Hat crochet? Crochet hat tutorial

Thread: coarse wool (cotton, wool, etc.), crochet (you can also adjust the thread and crochet model according to the rules).

Row 1: 27 pins from the locking needle, starting from the 3rd needle, without adding or subtracting a row of medium and long needles (25 needles, 2 locking needles do not count as 1 needle).

Row 2: 2 locks, turn over, we pick the second half of the needle without adding or subtracting the hook in a row of medium and long needles.

Lines 3-23: Same as the hook method in line 2 (each line is hooked with the second half of the needle).

Then, we fold the weaving piece in half, one for one needle, pick each half needle (on the inside, the two half needles are next to each other) hook and pull the needle to suture, break the thread, and leave the thread to close the top of the hat.

Cap top: Crochet needle into the horizontal braid needle below, hook the thread out, then thread the next horizontal braid needle in turn, hook the thread out, and so on, hook a full circle. Then we tighten the thread and the crown is formed.

Finally, add pom-poms to the top of the hat (buy a ready-made one or hook it yourself, it is recommended to wear a larger fur pom-pom ball will look better).

Hat Crochet 1 First, we start with a small circle, and then hook 12 long needles to form a circle. 2 In the second circle, one stitch is added to each stitch, which becomes 24 stitches, and then one stitch per stitch, hooked to a suitable width (6-7 circles), and the top of the cap is wide. 3 Then start to hook the flower, that is, the depth of the cap 4 I use this flower 5 Don't hook a circle, leave some space 6 Hook back and forth to the depth of the hat 7

As follows:

Tools Raw materials: wool, crochet needle.

2. Then, the second circle: add the needle of the short needle, hook 2 short needles in each braid needle, the number of needles is 12 needles, and then connect with the first needle to pull the needle to complete this circle.

3. Then, the third circle: the addition of the needle of the simple or short needle, the number of needles is 18 needles, and the first needle is connected to the pin to complete the third circle.

4. Subsequently, the 4th-8th lap: crochet 18 short needles without adding or subtracting.

5. Immediately after, the 9th circle: this circle is the crochet of long needles, crochet 2 long needles in each braid needle, the number of needles is 36 needles, and the first needle is connected to the extraction needle to complete the 9th circle.

6. Brother Sou's last, the 10th circle: pull 3 braided needles and crochet a short needle every other needle, so that the hat is hooked with a circle of lace. Then hide the end of the thread and you're good to go.

Prepare the yarn and crochet needle and start the needle. Put the yarn on the fingers is around 2 circles, then hook 3 braid needles.

Then 14 long needles are hooked out of the coil. Complete the first lap, then come out with 3 braid stitches.

In the second circle, 2 long needles are hooked in each braid. The head and tail are connected, the needle is pulled out, and then 3 braid needles are hooked.

In the third circle, repeat the hook method of the second circle to hook the third circle.

In the fourth circle, 3 braid needles start, and then hook a long needle in the hole of the braid needle, so that there are 2 long needles; Then proceed to hook one long needle in the front braid and then 2 long needles in the front braid. Repeat this for the fourth lap. <>

In the fifth circle, after picking up 3 braid needles, hook a long needle in each braid to complete the loop.

In the sixth circle, hook 3 braid needles, hook 3 long needles in 2 braids, and then hook 2 braid needles; Separate 2 braids, hook 3 long needles in the 3rd braid needle, and repeat the operation to complete the hook.

After the seventh lap, repeat the sixth loop flying crochet method. Hook all the way to the main length.

The full tutorial of crochet hat is as follows:

Tools: crochet, cotton thread.

1. We prepare crochet and cotton threads, and first crochet out 60 braid needles for crochet demonstration.

After the braid needles are hooked, the head and tail are connected, and the extraction needles are ended, and then 3 braid needles are hooked out to start the crochet of the cap body.

After the braid needle is hooked, a long needle is hooked out in each braid, the hook is completed, and then the head and tail are connected, and the hook is finished with a pull needle to complete the first circle of crochet; Next, continue to crochet 3 braid needles to start the second loop of crochet, the second loop of crochet is the same as the first loop.

