Why is it not recommended to make a yang angle line at the corner when decorating?

It is inevitable to encounter the problem of the sunny angle when decorating, and the vacated junction line is very ugly and impractical, so it needs to be dealt with through the sunny angle line. Generally, there are many materials for the yang angle line, the common ones are gypsum line, stainless steel, aluminum alloy, etc., and the tile yang angle line is a relatively less used way, because it can save decoration materials and is still used by people as a way to deal with the yang angle, so what are the disadvantages of the tile yang angle line? If you have a friend in need, hurry up and take a look.

What is the tile yang angle line, the tile yang angle line is a kind of tile grinding into a 45 degree chamfer directly as a decorative way of the yang angle, its process requires extremely high precision, you need to cut the two tiles into 45 degrees each, and paste them at the yang corner into a 90 degree corner. The effect formed in this way is more beautiful, the style is unified, there will be no color difference or uncoordinated matching, and the overall appearance is stronger than other yin corner lines. It can save the cost of purchasing high-grade yang angle line, reduce the waste of tile materials, and be used in corner places such as window openings and door corners.

What are the disadvantages of the tile yang angle line because of the high process accuracy required, which is a very test of the technical level of the workers, so the construction process is more troublesome and time-consuming. When the yang angle line is docked, it is not right, especially the yang angle part of the opposite sex, if the chamfer is too thin, it is fragile to touch it, and if it is too thick, it will cause an obvious fish mouth corner after paving, which is very ugly, which causes a waste of materials. The bonding between the 45 degree angles is not completely sealed, there will be a certain gap, more or less there will be a little hollow part, if you accidentally bump into it in use, it is easy to cause the tile to fall, affecting the overall aesthetics.

No matter how good the corner is, it does not rule out the possibility of cracks, and there will be different degrees of stretching porcelain due to the influence of thermal expansion and cold contraction. The corners formed by the collage of two tiles are very sharp and sharp, and if the clothes are accidentally hooked when passing by, it is easy to be scratched; There are elderly people or children at home when walking around there are also hidden dangers of injury, if you accidentally bump into it, it will be easy to be injured, which is also the biggest disadvantage of the tile yang angle line.

On the one hand, it is not beautiful, and on the other hand, the color difference and sensitivity of this corner are very different, so I don't mind making a positive angle line at the corner again.

Because it is no longer popular to make a positive angle line at the corner, and it is a waste of space. It looks very unsightly. So it is not recommended to do it.

1. Because of the high process accuracy required, the technical level of the workers is very tested, so the construction process is more troublesome.

The bonding between the 245-degree angles is not completely sealed, and there will be more or less a little hollow part, which is accidentally bumped into in use, which is easy to cause the tile to fall and affect the overall aesthetics.

3. The corners formed by the collage of two tiles are very sharp and sharp, and they are easy to be scratched; There is also a risk of injury when there are elderly people or children in the house.

When decorating, it is not recommended to make a sunny corner at the corner.

Line, why? What are the disadvantages of making a positive line at a corner? Because of the high precision of the required process, it is a great test of the technical level of the workers, so the construction process is troublesome and time-consuming.

The corners of the two tiles are very sharp, and there are elderly people or children walking around in the house, and there is a hidden danger of injury.

Decoration angle line refers to the decorative line installed in the sunny corner of the wall, including the sunny angle line used by oilers to paint the wall, the sunny angle line used by bricklayers to paste wall tiles, and the decorative line decorated by carpenters on the sunny corner of the wall. It is not recommended to do a positive line at the corner, which refers to the positive line of the bricklayer.

1.Because of the high precision of the required process, it is a great test of the technical level of the workers, so the construction process is troublesome and time-consuming. It's not right when the male horn line is docked, especially the male horn of the opposite sex. If chamfered.

If it's too thin, it's fragile and falls off when touched. If it is too thick, there will be obvious corners of the fish's mouth after paving, which is very unsightly, resulting in a waste of material.

2.The corners of the two tiles are very pointed. If your clothes are accidentally hooked when passing by, you can easily get scratched; There are elderly people or children in the house, and there is a hidden danger of injury when walking around. If you accidentally bump into them, you can easily get injured, which is also the biggest disadvantage of the tile yang angle line.

3.Compared with the yang angle line pasting method, the angle touching process is economical and practical, and the color is uniform, so the appearance is beautiful and generous, and the decorative effect is particularly good. After all, the color of the yang angle line and the color of the tile are not uniform. Common plaster lines.

