The room is equipped with an anti theft window, how to wipe the glass

Window cleaner with double-sided magnetic glass. People only need to stand indoors and wipe gently, and the two sides of the glass full of dust and oil stains are immediately clean as new, leaving no traces, and with an extended anti-fall line, it can solve the problem of cleaning glass in high-rise buildings.

How to use: When using double-sided glassware, first of all, the entire closed double-sided glassware should be separated (there is usually a sponge plate in the middle of the double-sided glassware with strong magnetic force), and the glassware should be infiltrated into clean water with dish soap, so that the sponge pad on the glassware can be moistened, and then the pull ring is put on the finger, and the part with the pull ring and rope is placed on the outside of the glass, and the part with the handle is placed on the inside of the glass, so that the two parts will coincide with the previous closure, so that they will rely on their own magnetic force to firmly clamp on the glass. At this time, the other hand can push and pull the handle on the inside to wipe the glass to achieve the effect of cleaning the double-sided glass.

The way to wipe the security window against the glass is: first, you need to separate the entire closed double-sided glass cleaner. Put the whole glassware into a basin with dish soap, moisten the sponge on top of the glass, and make it carry a cleanable dish soap water.

Put the pull tab on top of your finger and place a part of the pull tab and rope on the outside of the glass to prevent it from falling off during the process of cleaning the glass.

When scrubbing the glass, you can first apply chalk gray water or gypsum powder water, and then wipe it with a dry cloth after it is dry, which is easy to wipe off the dirt and easy to polish. Putting some indigo in the water will increase the shine of the glass. First use a damp cloth to wipe off the dust, and then rub the waste newspaper into a ball and wipe it on the glass, the ink of the newspaper can quickly wipe the glass clean.

The steps of installing anti-theft windows mainly include three steps: installing door and window frames, caulking, and door and window accessories.

[Prepare for attention]:

1. This process should be constructed after the plug mouth, and the structural construction shall not be carried out after the mouth is established.

2. Check whether the size of the door and window openings is 3cm larger than the size of the door and window frame, otherwise it should be chiseled first.

3. According to the size of the drawing, put the installation position line of the door and window frame and the elevation control line of the stand. Install the iron feet on the door and window frames.

Tools]: wooden wedges, rulers, bolts, electric drills.

Stainless steel anti-theft window construction steps:

1. Install the door and window frame: and find the verticality and elevation according to the line in place, temporarily fix it with a wooden wedge, check the vertical and diagonal lines of the front and side, and fix the iron feet and the structure firmly with expansion bolts after passing the qualification.

2. Caulking: The gap between the door and window frame and the wall should be filled with asphalt hemp wire or styrofoam according to the material caulking required by the design element. The surface is closed with a sealant with a thickness of 5 8mm.

3. Installation of door and window accessories: When installing, it should be drilled with an electric drill, and then screwed in with self-tapping screws, and it is strictly forbidden to beat with a hammer or hard object to prevent damage. After installation, pay attention to the protection of the finished product, anti-pollution, and prevent welding sparks from burning and damaging the surface layer.

Stainless steel anti-theft window construction - installation precautions.

1. First of all, what materials should be selected, there are roughly (iron pipes, stainless steel, color steel) on the market, etc., iron pipes are less ugly, stainless steel is now easy to rust, and color steel is not only beautiful in color but will not rust.

2. Consider whether each property has requirements for anti-theft windows to prevent modification. Air conditioning installation and future maintenance should be left with a small door for maintenance.

If you are buying a low-rise building, many people will install burglar-proof windows. The anti-theft window is basically made of glass, and you may encounter some problems when cleaning, such as it is difficult to wipe the glass. If you have encountered similar problems at home, friends who want to know about it can listen to the introduction.

1. What are the tips for wiping the glass of the anti-theft window?

1. If you want to wipe the glass of the anti-theft window clean and bright, first of all, we use a dry rag to wipe off the dust on the anti-theft window, and then prepare a basin of water, which can be put into a professional detergent, and then wipe it with a sponge or soft cloth. When cleaning the glass, you must pay attention to wipe it inside and outside, and then wipe it clean with a dry rag, so that the glass will be very neat and bright.

2. When cleaning the glass, we can also add some vinegar or alcohol, wipe the glass first, and then wipe it with a dry cloth, which will be very clean.

3. Some people recommend a method, that is, when scrubbing the glass, you can use chalk ash or gypsum powder, and then wipe it with a dry cloth after it is dry, and you will find that the glass will be very bright.

4. For oil or wax on the glass, we can mix a few drops of ammonia with soapy water, and then scrub it with a dry cloth.

2. What aspects need to be paid attention to when cleaning the glass.

1. When cleaning the glass, you must pay attention to personal safety, I heard a news, there is a lady who accidentally fell from the 5th floor of the home when cleaning the glass, and she stepped on the anti-theft window to scrub the glass of the window, but did not pay attention to the hinge below has been broken, so there was an accident of falling downstairs, we must ensure personal safety when cleaning the glass.

2. When scrubbing the glass, you must pay attention to the fact that some cleaning agents contain corrosiveness, do not add them casually, and it is best to wear gloves when scrubbing, which not only protects the glass, but also protects your hands.

Summary: It is not easy to scrub the glass of the security door, we need the right way to wipe it, so that we can achieve the desired effect, and it is easier to wipe the glass.