Pure cement or cement mortar for wall tiles? Which do you think is better?

Cement mortar is used for wall tiles, I think cement mortar is better. In the case of wall tiles, we generally choose a more traditional form is to use cement cement mortar to stick to the wall, this kind of method is generally known as the wet hanging method. The practical method is to mix the cement and sand according to a certain ratio, and after mixing evenly, the mixed cement cement mortar is pasted to the wall tiles.

In that way, the wall tiles will stick very strongly.

Many people feel that pure cement can also fix the wall tiles, so why not use pure cement to stick the wall tiles. One of the main factors is that although pure cement has a certain stabilizing effect on wall tiles, the rigidity of pure cement will be particularly strong after condensation, and strong rigidity may cause the wall to fall, in that case, the wall tiles will of course fall down. Therefore, it is not possible to use pure cement to paste wall tiles.

In order to better advance the design of the packaging in the walls must be mixed with cement mortar, floor tiles, if it is best to encapsulate the tiles in the form of glue.

Only to the adhesive is added, and the proportion of the construction of the site will be maintained according to the way in which it is equipped with detailed instructions. It is determined that the assembly is evenly distributed in pure cement, suitable and other processes, and then mixed, and at the same time can also be used three times cement slurry, the effect of sand formation, which is beneficial to improve the slurry bonding, and then facilitate the application of floor tile gaps, the standard of course bonding is much higher.

Cement mortar, now plastic foam, windows and touching the previous expansion coefficient has expanded to release pressure, styrofoam, very easy to deform the door cover. The polyethylene plastic foam must be covered with sealant prior to normal application. The dust was not painted well, and the pool could not be used to protect the house from moisture and mixed paint inside the normal dark gray mixed cement walls and sand-plaster walls.

The difference between concrete and cement cement mortar, the mixed material of cement and sand is called cement cement mortar, and the mixed material of cement, sand and lime is called plastering mortar.

When laying wall bricks, try to use cement mortar, so that the bricks are better, not easy, and the bulge is not easy to fall off.

cement mortar for wall tiles; I think cement mortar will be better, because it has a particularly strong water retention, and the tiles do not need to be soaked in water when used, and there is no need to consider the bonding strength, which is very convenient.

If you are sticking wall tiles, use cement mortar.

It's better. Because pure cement after adding water, its expansion becomes larger, and it is used to paste wall tiles, which is easy to make the tiles hollow.

or cracking. The use of cement mortar to stick the wall tiles can make the tiles stronger, because after the cement mortar is solidified, the tensile force generated between it and the wall tiles will make the wall tiles stick more stable.

When decorating their home, many people will choose some beautiful wall tiles to add some texture to their home. Because the ceramic tile market is very large, the development of ceramic tiles is also very fast, and consumers have a lot of choices. So, when we choose our favorite tiles, how to stick these tiles on the wall has become a very important problem.

Generally, we choose to use cement as the main adhesive material when laying tiles on the wall. However, there are also many particulars about using cement stickers, some use pure cement stickers, and some use cement and mortar to paste. So about the wall tiles, is it generally better to use cement mortar or pure cement?

Here's what I think:

First, it is better to use cement mortar to pave wall tiles.

When laying wall tiles, we generally choose a more traditional way is to use cement mortar to stick to the wall, which is generally what we often call the wet pasting method. The specific method is to mix cement and sand in a certain proportion, stir evenly, and then paste the mixed cement mortar to the wall tiles. In this way, the wall tiles will be glued more firmly.

Second, the use of pure cement wall tiles will cause delamination.

Many people think that pure cement can also fix the wall tiles, why can't they use pure cement to stick the wall tiles? One of the important reasons is that although pure cement has a certain fixed effect on the wall tiles, the rigidity of the pure cement will be particularly strong after solidification, and the strong rigidity may cause the wall to fall off, so that the wall tiles will naturally fall off. Therefore, you can't use pure cement to stick wall tiles.

