How to install the wardrobe partition buckle and how to fix the wardrobe partition

There are many ways to fix the partition of the <> wardrobe, among which the more common ones are the following:

Use a partition support: A partition support is an accessory specifically designed to hold a partition in place, usually made of metal or plastic. Secure the divider by inserting the partition support into the reserved hole in the wardrobe riser and placing the partition above the support.

Clamping: A clamp is a tool that holds a partition in place, usually made of metal. Clip the clip between the partition and the wardrobe riser to make sure the partition doesn't wobble.

Use fixed socks to ruin the world's fixed corner code: A fixed corner code is an accessory that connects wardrobe risers and partitions, usually made of metal or plastic. Install the fixed corner code on the wardrobe riser, and then place the partition on the corner code and fix it with screws.

Use glue to fix: apply an appropriate amount of glue to the wardrobe riser, and also apply glue to the contact surface of the septum board, then place the partition on the riser and press it hard to fix.

It should be noted that when fixing the partition, the appropriate fixing method should be selected, according to the partition and the material, weight, use requirements and other factors of the wardrobe to ensure that the fixation is firm and stable.

The wardrobe can not only hang our clothes, but also put a lot of unused sundries, and many people will install partitions in the wardrobe to store items in a classified manner, which will be more convenient when we are looking for them. Today, I will talk to you about how the partition of the wardrobe is fixed, and how we maintain the wardrobe in our daily life.

1. How to fix the wardrobe partition.

1. We need to cut the groove in the wall first, about five centimeters, a little wider than the partition, and then hit the expansion screw on it, and drill the hole corresponding to the expansion screw at the same distance from the partition. Then put some concrete on it and put heavier objects on it.

2. Go to a hardware store or supermarket to buy a few retainers, and then install the retainers on the partitions on both sides of the cabinet. Then go to the building materials market or supermarket to choose the model of the plank, if we want to choose by ourselves, we must measure the size in advance, and then call the construction personnel to cut the evidence.

3. If you don't paint it, go to a decoration store or hardware store to buy self-spray paint. Measure the size in advance, and then cut the aluminum-plastic panel according to the size, and after cutting, stick it in the cabinet with adhesive, but the adhesive contains formaldehyde, which is sucked into the nasal cavity, which will affect human health.

Second, how to maintain the clothes and clear the drawer.

1. The interior should be kept in a good state of ventilation, most of the wardrobes are made of wood, if the space where the cabinet is placed is too humid, it will cause the wood to be damp, and then there will be a lot of small insects. When we hang clothes inside, we must feel whether the clothes are dry, if they are a little wet, we can't put them in the cabinet, and wait for them to dry before putting them in.

2. In order to maintain its beauty, we should regularly clean up the dust on its surface, take a damp rag, and gently wipe its surface. When we clean, we should not use corrosive cleaning agents, otherwise it will cause corrosion on the surface of the cabinet. When we wipe the metal parts inside the cabinet, we need to use a dry rag, and if we use a wet rag, it will cause the metal to rust.

There are many ways to fix the wardrobe partition, and the choice of Gu Chang dust depends on the design and material of the wardrobe. Here are some common fixation methods:

Use support columns: Install support columns on the side panels of your wardrobe, the partitions can rest against the support columns, and then use screws or nails to secure the partitions to the support columns.

Use a Partition Clamp: A Partition Clamp is a type of fixture that is specifically designed to hold a partition and clamp it to the side panels of your wardrobe. This fixture usually has an adjustable design and is suitable for different thicknesses of partitions.

Use angle iron or metal brackets: Attach the angle iron or metal bracket to the side panels and dividers of your wardrobe, then use screws or nuts to attach them securely.

Use wooden tenon connection: Make a wooden tenon connection at the interface between the side panel and the partition of the wardrobe, so that a tight connection is formed between the partition and the side panel. This method requires certain carpentry skills and tools.

1. Cut a groove of about 5 cm in the wall, slightly wider than the partition, and then hit an expansion screw.

Drill holes equal to the expansion screws at the same distance from the partition, and put them on concrete, or put some slightly heavier objects.

