How to roll up a long sleeved shirt, how to roll up shirt sleeves How to roll up shirt sleeves to lo

There are three main methods.

Method 1: Natural Volume.

Natural roll is the easiest way to roll, fold from the inside out, generally the cuffs are just covered by the shirt cloth, and the sleeves can be rolled below the elbow. Remember to adjust the height of the armroll according to the length of your arm.

Method 2: Sailor roll. The height of the sailor roll is above the elbow, in the early days, it was for the convenience of sailors at sea, it needed to be rolled repeatedly, suitable for soft and thin shirts, and the sailor roll was more picky to the upper body, and it was recommended that men with good shoulder or arm lines try this curling method.

Method 3: Italian rolls. Italian rolls emphasize the form of cuffs exposed to the outside, not divided by length, and are suitable for shirts with stiff and thick materials.

Overlap and flip upwards according to the width of the shirt sleeves, generally 6-8cm

If it is a more formal occasion, you can choose the first one, which will be more energetic. The important point of note is that the part of the remaining sleeve is one-third of the entire sleeve.

If you want to be more comfortable, you can adjust the height of the volume so that the height of the volume is best between 1 and 2 below. In general, choose the second type, do things without getting in the way, and be relatively neat. "I wear it on an informal occasion casually, life. I want to be more capable and easy to move".

The completely casual curling method is the third type.

Overlap and flip upwards at a length of about 8 cm.

Roll a few more lanes, each one narrowed a little, so that you can roll a few more times, and it doesn't look so open-minded.

Find someone to help you roll up.

There are several listeners on the burner circuit.

1. Casual roll method: specific steps: unbutton the shirt cuffs, roll up layer by layer, and the width of the sleeves should not be too wide or too narrow. Take care to keep the rolled-up shirt fabric flat.

2. Classic roll method: specific steps: unbutton the cuffs of the shirt, fold the sleeves up repeatedly according to the width of the cuffs, and roll them up to a position that is about a little higher than the elbow.

3. Roll method: specific steps: unbutton the sleeves, roll the cuffs up, and make the fold higher than the elbow, and then slowly roll up the sleeves from the hem, and finally expose the edge of the cuff a little.

Many men have the habit of wearing shirts, and they always like to roll up their sleeves when wearing long-sleeved shirts. The act of rolling up sleeves has been popular for more than half a century. In the past two years, the fashion that was once all the rage, Elvis Presley and the "godfather" Marlon Brando, who likes to roll up their sleeves, is back.

Today, I will share with you how to roll up the sleeves of men's shirts to look good.

1. Workplace.

Button up the cufflinks of your shirt; Roll it up from the edge outward, roll it up and flatten it at the same time, you can use an electric iron; Repeat several times, folding flat upwards until you reach a position above your elbow; Put it on again when you're done. In various workplaces, choosing this kind of volume method gives people a sense of ability and conciseness, and it seems that you can feel at ease that everything is handed over to you.

2. Casual occasions.

Unbutton the two buttons at the very edge of the cuffs; Pull the entire cuff high up to about elbow level; Roll up from the lowest part of the elbow to reveal the edge of the cufflinks about 1 3. This method of rolling the cuffs is suitable for almost all shirts. At the same time, it also looks more natural, comfortable and stylish, highly recommended.

3. Any occasion.

Untie all the cuffs; Fold the bottom edge of the cuffs up; According to the same roll width, continue to fold and roll up; Repeat several times until the right length. This way of rolling cuffs is very simple and easy to learn, and many friends are born with it. Rolled sleeves look casual, capable, thin, and tall, which is simply the only magic weapon to enhance men's image!

The sleeve rolling, hurry up and learn it quickly!

Well, today's shirt sleeve roll method is introduced here, I think everyone has their own favorite roll method, hurry up and put on a refreshing shirt and try the most suitable way to roll for yourself.

The sleeves of the shirt are rolled as follows:

1.Traditional Sleeve Roll Method:

Roll the sleeves up 2-3 times at the same width. This method is suitable for thicker shirts, such as denim or flannel. The main points are: smooth (don't roll it up), equal width, 2-3 rolls.

2.Create your own sleeve roll-up method.

Unbutton the cuffs completely, then roll them up to the elbows, then roll them up again from the end to the elbows, and then tuck the unrolled parts that are exposed into the "roll" and hide them.

3.The curling method of the double sleeves.

Pull the T-shirt with the palm of your hand and do a traditional roll over the shirt, then slightly roll up or roll up the T-shirt so that the cuffs of the T-shirt are exposed outside the cuffs of the shirt.

4.One-step volume.

Pull the sleeves of the sweater up slightly to expose the cuffs of the shirt, then fold the cuffs up and roll them up once to wrap around the cuffs of the sweater.

How do you roll up shirt sleeves to look good? 2 sleeve roll methods, hurry up and try it.

Natural roll, roll casually, don't roll in the middle of the gauge, that looks even more unnatural!

How to roll up the sleeves of a long-sleeved shirt to look good.

We often see actors rolling up their shirt sleeves in TV shows and movies, and we think it's very beautiful. So people will ask: how to roll up the sleeves of a long-sleeved shirt to look good?

Method 1: Don't be too deliberate and don't be too sloppy. You can fold the cuffs first, and then roll them up layer by layer; The length is below the elbow. The length of the three-quarter sleeve is more visually appealing.

Method 2: Method 3:

In fact, it doesn't have to be folded up, it can be pulled up. It's more casual and looks comfortable. However, if it is slim, because it is close but not tight, it is easy to get.

Specifically, when the shirt is put on, the sleeves are straightened, and the other sleeve is wiped with one hand and it goes up. Feel free to cut it casually, the visual effect is still good.

