Is cement mortar good for wall tiles? Or is pure cement better?

With the continuous improvement of people's living standards, every family will buy a house, and the second is to buy a house in a big city, facing a variety of decoration problems, among which the wall is a big problem. And the wall has become a problem, what kind of material is better to choose? Is it slurry or pure cement?

Let's briefly analyze it.

Now home decoration, everyone likes to choose some very beautiful wall tiles, because the development of ceramic tiles is very fast, a variety of materials, various sizes of tiles have appeared. Therefore, most people will choose to use ceramic tiles when they are strong, and the tiles are not only beautiful and beautiful, but also not high. usecement mortarSticking tiles to the wall is the most traditional way to apply tiles, which is the wet paste method that we often hear.

When tiling, cement and sand are mixed evenly in a certain proportion to paste the tiles.

The reason why cement mortar can stick the tiles is actually relying on a mechanical tension formed between the cement mortar and the tiles after solidification. One of the main aspects of this pull is to rely on the cement mortar and the back of the tilePorositybetween the interpenetration of the resulting tension. The professional term is called mechanical pro-mating force, and the stronger the mechanical mating force, the stronger the tile will be.

Generally speaking, when we use pure cement, that is, when using cement mortar, a thin layer of cement grout is applied on the back of the tile. This is done to enhance the strength of this cement mortar. However, it is estimated that it is impossible to use pure cement alone to attach wall tiles.

Pure cement, which is our ordinary Portland cement.

It is particularly rigid after solidification, and strong rigidity will lead to delamination of the wall. The back of the tile can also be delaminated. Therefore, few people generally use pure cement to directly apply tiles.

To sum up, it is generally better to use cement mortar when laying wall tiles, because pure cement has no adhesion at all and cannot be used to pave wall tiles.

It is better to be pure cement, because the cement is very pure, the adhesion will be particularly good, the tile will be particularly strong when glued to it, and the smoothness will be very good.

It is better to use cement mortar to lay wall tiles, because pure cement only has hardness, no toughness, and pure cement will crack the wall tiles, and the use of cement mortar will be easier to operate than pure cement.

Personally, I think it's better to use pure cement, because it's not only strong, but also noise-resistant, and that's where it comes to it.

When decorating their home, many people will choose some beautiful wall tiles to add some texture to their home. Because the ceramic tile market is very large, the development of ceramic tiles is also very fast, and consumers have a lot of choices. So, when we choose our favorite tiles, how to stick these tiles on the wall has become a very important problem.

Generally, we choose to use cement as the main adhesive material when laying tiles on the wall. However, there are also many particulars about using cement stickers, some use pure cement stickers, and some use cement and mortar to paste. So about the wall tiles, is it generally better to use cement mortar or pure cement?

Here's what I think:

First, it is better to use cement mortar to pave wall tiles.

When laying wall tiles, we generally choose a more traditional way is to use cement mortar to stick to the wall, which is generally what we often call the wet pasting method. The specific method is to mix cement and sand in a certain proportion, stir evenly, and then paste the mixed cement mortar to the wall tiles. In this way, the wall tiles will be glued more firmly.

Second, the use of pure cement wall tiles will cause delamination.

Many people think that pure cement can also fix the wall tiles, why can't they use pure cement to stick the wall tiles? One of the important reasons is that although pure cement has a certain fixed effect on the wall tiles, the rigidity of the pure cement will be particularly strong after solidification, and the strong rigidity may cause the wall to fall off, so that the wall tiles will naturally fall off. Therefore, you can't use pure cement to stick wall tiles.

3. I hope we can all decorate our own satisfactory homes.

When renovating our own home, we really have to take it into account every step of the way, hoping that each of us can decorate a new home that we are satisfied with.

When we lay tiles, which one should we choose? Judging from the several ceramic tile paving materials mentioned above, we can summarize several ways when tiling tiles:1

traditional cement mortar paving; 2.Tile back coating glue + cement mortar; 3.tile adhesive paving; 4.

Tile back coating glue + tile adhesive paving.

Personally, I think that in the case of sufficient budget and the pursuit of tile bonding effect, it will be better to choose tile adhesive paving for the whole house, but it should be noted that if you want to do floor tiles on the wall, paving large-size tiles with low water absorption, such as vitrified tiles, polished tiles, full glaze, full-body bricks, etc., it is best to use ceramic tile back coating glue + tile adhesive combination paving.

If the budget is average, you can choose traditional cement mortar paving when laying floor tiles, after all, the traditional cement mortar paving is more mature, and the ground is leveled, and the thickness is enough, the tiles rarely appear hollow.

Can you use cement mortar to pave wall tiles? The answer is also yes, but it is recommended to only use wall tiles with high water absorption, low density, and size specifications below 300*600.