Aluminum alloy, etc. They are easily deformed by moisture, and their appearance is not very good.

4.Other ceramic tile corner decoration construction methods. Another common way is to connect the tiles at a 45-degree angle, polish the edges of the tiles to a 45-degree bevel, and then stitch the tiles on both sides into a 90-degree positive angle.

The advantage of this method is that the wall tiles have good integrity and beautiful decoration. The disadvantage is that the construction is complex, the tile needs to be edging, and the poor quality ceramic tile is easy to collapse and break, and the durability is not good.

5.To sum up, the disadvantages of the tile yang angle line are mainly the high construction requirements and safety factor.

Low. Of course, there are also obvious advantages. After paving, the overall effect is unified, and the position of the yang angle is well handled. Professionals recommend using other materials for the treatment of the positive angle line to reduce some unnecessary trouble!

The main reason why it is not recommended to do the yang angle line at the corner is that if the technical treatment is not in place, it is easy to produce hollowing, which can easily lead to falling off. Doing a sunny line at the corner will increase unnecessary expenses, and if it is not handled properly, it will also affect the overall decoration and beauty.

Because the yang angle line is no longer popular, it is not only a waste of space, but also very ugly; It can fade, it's very ugly, it's a waste of material, it doesn't have a real effect, it hurts.

It is particularly easy to crack, not beautiful at all, and it is easy to hurt children. The test of the technical level of the workers is very high, the construction process is particularly troublesome, time-consuming, will hurt the ceramic tiles, will affect the overall aesthetics, will also be affected by thermal expansion and contraction, will hurt the children at home.

When decorating, it is not recommended to do the yang angle line at the corner, so the reason: because of the high precision of the specified processing technology, it is a huge hone for the technical strength of the workers, so the construction process is inconvenient and time-consuming. It's also not right when the yin angle line is connected, especially the male corner of the opposite sex.

If the chamfer is too thin, it is fragile and will fall off when touched. If it is too thick, it will produce a significant fish mouth after laying, which is very unsightly, resulting in the consumption of raw materials.

The corners of the two floor tiles are very pointed. If your clothes and pants are accidentally hooked when you pass by, it is very easy to be scratched; Walking with elderly people or children at home is also a safety hazard for injury. If you accidentally knock them down, it is easy to get injured, which is also the biggest disadvantage of the tile yang angle line.

Compared with the negative angle line sticking method, the corner processing technology is cost-effective and the color is symmetrical, so the appearance is unique and the decorative effect is particularly good. After all, the color of the yin angle line and the color of the wall tiles are not uniform. Common plaster lines, aluminum alloy profiles, etc.

It is very easy to regain moisture and deform, and the appearance is not very good.

Other ceramic tile corner decoration construction methods. Another commonly used form is that the floor tiles are connected at a 45-degree angle, the edges of the floor tiles are polished and polished into a 45-degree chamfer, and then the floor tiles on both sides are pieced together into a 90-degree positive angle. The advantage of this type of method is that the wall tiles are comprehensive, and the decorative design is beautiful and generous.

The disadvantage is that the construction of the project is complicated, the floor tiles must be polished, and the poor quality floor tiles are very easy to burst and damaged, and the durability is not very good. If you use general glazed tiles for interior and exterior walls, you can also use the yin corner line, and the construction of the project is convenient and cheap. If it is a porcelain floor tile on the wall, it is suitable to use the method of inverting the 45-degree inner angle to paste the yin and yang corners.

That is more obvious, the strength of the whole tile is also very high, not easy to have the problem of application level, the key is that the technology of the bricklayer should be timely and have to use the original chamfer.

The contour chart layer has a circular surface, so there is a certain resistance to the contradiction of the system software, which can reduce the damage caused by scientific research, and the contour chart has a good application. Negative corners save time. The assembly of the horn line has changed the current complicated construction process, reduced the work intensity of the workers, saved the working time, and greatly shortened the construction period.

Maintain the natural environment of the shady corner. The PVC multi-line route, which is relatively popular, has excellent environmental protection characteristics and has no adverse effects on the body and conditions, and has the advantages of flame retardant environmental protection.

Because this is not actually beautiful, and there may be a big difference due to color difference or some other reasons, and this way is actually no longer popular, and they will think that this will waste space and waste their budget.

The reason why there is such a statement is that it is very troublesome to repair the yang angle line at the corner, and it is easy to cause depression if it is subjected to external force, which is very ugly.

Because it is very inconvenient to repair when it is broken, and it will also affect the aesthetics.

