to maintenance can still avoid or alleviate discomfort: shoes and socks should be appropriate, shoes should not be too high or too small, it is best to wear semi-new rubber shoes or cloth shoes; Ladies should not wear high-heeled leather shoes; The insole should be flat, the socks should be free of damage and wrinkles, and the shoes and socks should be kept dry; Once sand particles are in the shoes, they should be removed in time; Hiking should be gradual, the pace should be even, the landing should be steady, not fast and slow; When resting or before going to bed, try to scald your feet with hot water to promote local tissue fluid circulation; Massage the soles of the feet with your hands or apply kerosene to the protruding parts of the soles of the feet; In addition, drug prophylaxis can also be used. >>>More

9 answers2024-07-03

Sparkling wine is relatively calm wine, China's national standard GB 15037-2006 according to the different carbon dioxide content of the wine is divided into calm wine and sparkling wine, high-quality sparkling wine elegant aroma (and with yeast aroma), delicate foam, moderate killing, refreshing and harmonious. >>>More

7 answers2024-07-03

I wish you good health The dawn of the morning dawns and happiness falls on your side; At noon, the sun is shining, and the smile is in your heart; In the evening, the sun sets, and the joy accompanies you for a day. If you can, don't get bored with my blessings; If possible, let me share your joys and sorrows; Please let me get yours if I want. In daily life, many people will encounter the situation that the corners of the mouth are rotten and there are small blisters on the side of the mouth, which is cold sores. >>>More