How to clean the copper smoke pipe 5, how to clean the copper smoke pipe

Chinese Han Dynasty bronzes. In 1968, it was unearthed in the tomb of Dou Xuan, the wife of Liu Sheng, King Jing of Zhongshan, Mancheng County, Hebei Province. The body of the palace lamp is a palace maid with gilt body and sitting with both hands holding the lamp, with a quiet and elegant demeanor.

The lamp body is 48 cm high and weighs 15-85 kg. The design of the palace lamp is very ingenious, the palace maid holds the lamp in one hand, and the sleeve of the other hand seems to be blocking the wind, which is actually a rainbow pipe, which is used to absorb oil smoke, which not only prevents air pollution, but also has aesthetic value. This palace lamp was named because it was placed in the Changxin Palace of Empress Dowager Dou (Liu Sheng's grandmother).

I think it is very in line with the current concept of environmental protection and low carbon, and the oil smoke disappears along the sleeves. The sleeves have a lot of layers of pleats. The design is beautiful.

The form of the palace lamp is a stomping maid with a combed bun kneeling on the ground, holding a copper lamp. The whole palace lamp is 48 centimeters high and weighs kilograms. It is composed of 6 parts: head, right arm, body, lampshade, lamp plate and lamp holder, and the head and right arm can be assembled and disassembled, which is convenient for cleaning the lamp.

The lamp plate of the palace lamp part is divided into two parts, engraved with the inscription "Yang Xinjia", which can be rotated to adjust the direction of the light, and the arc-shaped tile-shaped copper plate embedded in the groove of the lamp plate can adjust the size of the light outlet opening to control the brightness of the light. The right hand and the drooping sleeve are placed on top of the bronze lamp. The bronze statue of the palace maid is hollow in the body, and the hollow right arm and sleeve form a copper lampshade, which can be opened and closed freely.

The burning gas dust can be deposited in the body of the palace maid through the right arm of the palace maid, and will not escape into the surrounding environment in large quantities. A small amount of waxy residue remains on the upper part of the lampshade, and it is speculated that the burning substance in the lamp is animal fat or candles. The surface of the palace lamp does not have too many decorations and complex patterns, and it is relatively simple in the court utensils of the same era.

The palace maid's body is hollow, holding a lamp in her left hand, and her right sleeve seems to be blocking the wind, which is actually a siphon that absorbs soot (black ash integrated by smoke condensation). When lit, the soot enters the body cavity through the siphon formed by its right arm, which can keep the indoor environment clean.

Let's see if you're satisfied.

Pour some salad oil on the cloth and wipe the copperware, which is very useful and shiny.

Cleaning the hard rust on the bronze body Wipe the bronze with tin foil wrapped in incense and dipped in some refined salt, and the dirt on the bronze will be removed.

There are many ways to clean filter mouthpieces, for example.

1. There is a napkin to scrub directly, and there is generally a matching needle at the micropores, just poke it directly, if there is no matching needle, you can use a general fine needle or something.

2. You can directly use the degreaser used for washing dishes, and it doesn't matter much about cleaning, but you must wipe it dry after washing, otherwise, it will be easy to rust.

3. If the time is sufficient, you can use alcohol to clean the bubble, so that it is easier to disinfect. It would be better.

The above is my personal experience of using a cigarette holder for so long, and it was also told to me by the seller I bought on **, the method is very convenient to use, her store seems to be called "Chengyu 88" or something, anyway, it's pretty good, you can consult her if you have any questions, there should be no problem.

When cleaning the seawillow cigarette holder, be careful not to soak the cigarette holder with alcohol, let alone scald it with boiling water, and try not to touch the water, because it will cause the surface of the seawillow to become pimples after absorbing water.

Answer: The normal filter cycle can clean the cigarette holder, and it should be wiped and cleaned when you smoke five or six cigarettes. If it is not cleaned for a long time, the tar on the mouthpiece will harden, causing the mouthpiece to be clogged and not breathable. And it's hard to clean up, and it can even suck tar into your mouth.

What if the tar in the cigarette holder hardens if it is not cleaned for a long time, how to clean it? Teach you a good way. First, pull out the washable parts of the cigarette holder separately, and wipe the e-liquid on it with a paper towel.

Then put the cleanable part of the wiped mouthpiece into a bowl and pour in a small amount of liquor to soak for a while. (If it is a plastic cigarette holder, you should be cautious that it will crack due to the embrittlement of the plastic after soaking in liquor).

Soak for about a few minutes, you can see the soaked tar in the bowl, at this time shake the cup a few more times with your hand to clean up the remaining hardened tar inside.

You can now see a lot of soaking tar and dregs in the bowl. Pour out the dregs and wine from the glass, then rinse with clean water.

Rinsing with water is to rinse off the remaining dregs, and the other is to prevent some of the plastic parts on the mouthpiece from becoming brittle due to long-term soaking in wine.

After rinsing, shake off the water, and then wipe dry with a dry rag and assemble it.

Use a section of hose to cover the nozzle of the cigarette holder, dip the other end into the dish soap, suck gently, and blow again to make the dish soap pass through the mouthpiece repeatedly, remove the internal e-oil, and then change the water to rinse the residual dish soap in the same way. If you don't have a metal part of your filter mouthpiece, you can also soak it in a diluted disinfectant. If there are metal parts, do not soak them, so as not to corrode.

1. It is recommended to do a simple wipe and clean after using half a pack of cigarettes, generally when you feel that smoking is tight during use, you need to clean it up when you clean it up, and pay special attention to the fact that any style of cigarette holder should be pulled out in a spiral way when pulling out, which has a great impact on the sealing effect of the protective cigarette holder; After pulling out, wipe and clean in sections, and clean the filter holes with a needle.

After soaking in warm water at about 50°C, you can also soak it in tea, you can wash it with a flexible detergent in moderation, or wash it with alcohol, but dry it as soon as possible after cleaning with alcohol.

If it has not been cleaned for a long time, it is not easy to clean up the tar hardening in the residual cigarette holder, soak it in about 50 warm water after pulling it out in sections, and wipe it after soaking for about ten minutes, or you can put a little washing product to soak it

2 If the mouthpiece part of the mouthpiece of high-grade materials needs special protection, it is generally cleaned with alcohol or brandy, but if the alcohol component is removed immediately after cleaning, it will make the plastic part of the cigarette holder brittle, so please use it with caution

3 If it is a refillable mouthpiece, the internal cleaning is very simple, because it is filtered by the filter element when used, and there is only a small amount of tar that may leak due to poor installation on the inner wall of the mouthpiece, so you only need to wipe it with a paper towel or cloth strip slightly

There is always an ultrasonic cleaning machine at home to clean most of the small objects in the home, and the cleaning effect is strong, and it is cleaned in all directions.

Use salt or baking soda to see if you need outside the cigarette and duty-free tobacco**.