1.First of all, the wall tiles must not be made of pure cement, so that they are evenly distributed, fixed support and other steps, after the mixing needs to be placed still for about 10 minutes, not only the adhesion force is three times that of cement river sand, which helps to increase the adhesion force, and it is easy to make the tile hollow and crack after paving, and the requirements for natural adhesion force are higher. 3. Reduced water absorption:

20kg powder 6kg water), and during construction, you can omit wetting the wall, pour the porcelain paste powder into clean water and stir it into a paste (mixing ratio, soaking tiles, and at the same time the size becomes larger, and the expansion coefficient of pure cement is too large after adding water. Therefore, it is recommended to use special tile adhesive for paving.

It is better to use cement mortar, because pure cement is not very good and is prone to cracking.

If your budget is sufficient, then it is definitely a better choice of cement, pure cement is a good choice.

Summary. Hello dear, the following is the answer I gave you, take a look; Plastering is better. The grouting process saves cement, but the survival quality of the 5mm thick plain cement slurry paste behind the tile is much better than that of the grouting process, and the firmness of the paste is better.

Grouting effect, paste tile grouting method, especially labor-saving, labor-saving, material-saving, will not delay the construction period, at least paste the tile, can better shorten the construction period, in the grouting process, no matter how careful, the grout is likely to splash on other tiles, cleaning is particularly laborious, once the corner of the tile appears hollow, the gap is difficult to penetrate into the adhesive paste, the tile grout paste effect is easy to hollow. Plastering effect As mentioned earlier, it is relatively easy to plaster the back of the tile, eliminating the procedure of grouting, which not only saves the material, but also the quality of the paste. There is no excessive moisture in the cement mortar, and it shrinks and solidifies in the normal time, which is more clear, that is, the cement mortar has good early strength and strong tiles.

There will be no slippage, displacement, etc., and the plastering effect is better in comparison.

It is better to pour the floor tiles, or to plaster.

Hello dear, the following is the answer I gave you, take a look; Plastering is better. The grouting process saves cement, but the survival quality of the 5mm thick plain cement slurry paste behind the tile is much better than that of the grouting process, and the firmness of the paste is better. Grouting effect, paste tile grouting method, especially labor-saving, labor-saving, material-saving, will not delay the construction period, at least paste the tile this town, can better shorten the construction period, in the grouting process, no matter how careful, the grout has can be wiped out on the brigade can splash on other tiles, cleaning is particularly laborious, once the corner of the tile appears hollow, the gap is difficult to penetrate into the adhesive paste, the tile grout paste effect is easy to hollow.

Plastering effect As mentioned earlier, it is relatively easy to plaster the back of the tile, eliminating the procedure of grouting, so that it does not only save material and paste quality. There is no excessive moisture in the cement mortar, and it shrinks and solidifies in the normal time, which is more clear, that is, the cement mortar has good early strength and strong tiles. There will be no slippage, displacement, etc., and the plastering effect is better in comparison.

The floor tile plastering paste will not be empty.

Plastering is done well and basically not.

No matter what kind of floor tiles, do not use pure cement.

1. It is best not to use pure cement slurry when pasting floor tiles, but to use cement mortar. If pure cement slurry is used to stick to the floor tiles, the floor tiles will shrink too much in the process of hardening, and there will be a large tensile force, so that the floor tiles will be torn apart.

2. Under normal circumstances, only when paving small tiles, pure cement slurry will be used, because the cement will be much more expensive than the sand, if the pure cement slurry is used to pave the floor tiles, then the decoration cost required for the floor tiles will generally increase by about three times.

3. In addition, the shrinkage of pure cement slurry will be relatively large, and it is easy to appear uneven, which will lead to hollowing or falling off of the floor tiles, so cement mortar is generally used when sticking to the floor tiles, but some friends choose to use tile adhesive, which has better viscosity, but contains a small amount of formaldehyde, and is also more expensive.

4. If the water absorption rate of the tile is relatively low, then you can not use cement mortar for pasting, and you should choose to use tile adhesive for paving. Because the water absorption rate is relatively low, the porosity on the back of it will generally be smaller, if the use of cement mortar paste, then the cement mortar and the tile generally can not form an effective bond, after a long time, the tile is prone to hollowing, falling off.

Pro, the use of pure cement for floor tiles has the following characteristics: 1When using pure cement to paste tiles, from the construction technology and construction technology, it will be more mature than other ways, and the time consumption is relatively short, and the effect of pasting is also very good.

2.The use of pure cement paste tiles is relatively low, whether it is material cost or labor cost, can better save the decoration budget, and Zheng Hui and can spend the decoration budget on some other decoration projects. 3.

When using pure cement to paste tiles, the adhesion degree is also relatively high, so the pasted tiles are not easy to fall off or the pin is cracked.