I started studying in May, can I pass the first level cost engineer exam?

It takes about 400-600 hours to pass the estimator exam in one go. If you are determined to pass all of this year's exams in one sitting, now is the time for you to prepare for them.

First of all, the time must be guaranteed. If you start studying in May and take the exam at the end of October, you can study for 3-4 hours a day as long as you can ensure that you have enough study time

Secondly, follow the ** learning. Don't read the textbook right away, listen to our basic intensive lectures first, so that you can lay a good foundation. The teacher can not only help you sort out the knowledge points, but also understand the key points and what the form of the questions is, so that after a round of review, the key points, difficult points, and hot spots will all be understood, and this review stage will be completed in about 50-60 days.

If you quickly remember the main points and grasp the content, then you will master about 50% at a time

On the basis of intensive lectures, we should look at the teaching materials, especially the gradual and systematic review of the scientific and systematic course types such as intensive lectures, sprints, and exercise classes.

Finally, there is practice, and the amount of questions on exam 100 is sufficient. As the saying goes, a good memory is not as good as a bad pen, and the knowledge points that are easy to be confused should be excerpted in time and the wrong questions should be recorded.

Yes, as long as you make up your mind to take the exam, you will have no problem and plan your study plan.

If you have poor self-learning ability, you can choose to enroll in online courses.

There are tutors to provide guidance, and there are examinees to discuss and communicate with each other.

Learning is not so depressing, and if you have the ability to learn by yourself, you can learn by yourself.

Cost online school recommendation: Yousen.

A cost engineer four-year rolling refers to a cost engineer examination for four years for an examination cycle, candidates' results are valid in an examination cycle, for example, candidates in the first year of the examination only pass 2, then in the next three years through the other two examination subjects can obtain a cost engineer professional qualification certificate, but if in an examination cycle (4 consecutive years), did not pass all the subject examinations, the previous test results are invalid. Personnel who have obtained a professional vocational qualification certificate for cost engineers and register for other professional subject examinations can be exempted from basic subjects. After passing the examination, the corresponding professional examination certificate uniformly printed by the human resources and social security department will be issued.

This certificate serves as the basis for adding the category of practicing profession at the time of registration. [Click to inquire about the application conditions for cost engineers].

If you want to know more details about the cost engineer, it is recommended to consult Zhong'an Jianpei, which focuses on the important and difficult content and exercises of the course, and uses micro-courses for in-depth analysis to help students use fragmented time to overcome problems and maximize learning efficiency. In view of the fact that cases are the most difficult subjects in the exam, in order to greatly improve students' ability to answer questions, special case training courses are set up to help students check and fill in the gaps and quickly improve their answering ability. According to the important and difficult content and exercises of the course, the in-depth analysis of micro-courses is used to help students use fragmented time to overcome problems and maximize learning efficiency.

Click here to access the cost engineer training and learning materials

The first-level cost engineer needs to meet certain working years and educational requirements.

The results of the first-class cost engineer examination are managed on a rolling basis for a period of 4 years, and all four examinations are passed in 4 consecutive examination years.

The results of the professional qualification examination for a cost engineer shall be implemented for a period of 4 years and the rolling management method shall be carried out in 4 consecutive examination years to obtain the professional qualification certificate of a cost engineer. Exemption from the examination results of the basic subjects is valid for 2 years.

According to the "Cost Engineer Professional Qualification Examination Implementation Measures" and "Cost Engineer Professional Qualification System Regulations", it can be seen that the results of the first-level cost engineer examination are managed on a rolling basis, and the personnel who participate in the 4 subject examinations (the level is the whole subject) must pass all the examination subjects in 4 consecutive examination years.

Those who take the 2 subject examinations (the level is exempt from 2 subjects) and meet the basic subjects of exemption must pass the corresponding examination subjects within 2 consecutive examination years in order to obtain the qualification certificate.

Those who participate in the additional professional examination can be exempted from the basic subjects and pass the corresponding examination subjects within two consecutive examination years in order to obtain the corresponding professional examination certificate.

The rolling management of the results of a cost engineer refers to all the test subjects in the effective cycle of the results, that is, qualified, do not need to pass all the examination subjects within one year, and the rolling management cycle of the results of a cost engineer is different according to the different examination levels. The first-level cost engineer examination level is divided into all subjects and two exemptions.

The rolling management cycle of the results of all subjects is 4 years, and candidates only need to pass 4 subjects in 4 consecutive examination years to pass. The rolling management period of the results of the two exemptions is 2 years, and candidates only need to pass 4 subjects in 2 consecutive examination years to pass.

Those who take the 4 subject examinations (the level is all subjects) must pass the examination subjects within 4 consecutive examination years; Those who take the examination of 2 subjects (the level is exempted from 2 subjects) must pass the examination subjects within 2 examination years; If you register for the examination of other professional subjects (the level is an additional major), you only need to take the professional subjects and pass them within 2 examination years to obtain the corresponding professional examination certificate.

The first-class cost engineer professional qualification examination is divided into 4 half-days. The examination time of "Construction Project Cost Management", "Construction Engineering Technology and Measurement" and "Construction Project Valuation" are all hours, and the examination time of "Construction Project Cost Case Analysis" is 4 hours.

Candidates who meet the registration conditions for the cost engineer professional qualification examination shall bring relevant documents and materials to the designated place for registration qualification review according to the regulations. When registering, the local human resources and social security departments, together with the relevant industry authorities, will review the qualifications of the applicants. After passing the examination, the admission ticket will be issued, and the candidates will take the examination on the specified date, time and place with the admission ticket and valid certificates.

