Is it good to make floor glue for cars? What are the pros and cons of using automotive floor adhesiv

When I went to Laifu that day, Xiang's leather was 1800, but after reading the distinguished series, I still used the best kind. It shouldn't be expensive, the relationship between the boss and my little brother is very iron, and my little brother went to pay it back. 3000 including imported rubber are all good.

According to your situation, it is possible to lay the floor glue, but it needs to be replaced regularly. The floor glue is directly glued to the floor of the original car with 502. If it is not replaced for a long time, mold will form between the floor and the floor glue.

Affects the air inside the car. Your car often pulls workers, and it is at the starting point of caring for the vehicle, you can shop and replace it frequently.

Not very good, it is recommended to put two layers of foot pads, one velvet and one plastic. But if there are children, it may be better to do it, but it must be ***, there is no taste, and a few hundred yuan of floor glue will be counted. The quality was poor and it broke down quickly.

I am professional in the automotive decoration industry, this mainly depends on their own needs, there is no good and bad, if you yourself love to be clean, and then the car can be kept clean, it is not recommended that you shop, directly buy a set of large surrounding mats, on the contrary, you had better pave, easy to take care of, but the choice of rubber should also be cautious, to shop to pave ***, not just cheap, there are a lot of bad quality, paved will not be rotten in a long time, and the smell of inferior quality is relatively large, Hope it helps! If necessary, you can continue to ask questions...

The advantage is that it can play a role in sound insulation and facilitate the cleaning of the car, and the disadvantage is that if the quality is not good, the air in the car will not be very good, and it will affect the comfort of the driver and passengers. Automobile floor glue refers to a layer of automotive interior products that are laid on the bottom panel after the new car is bought back to protect the hygiene and cleanliness of the car.

Function: 1. Prevent liquid from polluting the ground hygiene in the car, such as cement sand and gravel brought in by shoes after rain. Although there are foot mats to place, in the actual use process, because the water will splash, it will inevitably make the ground flannel dirty, and it will be troublesome to clean.

If it rains continuously or if you buy fish and shrimp in the back row, the bag is leaking, etc., it is very likely that the pollution is very difficult to clean, and long-term pollution will also produce peculiar smells, which will be difficult to disperse all day long. Therefore, the whole car floor glue solves this problem very conveniently, in fact, the material is artificial leather. After contamination, it can be quickly removed by simply washing it with a damp cloth.

2. Chassis noise blocking. It can effectively prevent the noise of the automobile chassis and tires from entering the cockpit. Because artificial leather is more sound-absorbing. See for yourself. Especially the whole car floor glue, the effect is better.

The difference between ordinary plastic mats: Compared with ordinary plastic mats, although ordinary plastic mats are easy to lay and have certain protection for wool pads, the edges are still easy to enter the dust, and protection cannot be provided under the driver's seat. In addition, the simple floor mats will also move around the bottom of the car.

Floor glue does not have the above shortcomings, it is a good way to "escape" once and for all, and the normal service life is generally 5-6 years or more (the relative cost is not high).

What the hell is car floor glue? Is it necessary to stick? If you don't know these routines, you're at a loss.

When I first saw this problem, I was a little confused, what is the floor glue? Forgive me first before I went to my mother's mother. It turns out that the floor glue is a layer of PU material protective pad on the floor of the vehicle (let's say so), which can make people feel that the floor of the car is softer, and at the same time can effectively reduce the noise, which looks good.

But I asked my friends around me, and I didn't seem to know much about this thing, and at the same time, I asked the 4S store I knew that it was not recommended to install this. Why? First of all, to install the floor glue to remove all the seats, the project is relatively large, and the 4S shop is too lazy to do this thankless work.

Secondly, there is no unified standard for the glue thing, and it is indeed very different, and basically 4S stores are not recommended.

With the understanding of the floor glue, I personally recommend that you do not stick this thing. The key is to pollute the air, because glue will be used for glue, and no matter how environmentally friendly glue is, there are volatiles, plus the formaldehyde of the new car, this smell is really enough. No matter how much you buy charcoal packets and good car air purifiers, it will be difficult to purify the air in the car.

In addition, there is a problem with specifications, to be honest, the 4S store refuses to post it, and we are not at ease when handed over to the outside. At the same time, although it feels soft under the feet, God knows what they use, what if it is easy to burn? What if the material is not up to standard?