It is not recommended to make the corner line when decorating, the reason is: it is inconvenient to repair when it is damaged, if the depression caused by external force is very ugly, replace it, you need to remove the corners on both sides, which is very troublesome.

This is because it is relatively inconvenient to make a positive angle line at the corner, and it does not look very beautiful, and it is relatively not very economical and cost-effective.

It's because it's easy to get dirty and messy, and it looks like there will be some lines, which will affect the overall aesthetics.

This is because after the yang angle line is made, the design style will not be unified, and the place will also appear particularly abrupt, and there will also be cracking or falling off.

When decorating, it is not recommended to do the yang angle line at the corner before the construction, so the reason for this: because of the high precision of the specified processing technology, the technical strength of the workers is a huge tempering of Hongkai, so the construction process is inconvenient and time-consuming.

The outer corner line of the tile is a decorative way to grind the tile into a 45-degree chamfer and directly use it as the outer corner of the tile. The process requires high precision. Two tiles need to be cut at a 45-degree angle and glued to the outer corners to form a 90-degree angle.

The effect formed in this way is more beautiful, the style is unified, there will be no color difference or uncoordinated collocation, and the overall appearance is stronger than other inner corner lines. It can save the cost of purchasing high-grade outer corner lines and reduce the waste of tile materials. It is mainly used in windows and corners of doorways.

When decorating, it is inevitable to encounter problems with the outer corners. An empty crossing line is ugly and impractical. At this time, we need to deal with them through the outer corners.

Generally speaking, there are many materials for exterior wall corners, such as gypsum wire, stainless steel, aluminum alloy, etc., while the exterior wall corners of ceramic tiles are used less because it can save decorative materials and is still treated as exterior wall corners. Due to the high precision of the required process, the technical level of the workers is checked, so the construction process is cumbersome and time-consuming.

It is not easy to connect the outer corners, especially the outer corners of the opposite sex. If the chamfer is too thin, it can easily fall off as soon as it comes into contact. If it is too thick, there will be obvious fish mouths after paving, which is very unsightly and causes waste of material.

The bond between the 45-degree angles is not completely closed, there will be a certain gap, more or less a little blank. If you are accidentally knocked down in use, it is easy to cause the tile to fall and affect the overall appearance.

No matter how good the angular fit is, the possibility of cracks cannot be ruled out. Due to the effects of thermal expansion and cold contraction, porcelain will have varying degrees of stretching. Generally speaking, the installation of the outer corner line is mainly to straighten the vertical edge line and protect the tiles, but most families will not install the outer corner line, because there is a certain risk of installing the outer corner line, that is, it may not be close to the wall during the installation process, and the accumulation of tiles may also lead to the risk of falling off when it collides or cracks in later use, therefore, many home decoration choose tiles with a 45-degree angle to the wall.

This is because if you do a yang angle line, it is likely to affect the overall pattern and space, and then it will also make the home look very unhigh-end and have no practicality.

Mainly because the yang candle at the corner is very easy to be damaged by bumps, so it is better not to do it.

The main reason is that the corners are often bumped, and if you do a bullish candle, it will increase the damage of the bump.

According to your description, it should be the bathroom or kitchen or the balcony needs to include the sunny corner such as the downpipe, the two methods you mentioned are very popular treatment methods at the moment, and they are more practical and beautiful. But the specific method to use depends on the specific situation, as said upstairs, stainless steel yang angle is afraid of touching, often touching will lead to deformation or falling off, affecting the appearance. In comparison, it is economical and practical to use 45 degrees to polish the wall tiles, and it is also more beautiful, and it is easier to wipe it easily when cleaning.

Of course, if for the overall effect of the decoration in the sun corner that is not often touched by the use of stainless steel corners, this can also add a lot of color to the overall effect of the decoration, often these details can better reflect the grade and taste of the decoration.

In addition, there is a treatment method similar to stainless steel cladding, which is to replace stainless steel cladding with another PVC cladding corner, of course, this method also has advantages and disadvantages. The advantage is that it can avoid the situation that the yang angle is sharp and easy to hurt people because of the 45-degree splicing angle, and it can better pass the angle formed by the two sides, so as to form a smooth small rounded corner, which is not easy to hurt people. There is also the fact that this method is very practical and economical, and it is easy to construct, and it is widely used in general bathroom or kitchen decoration.

The disadvantage is that compared with the first two methods, it is not very beautiful, which affects the effect in the middle and high-end decoration.