3. I hope we can all decorate our own satisfactory homes.

When renovating our own home, we really have to take it into account every step of the way, hoping that each of us can decorate a new home that we are satisfied with.

When we lay tiles, which one should we choose? Judging from the several ceramic tile paving materials mentioned above, we can summarize several ways when tiling tiles:1

traditional cement mortar paving; 2.Tile back coating glue + cement mortar; 3.tile adhesive paving; 4.

Tile back coating glue + tile adhesive paving.

Personally, I think that in the case of sufficient budget and the pursuit of tile bonding effect, it will be better to choose tile adhesive paving for the whole house, but it should be noted that if you want to do floor tiles on the wall, paving large-size tiles with low water absorption, such as vitrified tiles, polished tiles, full glaze, full-body bricks, etc., it is best to use ceramic tile back coating glue + tile adhesive combination paving.

If the budget is average, you can choose traditional cement mortar paving when laying floor tiles, after all, the traditional cement mortar paving is more mature, and the ground is leveled, and the thickness is enough, the tiles rarely appear hollow.

Can you use cement mortar to pave wall tiles? The answer is also yes, but it is recommended to only use wall tiles with high water absorption, low density, and size specifications below 300*600.

1.First of all, the wall tiles must not be made of pure cement, so that they are evenly distributed, fixed support and other steps, after the mixing needs to be placed still for about 10 minutes, not only the adhesion force is three times that of cement river sand, which helps to increase the adhesion force, and it is easy to make the tile hollow and crack after paving, and the requirements for natural adhesion force are higher. 3. Reduced water absorption:

20kg powder 6kg water), and during construction, you can omit wetting the wall, pour the porcelain paste powder into clean water and stir it into a paste (mixing ratio, soaking tiles, and at the same time the size becomes larger, and the expansion coefficient of pure cement is too large after adding water. Therefore, it is recommended to use special tile adhesive for paving.

It is better to use cement mortar, because pure cement is not very good and is prone to cracking.

If your budget is sufficient, then it is definitely a better choice of cement, pure cement is a good choice.

The application of cement cement mortar to the wall tiles is the most traditional way to apply tiles, which is the wet hanging method we often hear. In the case of floor tiles, cement and sand are mixed evenly according to a certain proportion to paste the floor tiles。Cement cement mortar can often paste the tiles, in fact, it relies on the tensile force of a device generated between the cement cement mortar and the wall tiles after setting.

One of the most important tensile forces is the tensile force caused by the mutual penetration between the cement mortar and the porosity of the back of the floor tiles. The proper noun of technical expertise is called mechanical equipment embedding cooperation. The stronger the mechanical equipment, the stronger the tile will be.

Nowadays, this kind of practice is getting lower and lower, but cement cement mortar is the most traditional auxiliary method, and the ratio of cement and sand is generally 1:2;The greater the cement, the stronger the tensile strength, and this kind of auxiliary wall tile is generally called wet auxiliary method. This kind of wet auxiliary method is mainly based on a kind of natural door handle produced by cement cement mortar and wall tiles after condensation; This kind of tensile force is mainly based on the interaction between the eyeball on the opposite side of the wall tile and the cement cement mortar, but when using this kind of auxiliary method, we must remember that the market share of cement is too high, otherwise the cement will be established after the condensation of course, the door handle will crack the wall tiles.

Many customers have cracked after the end of the auxiliary installation of the wall tiles in the bathroom, and the customers want to blame the wall tiles of the store for product quality problems, which is caused by the wrong proportion of mortar in the work.

There are many kinds of pure cement, masonry batch putty cement, floor leveling cement, masonry ground leveling two-in-one cement, composite Portland cement, six or nine quick-setting cement, interior decoration can not use pure cement to pave wall tiles, with masonry batch putty cement to pave wall tiles, the initial compressive strength is not very good, there is almost no compressive strength, if the masonry batch putty pure cement is used to pave the wall tiles, there will be product quality problems, because there is no actual effect of final setting, Therefore, it is impossible to condense at all, and there is no doubt that the cement paved wall tiles without condensation will fall.