To prepare for the exam, you must first understand the test subjects and test question types, know yourself and know your opponent, and you can survive a hundred battles; Secondly, be targeted, follow the outline, in order to get twice the result with half the effort! Finally, to do the question, do the real question. It is easy to have a low eye and a high hand, and many subjects that cost money need to strengthen memory in the problem.

Share the candidate's experience of successfully passing the cost engineer and first-class constructor in one year.

Here are a few personal feelings:

We must follow the plan, (we are all adults, socialization is essential, we must set aside time for maneuver, otherwise the plan will definitely not be completed) to manage the PDCA inside, which is also useful for us to learn, start to read, initially set a public course per month, and practice the rest of the time. During the implementation process, the public class is usually completed in about 20 days, and the practical time required is much longer than I imagined.

Usually the wrong questions should be collected, and if you look at the wrong question set every once in a while, there will often be mistakes 3 or 4 times or mistakes, so you must pay attention to it.

Regulations: In addition to memorization, it is also necessary to understand the jurisprudence. After understanding, it is not difficult to remember, the most obvious one is who is at fault and who is responsible.

Whoever defaults, bears. It's best to do exercises to consolidate every chapter you read. Practice with the 100 chapters of the exam and remember to collect the mistakes.

Take a test after one course, and do one test paper a week to keep it familiar, otherwise, after the second book is finished, the first book should also be forgotten.

Regulations: In addition to memorization, it is also necessary to understand the jurisprudence. After understanding, it is not difficult to remember, the most obvious one is who is at fault and who is responsible.

Whoever defaults, bears. It's best to do exercises to consolidate every chapter you read. Practice with the 100 chapters of the exam and remember to collect the mistakes.

Take a test after one course, and do one test paper a week to keep it familiar, otherwise, after the second book is finished, the first book should also be forgotten.

Economy: Listen to more lectures, as long as you understand the first chapter, it is very simple, as long as you remember one formula, everything else can be deduced. As with the regulations, do a set of test questions every week, otherwise the formula will be forgotten quickly.

Practice: It takes the most effort and is also the most difficult. The practice is more complicated, and the questions must be done more, and the real questions over the years have been done.

The cost learning time is too short, 20 days to get a course, and from the end of the management, every day to see the case.

Compared with the engineering economy of a construction, the valuation is more difficult, and the knowledge points of listening to measurement are too fragmented, and grasping the last chapter is half the success.

The case, because it is unpretentious, listens to Zhu Junwen, the main reason is that he will put it when he lectures.

Betting on the topic, betting on the topic is not omnipotent, it can only be icing on the cake, without a good foundation, you can't get by.

Generally speaking, if there is a foundation, half a year for a first-level constructor and half a year for a first-class cost engineer, and review for five hours a day. That's more than enough time, and I personally think it's pretty much enough. Five hours, only five hours a day, insist on a year, half a year to see the builder and half a year to see the cost engineer is completely enough.

If you plan to take the exam next year, there is still a year and a half to study carefully, and there is a lot of hope. If it's too late for the exam this year, it would be nice to pass one.

You think too much, you can live one a year, you are both NB or two.

There are a total of four examination subjects for a cost engineer, and according to the relevant regulations, only need to pass all the subjects in four consecutive examination years to be considered qualified, so there is no need to complete the examination in one year. But it's best not to take one subject every year, the cycle is too long, if there is a lack of review time, you can choose to apply for two subjects in a bad year, so that the arrangement will be more reasonable and secure.

The results of the professional qualification examination for a cost engineer shall be managed on a rolling basis for a period of 4 years. Those who take the 4 subject examinations (the level is all subjects) must pass all the subjects within 4 consecutive examination years, and those who take the 2 subject examinations (the level is exempted from 2 subjects) must pass the corresponding subjects within 2 consecutive examination years to obtain the qualification certificate.

Personnel who have obtained a professional vocational qualification certificate for a cost engineer, register for the examination of other professional subjects (the level is an additional specialty), can be exempted from the basic subjects, and pass the corresponding subjects in 2 consecutive examination years, and can obtain the corresponding professional examination certificate, which is used as the basis for increasing the professional category when registering.

Get free cost engineer learning materials and knowledge maps.

The market demand for first-class cost engineers is large, the certificate has high gold content, and the salary is very considerable, so it is still necessary to take the first-level cost engineer.

With the development of the architectural design industry in recent years, the demand for a series of construction professionals such as cost engineers has increased year by year, and the market provides cost engineers with a wide range of employment prospects and good employment opportunities.

After the cancellation of the cost engineer exam, the corresponding demand for cost engineers will increase. Those who want to change jobs and improve themselves can sign up for the first-level cost engineer examination, and after taking the first-level cost engineer qualification certificate, they will choose their ideal job in the construction industry more smoothly and achieve their higher life goals and values.

As an engineer, taking a cost engineer is everyone's goal, which is a strong proof of their own value, and the key to promotion and salary increase.

After getting the textbook, first read the table of contents carefully, so that you have a big framework in mind. Then combine the table of contents to understand the content of each chapter and section of the book, and finally read through the textbook, combined with the outline for an in-depth understanding of the textbook, to know that the focus of the first-class cost engineer exam is **.

To learn to summarize and outline, that is, for each chapter or each knowledge point, you must make an outline of the content involved in this knowledge point, and sort out your own set of systems, so that the knowledge points of the whole textbook can be strung together in the end, which is convenient for memory and understanding.

Don't do it blindly. Many candidates have not gone through the textbook once, and they start to do a lot of exercises, and find that they do not do the questions well, in fact, they do not grasp the knowledge points well. Candidates at least have to go through the textbook of the middle school entrance examination, roughly understand the basic content of the exam, and then go to the questions, and then return to consolidate the mistakes, which is the correct learning sequence.