How to make up for a small hole in the car glass by stones?

If you don't show the paint, it is recommended not to make up for it for the time being.

It is possible that the car you just bought is more distressed and more concerned, but after you drive for a while, you will not bother to care even if you wipe off a small piece.

You can go to a car detailing shop to fix it. The maintenance of automobile glass is mainly to fill the cracks with liquid gum and eliminate the gaps. The material used to fill the glass is a highly transparent liquid gum, which relies on ultraviolet light.

Heating can quickly solidify, and the strength can reach more than 90% of the original glass.

Glass. It is necessary to repair the damage as soon as possible, because during the driving process, the windshield not only bears the wind resistance, but also constantly vibrates, and after a long time, the original small crack may become a large crack unconsciously. At this time, the glass repair is also helpless, can only replace the whole glass, if the owner has not been on a separate glass insurance, it is a little embarrassing.

The operation of glass repair is also not complicated, mainly filling the cracks with liquid gum and eliminating the gaps. The material used to fill the glass is a highly transparent liquid gum, which is heated by ultraviolet light and solidifies quickly, so as to achieve the purpose of repair.

The principle of windshield repair is to use repair tools to inject repair fluid into cracks or pits, and after the repair fluid is filled and solidified, it can cover the damage, avoid cracking, and play a role in repair. It should be noted that if there are cracks or pits in the glass, it needs to be treated as soon as possible, and those that can be repaired should be repaired as soon as possible, and those that need to be replaced should be replaced in time.

The treatment method of a small white pit collapsed by a small stone on the front windshield of the car is as follows:

The specific steps are as follows:

First of all, check the location of the breakage and the degree of damage.

2.Clean the patched area and try not to clean it with detergent or tap water.

3.Then use a blade to scrape off the fragments in the broken part to make the glass as flat as possible.

1. Replace the mark at the position where the glass needs to be repaired. 2. Install the suction cup device at the damaged windshield. 3. Install a funnel on the suction cup.

4. Punch the adhesive into the funnel. 5. Install the vacuum pump and vacuum. 6. Assemble the repair device and use the blade to scrape the glass.

The material used to fill the glass is a liquid gum with high transparency, which can be quickly solidified by ultraviolet heat and the strength can reach more than 90% of the original glass

First of all, let's understand the composition of automotive glass. The front windshield of a car is generally laminated glass. Laminated glass is made of two layers of glass with a gelatinous film attached to the middle to ensure that after being damaged by an object, it will not completely crack, fall off and collapse, and ensure the safety of personnel.

It doesn't matter if you use a dilapidated car, replace it with a new one.

It's just a small white pit, no more minding.

The windshield of the car was hit by a hole in the stone, and some cases could be repaired and some could not. For example, a coin with a damaged area of less than 1 yuan, with a distance of more than 6cm from the frame of the car, does not break through the glass but only has a small pit on the surface, and cannot be damaged in the position of the main visual area.

If the above three conditions are met, it can be repaired, and there is no need to replace the windshield with a new one, and if the crack in the smashed place is cracked, this situation cannot be repaired.

Minor smashing. If it is only a minor injury, it should be repaired in time, because the crack of the windshield will slowly spread longer and longer, resulting in the windshield damage becoming more and more serious and cannot be repaired, and it is necessary to replace the windshield with a new one.

Generally, the repaired windshield can hardly be seen as a trace of repair, and there is no difference from the new windshield, and it will never crack after repair, but its strength can only reach about 90% of the original glass.

Leave it alone. Yours has no cracks yet, if there are cracks, you need to repair the glass, yours is lighter, don't care. Thank you.

Hello, the front windshield of the car was crumbled by a small pit by the stones, don't worry about him. If your car has purchased glass insurance, the date of manufacture of the heart glass does not match the nameplate of the vehicle. Secondly. This will result in an increase in the insurance for the second year.

This small pit, if there is no crack next to it, it will affect the appearance and affect the line of sight! For driving safety, you can go to a professional car repair shop for repairs! Since the front windshield of the car is tempered glass, it is safer to repair the glass, temper it, and paste the tempered film!

It is understood that if there are cracks in the front windshield, don't go on the highway, because the glass is easy to break, so I think it's better to deal with it as soon as possible, so it's safe.

No matter, or you'll have to get a new one.

Such a little pit doesn't affect anything, you can leave it alone.

The front windshield of the car was smashed by a small pit by stones at high speed, which can be repaired by glass repair agent, and the specific operation steps of using this repair agent are as follows:

1. Replace the mark at the position where the glass needs to be repaired.

2. Install the suction cup device at the damaged windshield.

3. Install a funnel on the suction cup.

4. Punch the adhesive into the funnel.

5. Install the vacuum pump.

Vacuuming. <>

6. Assemble the repair device and use the blade to scrape the glass surface to complete the repair.

If there is a small pit in the door that is hit by stones, you can go to the sheet metal repair, and then the paint repair can be carried out. Sheet metal repair can repair the location of deformed places. When painting and sheet metal, be sure to go to a professional store to find a professional to operate.

Be sure not to be greedy for cheap and go to some unprofessional institutions to carry out repairs.

Sheet metal is the best solution to repair the small pits in the door and the potholes on the outside of the car, of course, there is also a project after the sheet metal, that is, painting, because after the sheet metal operation, the metal surface of the car will cause the wear and peeling of the paint due to the operation of the tool, so after the rice gold project, the sunken door plate surface becomes smooth, and the door should also be painted to restore the beauty.