At least there is a national standard for fuel additives, and it is better not to use things without standards.

To tell the truth, the glue gives people the feeling that the advantages outweigh the disadvantages, although quiet but if something goes wrong with the vehicle, you may not feel it, although the foot is comfortable, but the glue pollution in the car environment will also affect health, so buy a car don't toss blindly, buy what should be bought, don't buy anything that shouldn't be bought, otherwise this is the legendary excessive car maintenance!

Some models of the original car will be covered with a layer of automotive floor glue, so unless the floor glue on your car has aged, damaged and other problems, it is not necessary to pave the floor. However, most models do not have the original floor glue, so should we shop it, is it good to pave the floor glue?

First of all, the benefits of laying car floor glue are obvious, one can make the car better and cleaner, the car floor glue itself is not expensive, it does not cost much to shop once, and it can also reduce chassis noise to a certain extent. However, its shortcomings are also noteworthy, most of the materials used in the car floor glue are relatively poor, the release of formaldehyde and other harmful gases to people is inevitable, and the use of car floor glue is not conducive to the volatilization of carpet moisture, which is likely to lead to mold and even rust of the carpet under the floor glue.

Now it has long been eliminated, and there is no benefit.

The major of auto repair mainly focuses on mechanical design, mechanical testing, mechanical manufacturing technology, mechanical design, metal technology, electrical principles, engineering graphics, electronic technology, automobile introduction, automobile structure, automotive electronic and electrical equipment, automobile inspection and maintenance, automobile service, automobile application, automobile beauty, engine principle and automobile theory. Employment direction: suitable for automobile inspection and maintenance, automobile insurance, automobile driving, automobile marketing, and can also be engaged in the operation and management of automobile-related industries.

What do you study in auto repair?

Public courses: Advanced Mathematics, English, Fundamentals of Computer Applications, Principles and Applications of Microcomputers, Political Economy, etc.

Major courses: Mechanical Design, Mechanical Testing, Mechanical Manufacturing Technology, Mechanical Design, Metal Technology, Electrical Principles, Engineering Graphics, Electronic Technology, Introduction to Automobile, Automobile Structure, Automotive Electronic and Electrical Equipment, Automobile Inspection and Maintenance, Automobile Service, Automobile Application, Automobile Beauty, Engine Principles and Automobile Theory, Automobile Design, Automobile Testing and Fault Diagnosis Technology, Automobile Maintenance Technology and Equipment, Automobile Engine Electronic Control Technology, Automotive Electrical Appliances and Circuits, Automobile Marketing Management, etc. (It should be noted that the setting of professional courses, especially major courses, will be adjusted accordingly by different schools.)

Elective Courses: Depends on the courses offered by the school.

Training objectives: to cultivate moral, intellectual and physical development, to meet the needs of social and economic development, with good professional ethics, understand the principle and structural composition of automobile engines, master certain electrical and electronic theory and technical knowledge, automotive electronic control technology and traffic regulations, automobile fault diagnosis, testing, maintenance and other theories and technical knowledge, with a certain degree of public communication ability and business development ability of intermediate technical personnel.

Automobile maintenance is to meet the needs of social development, with the development of Chinese society, the increase in the number of cars, the lack of automobile maintenance personnel, the need for a group, professional, high-quality maintenance personnel. As one of the key points of the talent training project implemented by the Ministry of Education, automobile maintenance has a national demand of more than 300,000 talents. This major cultivates the basic knowledge of automobiles to adapt to the development of the modern automobile industry, master the basic knowledge of automobiles in many aspects such as automobile structure and principle, automotive electrical equipment, automobile testing equipment use, automobile fault diagnosis, etc., proficient in the use of various automobile testing equipment and the testing process of the whole vehicle, have high operational skills and technical guidance technician level in automobile testing specialty, and have a certain advanced knowledge and skills of automobile repair enterprise management.

It is very likely that today's new cars do not use floor glue much, but the floor glue used to be very fashionable. Floor glue is a similar layer of floor mat that is placed under the seat of the vehicle. After laying the floor glue, it can also easily remove the stains in the car, and at the same time, it also reduces the blind spot of the car.