4. After the second circle of hooking is completed, the head and tail are connected, the needle is ended, and then the third and fourth circles of crochet are continued.

5. Hook to the hat to roll half of the needle began to collect the needle, hook out the second long needle when the needle is retracted, do not withdraw and continue to hook the third long needle and pull it out together, so that you can close a needle, each 4 needles will receive a needle, repeat the crochet 2 circles.

6. Then crochet 3 stitches and then close a stitch, hook it to the top of the hat into a small circle, and then use the thread to thread it through the gap in the top of the hat, and then tighten it from the back of the hat. Summoning macros.

7. Tie the tightened thread, and then turn it over to tidy it up, so that the crochet hat is complete.

Knitting process characteristics

According to different process characteristics, knitting production is divided into two categories of weft knitting and warp knitting, in the weft knitting production of raw materials can be directly produced on the machine after the yarn is wound, each yarn is placed on the knitting needle of the weft knitting machine along the weft direction in order, in order to form the weft knitted fabric, in the warp knitting chain surplus production of raw materials through winding, warping, yarn parallel arrangement winding into the warp beam, and then on the machine production.

The yarn is unwound from the warp beam, and each yarn is placed on one or at most two knitting needles of the warp knitting machine along the longitudinal direction to form a warp knitting fabric, and there is also a method of combining weft knitting and warp knitting on some knitting machines, at this time, two groups of yarns are configured on the knitting machine, one group is cushioned according to the warp knitting method, and the other group is cushioned by the weft knitting method, and the knitting needle forms a loop together with the two groups of yarns to form a knitted fabric.

The hook method of the long needle of the hook hat is as follows:

1. Wrap the thread first, fix it with your thumb after wrapping it, and then carry out the circular needle lifting.

2. Then hook a braid as a standing pin. Make a marker buckle on the first stitch, and continue to hook five medium and long stitches.

3. Tighten the thread, remove the marker buckle, and the first medium and long needle will lead the wave.

4. Then hook the second circle, the second circle is also the first to get up a standing needle, and hook two medium and long needles in each needle.

5. Make a marking buckle on the first needle, and each of the back needles is to hook two medium and long needles, this circle has a total of 12 medium and long needles, and the marking buckle is taken off, and the first medium and long needle is induced.

6. Then hook the third circle, hook a short needle out, hook a short needle on the left side of the short needle, and the two short needles overlap together to make a standing needle of a long needle.

7. Hook a long needle in the first needle, and the two needles together are a long needle.

8. Make a marking buckle on the first needle, and also hook two long needles in the next needle to form a long needle plus needle, and this circle hooks a total of 12 long needles and needles.

9. The fourth circle is a long needle plus a long needle, and the fifth circle is two long needles plus a long needle plus a needle, so as to increase the long needle, and the hat is hooked.

Hats play a lot in our lives!Cold, wind, cold;Sunscreen, dustproof, radiation-proof!In this coldest winter, as virtuous as you, hurry up and hook a warm hat for yourself and your family.

One of the advantages of hooking a hat is that it is a small job, a small amount of work, and it can be hooked quickly, and it can be changed often.

Try a 50 cm head circumference baby, everyone's hand strength is different, according to the ** self-addition and subtraction of needles!

Hat: R1: 12F

R2: Code (fv) 12

r3: (f,fv) 12

r4: (2f,fv) 12

r5: (3f,fv) 12

r6: (4f,fv) 12

R7: (5F,FV)12 (Add or subtract needles according to head circumference)R8-R15: (One needle 3F, two empty needles, one late hunger Ming needle, two medium and long needles, jujube needles, two empty needles, one needle 3F....)Repeat to the end.

R16: A short circle of needles.

R17: A circle of long needles plus needles.

R18: A circle of limb stitches.

R19: Change the wire and pull it out once.

Ribbon: 1Start 30ch inverted 2 hook v, 27x, w, 28x2:

x,v,x,t,8f,t,x,3si,x,t,8f,t,x,v,x,v,x,x,t,8f,t,x,3si,x,t,8f,t,x,leave the thread to stitch the two ends together, and fix it in the middle in a few circles after stitching.