2. The wall is perforated horizontally, the wooden wedge is topped, the wall is about less than 10 cm, and the outside is about 10 cm long, pay attention to the thickness of the wooden wedge should be the same as the thickness of the partition, and use the partition to fill the gap between the wooden wedges; Or lay another layer of partition on the top and fill the gap between the wooden wedges below, and finally the total thickness is two layers of wooden wedges.

3. It can be fixed on the partition on both sides of the cabinet Supermarkets and family hardware counters are sold; Measure the size first, choose the model of the plank, go to the home improvement supermarket or the building materials market to buy the drama, there are many types, you can choose the one that suits you, and then call the workers to cut the drama.

4. There is no painting, you can buy the kind of spray paint, home decoration or hardware monopoly. The easiest solution is to stick wallpaper on the partition. Buy an aluminum-plastic panel, measure the size, and stick it to the cabinet with adhesive after cutting, the adhesive contains formaldehyde, and the formaldehyde released later will seep into the items you place in the cabinet.

Now they are all panel furniture, and there are holes in the position of the wardrobe partition, and the partition is also connected with holes, with special bolts, and then there is a decorative lock fastening. Generally, partitions are set at centimeters, and they can also be set up in places that are convenient for taking things according to the height of the owner. There are small hardware pieces that support the partition in the building materials, and there are many brands and shapes.

It can be chosen according to your preference.

1. Set fixers on the partitions on both sides of the cabinet There are family hardware counters in the supermarket;

2. Plank model. There are many in the home improvement supermarket or building materials market, you can choose by yourself, measure the size first, and then call the workers to cut the drama;

3. No painting. The easiest solution is to buy a roll of wallpaper and stick the wallpaper on the partition, which looks good.

1. Prepare the materials, Phillips screwdriver.

2. Twist the screws.

3. Until the gap is facing the vertical board, you can remove the partition.

The partition is designed and the partition is placed in a suitable position with a bite insert to take out the partition nail. Saw off the middle of the partition directly, and after removing a screw underneath, sawed off the partition or smashed the partition. Twist the screws.

Until the notch is directly opposite the vertical board, the partition can be removed.

If you are using modular or custom-made furniture, the partitions are connected by 3-in-1 fasteners. It will take a professional worker to your home to disassemble and assemble.

If the design is a movable partition, then take out the partition nail with bite insertion and place it in the right position to put the partition on it!

If your partition is fixed and fixed without intention, just smash it with a hammer and break the protruding nails.

I don't know what kind of assembly process it is, how to tell you about the installation!

A wardrobe is indispensable for a family, not only for storing clothes, hats, shoes, but also for beautifying the space, and if you want to remove the wardrobe partition, you can also do it. So how to remove the locks of the wardrobe partition and how to maintain the wardrobe, do you understand? Now let's take a look.

First, how to remove the wardrobe partition is a lock.

1. Use props to remove the partition nails on the wardrobe and install them in the appropriate position; 2. Saw off the middle position of the partition and remove the internal screws; 3. Saw the partition and unscrew the screws with a screwdriver; 4. When the notch and the vertical board can be together, the partition can be removed.

Second, how to do the maintenance of the wardrobe.

1. Whether the outer surface of the wardrobe is clean or tidy directly affects the overall aesthetic effect of the interior, so it is necessary to do regular cleaning work on the wardrobe, and try not to use knives or hard objects to touch the wardrobe, otherwise it is easy to scratch the wardrobe. If there are scratches on the wardrobe, they need to be repaired with paint of the same color, and then wax the surface of the wardrobe for protection.

2. Test the connectors of the wardrobe from time to time to see if there is any loose damage. If there is already loosening, then you need to add a small amount of lubricating oil inside and tighten it, which can effectively prevent the wardrobe from being corroded by rust. If there is trouble in the later disassembly and assembly of the wardrobe, you should contact the manufacturer in time to deal with it.

3. The wardrobe needs to be cleaned frequently, and there can be no too much dust left, otherwise it will affect the normal use. And in the track of the wardrobe door, there can be no more debris left so as not to jam the wheels. The dust on the internal lever needs to be wiped with a rag, and when it is dry, then put the clothes in the spine and go.

About how to remove the locks of the wardrobe partition and how to maintain the wardrobe, I will introduce it here, do you understand? It is not difficult to remove the wardrobe divider, but you need to pay attention to the force in the disassembly process to avoid damage to the wardrobe as a whole.