How to turn on Bluetooth on vivo mobile phones

After successful pairing, go to File Management to find the file you want to transfer and press and hold, and select "Bluetooth" to share.

The operation method of turning on Bluetooth on vivo mobile phone is as follows:

2. Swipe up from the lower left corner of the phone screen to debug the shortcut bar, and click the Bluetooth switch to turn it on.

vivo mobile phone uses the Bluetooth function method: enter the mobile phone settings--(more settings)--Bluetooth--turn on Bluetooth, after turning on, the phone will automatically search for nearby devices, click on the device name to pair the degree, after the pairing is successful, enter the file management to find the file that needs to be transferred and press and hold, and choose to use "Bluetooth" to share.

After successful pairing, go to File Management to find the file you want to transfer and press and hold, and select "Bluetooth" to share.

You can pull down the status bar to find the Bluetooth icon on, or you can go in and set the Bluetooth to select Start.

Taking the vivo X6S A version as an example, the way to connect the vivo mobile phone to Bluetooth is as follows:

Taking the vivo X6S A version as an example, the way to connect the vivo mobile phone to Bluetooth is as follows:

Tool: vivox9.

System: FunTouch OS.

1. Take vivox9 as an example, open the desktop of the mobile phone and swipe up the page from the bottom, as shown in the following figure:

2. A window pops up at the bottom of the page, click [Bluetooth], as shown in the following figure:

3. Then the Bluetooth icon turns blue as shown in the figure below:

5. The Bluetooth device has been connected, as shown in the figure below

1.Turn on the switch of the Bluetooth headset and press and hold the on/off key of the power supply until the red and blue lights flash alternately. At this point, the earbuds are ready to be paired.

3.After searching for vivo bluetooth headset, then find it in the bluetooth of the mobile phone, select the vovo bluetooth headset for pairing and connection, enter the pairing password on the mobile phone: 0000, and complete the pairing if the connection is successful.

How to use the Bluetooth function:

The mobile phone must first turn on "Bluetooth", and then the mobile phone will automatically enter the Bluetooth search interface, and the Bluetooth device to be paired should also be turned on or enter the pairing and search interface, select the Bluetooth device to be paired, and select "Confirm" (or enter the password) according to the prompts to pair successfully!

Note: Whether you want to enter the password, by the Bluetooth device to be paired to decide, if the paired Bluetooth device has an input button, then the pairing of both parties can enter the same password, if you want to pair the Bluetooth device without entering the button, then check the Bluetooth device's manual, according to the manual, enter the fixed password of the Bluetooth device on the mobile phone! ）

Turn on Bluetooth Go in and tap Connect.

How to use the Bluetooth function:

After successful pairing, go to File Management to find the file you want to transfer and press and hold, and select "Bluetooth" to share.

Note: Whether you want to enter the password, by the Bluetooth device to be paired to decide, if the paired Bluetooth device has an input button, then the pairing of both parties can enter the same password, if you want to pair the Bluetooth device without entering the button, then check the Bluetooth device's manual, according to the manual, enter the fixed password of the Bluetooth device on the mobile phone! ）

How to turn on Bluetooth on vivo mobile phone: enter mobile phone settings - other networks and connections More settings - Bluetooth, turn on the switch to search for nearby related Bluetooth devices for pairing and connection.

The mobile phone should first turn on "Bluetooth" (enter the mobile phone settings - other networks and connections More settings - Bluetooth, turn on the switch), and then the mobile phone will automatically enter the Bluetooth search interface, and the Bluetooth device to be paired should also be turned on or enter the pairing and search interface, select the Bluetooth device to be paired, and select "Confirm" (or enter the password) according to the prompts to pair successfully!

Note: Whether you want to enter the password, by the Bluetooth device to be paired to decide, if the paired Bluetooth device has an input button, then the pairing of both parties can enter the same password, if you want to pair the Bluetooth device without entering the button, then check the Bluetooth device's manual, according to the manual, enter the fixed password of the Bluetooth device on the mobile phone! ）

How to use the Bluetooth function:

After the pairing is successful, go to File Management.

Find the file you want to transfer and press and hold, and choose to use "Bluetooth" to share.

Note: Whether to enter the password, by the Bluetooth device to be paired to decide, if the paired Bluetooth device has entered the Li cavity key, then the pairing of the pair of which shirt to change the spike to enter the same password, if the paired Bluetooth device does not enter the button, then check the Bluetooth device manual, according to the manual, enter the fixed password of the Bluetooth device on the mobile phone! ）

<>2, click on "Bluetooth", turn on the switch button to turn on Bluetooth, <>

3. Pair the Bluetooth you need to connect to search and disassemble the zipline, and then enter the pairing password to connect successfully.

Here's how to connect your vivo phone to Bluetooth:

1.Open the phone settings interface and select the "Bluetooth" option.

3.If you need to enter a password for matching, please enter it according to the password on the device manual.

4.Wait for the connection to be successful, after the connection is successful, a Bluetooth connected status prompt will be displayed next to the device name.

If you are connected to a Bluetooth device that is complex, such as connecting Bluetooth messenger office headphones, speakers, and other devices, you can follow the steps below:

1.Open your phone's settings, select the Bluetooth option, and turn the slide Bluetooth switch on.

2.Turn on the Bluetooth device you want to connect to and put it in matching mode.

4.If the connection fails, rematch to make sure the device is in proximity and the passcode is entered correctly.

Please note that before connecting a Bluetooth device, make sure that your device has completed the basic configuration and operations, such as installing the battery properly, plugging in an external device, etc. Also, make sure that your Bluetooth device supports connecting to your phone and follow the instructions on the manual.

The mobile phone should first turn on "Bluetooth" (enter the mobile phone settings - other networks and connection bending more settings - Bluetooth, turn on the switch), and then the mobile phone will automatically enter the Bluetooth search interface, and the Bluetooth device to be paired with the Bu Shi stuffy should also be turned on or enter the pairing, search interface, select the Bluetooth device to be paired, and select "Confirm" (or enter the password) according to the prompts to pair successfully!

Turn on Bluetooth and the connected device, and then connect according to the device name.