Just don't be too deliberate and don't be too sloppy. You can fold the cuffs first, and then roll them up layer by layer; You can also turn the first fold upwards to make it longer, and then roll it up layer by layer depending on the width of the fold that is ultimately needed. You can refer to the two shirts.

How to roll up the sleeves of the shirt:

1、aifa roll

It follows the rule of thirds – a design principle that also has an influence on masculine style. In the AIFA volume, the sleeve only exposes one-third of the weight of your arm. According to the rule of thirds, this ratio is visually appealing.

2. The Basic Roll.

This method is also known as "novice rolling", and it is an intuitive way to roll up your sleeves. If a person has never thought about how to roll up their sleeves, they probably use this kind of thing"Minimalist volume".Depending on the size of the shirt and the degree of fit,"Minimalist volume"Can be time-consuming.

It restricts the movement of your hand and is difficult to unravel.

3. The High Roller This kind of "high roller roll" is a good way. This method is suitable for men with large biceps and arm tattoos. The sleeves are rolled higher than the elbows.

It's also great for heavy work that requires a lot of hands-on work and can make you look laid-back. And to achieve this sleeve roll effect, you'd better fold the sleeves before putting them in.

1. Line the long sleeves first.

Unbutton the shirt and fold the cuffs to the elbow joints in one go, then straighten the two layers of cloth that are rolled up, and then fold the fabric under the elbow section up to the appropriate position above and below the elbows, and finally use the cuffs, arms and rolled up parts of the fabric to make a distinct layer.

This kind of roll method is suitable for wearing a more formal shirt, when going to work or participating in more formal occasions, in addition to being more convenient to do things, it can also show a different fashion attitude from others in a more standard atmosphere.

2. Unbutton the long-sleeved shirt first, then fold the cuffs back for a short while, then use the second section of the rolled up, and then fold it three times in a row, and finally complete the shape in the appropriate position above and below the elbows, and completely collect the excess part into the folded sleeves.

Although it seems that the sleeves are folded up in a regular way, this is also due to the fact that the fabric of a casual shirt is usually thinner or lighter, so it needs to be fixed with a relatively complete finish to achieve the styling effect, but if it is loosened, it will have another effect.

The classical volume method applies to each bai

This is the most basic shirt zhi roll method, concise, dao

Capable and suitable for all kinds of work occasions.

Specific steps:Unbutton the two buttons on the cuffs of the shirt and fold the sleeves up and down repeatedly at the width of the cuffs. Usually, if you sit in the office, you can roll it up to the back of your forearm, which is about 7 minutes of sleeve.

If it is rolled up to the elbow position, it looks fashionable and gentle, and with a meticulous vest, tie, and glasses, it is very suitable for the sullen little Zhengtai.

Of course, you can also roll it up a little higher, directly to the middle of the upper arm, which is about the length of the short sleeve. This height is a favorite of American GIs, showing off the forearms and biceps muscles full of blood vessels, and it is even better to have tattoos or something.

The casual roll method is more casual and domineering

In fact, we use this roll method a lot, such as washing ...... face or dishThe sleeves are not actually rolled up, but "rolled" up.

Specific steps:Unbutton the cuffs of your shirt, roll it back twice (it can be untidy), and then pull it to your preferred position.

A must-have for the master roll method for trendy men

It is also called the roll method because they like to use this method to dress up the model. The master roll method is more fashionable and exquisite, suitable for trendy men.

Specific steps:Unbutton the cuffs of the shirt and fold the cuffs back to the middle of the elbows. Then roll the end sleeve one more time toward the elbow to reveal a little bit of the cuff part.

The sleeves of the shirt are rolled up with cufflinks in the middle of the forearm, so it looks the best. This roll method is more suitable for office people, and it is not easy to stain clothes when working. What's more, it's going to be more skilled.

Unbutton the sleeves and roll up the cuffs, and the inside

Turn it out, pull the cuff dao, pull it in the direction of the upper arm, don't fold it, and keep turning the sleeve out. Generally speaking, it is enough to roll two layers, and according to people's aesthetic feelings, this volume method is very aesthetic. Of course, different shirts have different ways to roll, and hard shirts and soft shirts are also different.

Isn't there a piece of cloth attached to the front of the shirt sleeve? It's the part with the buckle that's thicker, and it's good to roll it up at that width, so it won't be straightened and won't fall off.

Classic volume.

An always reliable option is to simply roll your sleeves 2 to 3 times, folding evenly over each roll. This is very beautiful for thicker shirts like gauze or flannel.

The best thing to do is to simply roll your sleeves in 2 to 3 layers, being sure to fold evenly over each roller and not large or small. This is very beautiful for thicker shirts like gauze or flannel.

Loosen the two buttons on the edge of the cuff; Pull the entire cuff up to the elbow; Roll up from the lowest part of the elbow position, and finally expose the 1 3 on the edge of the cuff. This method of rolling up the cuffs works on almost all shirts. At the same time, it seems to be more natural and comfortable, so it is highly recommended.

Unbutton the cuffs of the shirt and fold the cuffs back to the middle of the elbows. Then will be the end of the power.

The end sleeves are rolled up to the elbows one more time, revealing a little bit of the cuff part. The part that exposes the cuffs depends on the material of the shirt, and for thicker fabrics such as corduroy and oxford cloth, only a little edge can be exposed; Shirts made of linen and light cotton can be exposed, and even a large ruffle can be turned up.

The so-called natural roll is the most concise and easy-to-operate roll, and the sleeve is rolled below the elbow. This casual curl is suitable for men of all heights and sizes, but remember to adjust the height of the armroll according to the length of your arm.

Don't fold the rolls, just pick them up. The more casual the more handsome, the more neatly rolled up like a repairman.