Masonry batch putty cement is more common, cohesiveness and water retention performance is better, the key is made of dynamic thermoplastic resin, coal ash and hydrated lime powder putty powder mixture, the main push is used to masonry scrape the wall, the project temporary settlement of simple mobile houses, can also be used for large buildings to do backfill, because the masonry cement is affordable, the sales volume of the decoration industry has been good, the general self-built house wall plastering wall is a good choice, the biggest advantage of masonry cement, the price is affordable,The construction of the project is simple and convenient, and there are some project construction community owners who use masonry cement to make cement pavement, save decoration costs, and the cost is lower.

cement mortar; Cement mortar is better, the service life will be longer, and it is also very convenient when cleaning.

Cement mortar will be stronger, pure cement is not strong, and the cost is also high.

Houses like cement mortar have good breathable building strength, and are good building materials that can play a waterproof role.

When decorating a house, everyone likes to choose beautiful wall tiles as decoration, but in the process of tile sticking to the wall, how to make the tiles stick firmly to the wall? Cement slurry or pure cement for decoration wall tiles? This is a very critical question, in addition to another point that cannot be easily ignored, that is, how to choose the tiling material?

With questions, this article will take you to the end.

Decoration of wall tiles with cement mortar or pure cement.

Cement slurry or pure cement for decoration wall tiles is undoubtedly cement slurry. The use of cement slurry is a long-standing method of sticking wall tiles, that is, we often say the wet paste method, which is mixed with sand and cement in a certain proportion, with strong viscosity, after the cement mortar is solidified, it will be interpenetrated with the porosity of the back of the tile to produce a tensile force, so that the wall tiles are not easy to drop the material.

Why is it not recommended to use pure cement? First, the expansion coefficient of pure cement is too large after adding water, and at the same time, the rigidity is particularly strong after solidification, which will crack the tile or cause the tile to be uneven, and even the wall will be delaminated; Second, if pure cement is used, the cost is too high, and the economy is less cost-effective.

How to choose a tiling material.

Different wall tile materials should be used to make the tiles fit the wall perfectly and present the best results.

For ceramic tiles with low water absorption, such as full-body tiles, polished tiles, vitrified tiles, microchips, etc., tile adhesive can be used to paste tiles, or tile adhesive can be used, and then equipped with cement mortar or matching tile adhesive to paste tiles; For ceramic tiles with high water absorption, such as glazed tiles, porcelain tiles, mosaics, etc., you can choose ordinary cement mortar, or you can use tile adhesive to paste, or use tile adhesive and corresponding adhesive materials to paste the tiles on the wall;

About the decoration of wall tiles with cement mortar or pure cement, has sorted out some suggestions, I believe all friends have understood, in addition to the choice of tiling materials should also be screened and matched according to the material of the tile, which should be paid attention to when purchasing.

Cement mortar should be used, if pure cement is used, cracks will easily appear, and cement mortar will make the wall tiles stick very strongly.

Cement mortar should be used, which can avoid hollowing or cracking, and can ensure stability.

Cement mortar should be used for wall tiles, not pure cement, pure cement is not economical, and the cost is high.

1. Different properties: plastering mortar is a kind of mortar that should be applied to level or provide protection on the base surface of the building. Masonry mortar is a mortar that turns bricks, stones, blocks and other blocks into masonry.

2. Different characteristics: the walls of masonry mortar multi-storey houses are generally made of cement lime with a strength grade of M5. Plastering mortar is divided into on-site stirring mortar and ready-mixed dry powder plastering mortar according to different operations, and ready-mixed dry powder plastering mortar is one of the commercial mortars.

3. Different uses: plastering mortar, such as lightweight walls such as aerated concrete blocks, fly ash blocks, ceramsite bricks, etc., and plastering mortar that is directly scraped on the surface of concrete shear walls. If the cement strength grade of masonry mortar is too high, some mixed materials can be added.

For some special purposes, such as configuring joints and joints of components, or for structural reinforcement and repair of cracks, intumescent cement should be used.