Even some manufacturers claim that the floor rubber can improve the sound insulation of the car suspension, naturally, reasonable people understand, it is what it says, and we just listen to it. After that, the rubber has been used for a long time, and many car buyers have complained, and the defects of the rubber have gradually emerged

1. The quality of the rubber products is uneven, if the fake and shoddy rubber products are paved, harmful substances will be released in the whole process of application, which will immediately endanger the physical and mental health of passengers in the car.

2. The rubber will block the evaporation of the water of the carpet, when the wet and cold gas or precipitation on a rainy day in summer is brought to the car and infiltrates the bottom of the rubber, it is very easy to create the mold of the carpet under the rubber and release the smell, and even the more serious will rust the car body and car chassis.

3. All the seats in the car must be disassembled, and the bill of quantities is huge, and it will not be removed once it is paved.

1. As mentioned before, all the seats in the car should be removed to install the floor glue, and all the seats in the car should be removed to remove the floor glue.

2. If the floor glue is no longer needed, you can use a special tool to break the floor glue into many small pieces, and then gently pull the floor glue off.

3. After the floor glue is completely removed, it is best to clean the carpet with a car vacuum cleaner.

The advantage of using floor glue is that it is easy to clean. When getting on and off the bus, the shoes will be stained with mud, and there will be mud and water on rainy and snowy days, which can easily win the carpet in the car, and it is also very troublesome to clean up. If you put on the floor glue, you can wipe the car clean with just a rag.

Floor glue needs to remove the door side pressure plate, because the original design is no floor glue, after laying the floor glue is equivalent to increasing the thickness of the carpet, the door side pressure plate is not tightly covered, easy to loosen, and sometimes it will bounce up by itself.

In addition, moisture is not easy to volatilize, and if water enters the car, it is easy to cause damage to the carpet.

New car still.

Don't do it! Do it now.

Floor glue is not very popular anymore, that thing will smell first, there will be the possibility of mold in it for a long time, it is recommended not to, usually the vacuum cleaner can be cleaned when washing the car.

It is necessary. A layer of carpet-like items under the seats of a car. After laying the floor glue, it is easy to clean the dirt in the car, and at the same time, it also reduces the dead angle of the vehicle to hide dirt and dirt.

As the name suggests, shock absorbing rubber is a kind of rubber product, which is used to prevent or reduce various vibrations and noises generated by the car during driving. Install this.

Automobile floor rubber has the effect of preventing liquid pollution, ground hygiene in the car and chassis noise blocking. Car floor glue can prevent liquids from contaminating the floor hygiene of the car, such as cement and gravel brought in by shoes after rain. Although there are foot mats to prevent it, in the actual use process, because the water will splash, it is inevitable that the floor velvet will be dirty.

It's a hassle to clean. If it rains continuously. Or you buy fish and shrimp to put in the back row, the bag is leaking, etc.

It is very likely that after contamination, it is very difficult to clean, and long-term pollution will also produce peculiar smells, which are difficult to disperse all day long. Therefore, the whole car floor glue is very convenient to solve this problem, in fact, the material is artificial leather. After contamination, it can be quickly removed by simply washing it with a damp cloth.

It can block chassis noise, which can effectively prevent car chassis and tire noise from entering the cockpit. Because artificial leather is more sound-absorbing. See for yourself.

Especially the whole car floor glue, the effect is better.

Wash the car to ensure that there is no debris in the working area;

2. Disassembling the car seat;

3. Clean the car thoroughly to ensure that the sensitive lead floor is clean and dust-free;

4. Pay attention to every part of the paved floor, which can be improved;

5, installed in the original car seat;

6. The goods belong to the owner;

7. Clean the body and interior of the car.

It is better to use some soundproof cotton for car floor glue, and the quality is relatively strong and wear-resistant, and it also has a soundproof effect for the sound from the car.

Automobile floor glue refers to the Huiyin automotive interior products that are laid on the bottom panel after the new car is bought back to protect the hygiene and cleanliness of the car. According to the production process, it is divided into: one-time molding automobile floor rubber and hand-sewn automobile floor rubber.

The material is different, the workmanship is different, generally there are PVC, PU bridge Bihao, imitation microfiber, microfiber leather and other materials. The main function of floor glue is to keep the interior of the car clean and beautiful.