How do you want to punch a hole in glass?

In our life, many people will use glass when decorating, so in the process of installing glass, there will also be a need to punch holes, which is a certain method and skill, and then I will introduce it to you.

First of all, we must know that the thickness of the glass is still relatively large, so when punching holes in the glass, we must use a special machine, so as to ensure a reasonable passage through the glass, so as not to damage other parts of the glass. In addition, in the process of perforating the glass, we must choose according to the quality of the glass, if the quality of the glass is fragile, it is not recommended to perforate, because it is likely to cause the glass to break. The second is that we must pay attention to the position of the hole when punching, we use a marker pen to mark in advance, so that it can also be carried out according to this mark when punching, and also according to the indication of the hole to the fixed thickness of the hole, and then according to the requirements of the size of the processing to punch, after the hole must be processed, but also the glass hole needs to be edging and chamfering, otherwise it is likely to cause the glass chips on the glass to enter our **, Thus causing some damage to our body.

It can be seen that it is still a difficult task to punch holes in the glass, because many young friends will choose glass doors when decorating the bathroom, and at this time they need to punch holes in the glass, so as to install the upper row of curtains, so that the glass door can be used well.

Finally, I want to say that if you want to buy some glass doors or other glass supplies, try to choose a better material at this time, because there are many glass materials that are not the same, if you buy cheap glass, then it is very likely that we will not be able to withstand the high temperature when taking a bath, so that there will be an explosion, which is quite harmful to our body.

There are many products around me that are made of glass, and the glass will be made into different shapes, and some need to be punched on it, what is the specific punching method?

1. How to operate the perforation on the glass.

1. If you want to punch holes in the glass, you need to use a glass drill bit and prepare the tools for punching. Then in the process of punching, while watering and drilling, but not too much water, as long as there is smoke to be able to water, and then continue to punch.

2. You can choose a hand drill, first to determine the location of the hole, the choice of drill bit is also more particular, generally speaking, the choice is a hollow drill bit, so that the ability to drill will be stronger. Place a mat at the identified location, drill a mark with a hand drill, and then take the mat. Drill a small hole in such a position, water it as you go, and then polish the hole until it meets your requirements.

3. It can also be operated by a punching machine, and drilled by professional masters. Coupled with water cooling, it is easy to break, and the requirements for punching are relatively high. Through the punching machine to punch holes, its hole size can be effectively controlled, and the accuracy is relatively high, and there will be no wear.

2. What are the types of glass?

1. Flat glass, that is, the most common type of glass. It is mainly used in doors and windows, playing the role of light transmission, heat preservation and wind blocking, generally speaking, colorless, good transparency, and large and small thickness.

2. Patterned glass, also known as patterned glass, is generally used in the design of doors and windows, such as the toilet door of the bathroom.

3. Insulating glass.

It is more common, it is composed of two or more layers of glass, sealed with a sealing strip around the perimeter, filled with dry gas, which can play a sound insulation effect.

Laser perforation of glass produces glass holes with well-defined geometries. Drilling glass holes with well-defined geometries is becoming increasingly important in a wide range of industries. Glass laser drilling machines are replacing traditional drilling processes to support many applications.

Depending on the application, a variety of lasers can be used for laser precision drilling or laser cutting of round holes. In 2016, Kolode Laser Jixiangyun Technology Co., Ltd. successfully developed a high-speed connection laser perforation equipment, and at present, the field of photovoltaic glass laser perforation has covered about 70% of the market share, and the sales volume will be 100 million yuan in 2021. Kolode laser machines contribute to the productivity of the glass industry.

It is more convenient to choose to tape all around the perimeter of the glass and then use something more advantageous to knock the fight, and it will also avoid changes in the surrounding glass.

You can use a special electric drill to punch holes in the glass, or you can use a glass knife that specializes in cutting glass, and the efficiency is relatively high.

Holes can be drilled using specialized equipment, either by marking the location of the hole in advance, by using an electric drill, or by knowing the status of the hole.

For many people, when decorating their homes, they can want to punch holes in their own glass to install things, which is very common in our ordinary life. Not only that, for punching, if we don't pay attention to it, it is easy to cause some substantial damage on the glass, which will affect the beauty of our furniture. Many people will ask the decoration master whether their furniture can be punched before punching, in fact, for the decoration master they have certain skills in punching holes in the glass, today I will teach you how to avoid damaging the glass when punching.

Method 1: First of all, we need toothpaste and a melted container, and we also need to choose some small amount of cement, and we need to prepare these tools and then punch the holes. This simple method is that we don't need to use a drill or any other machine, we just need to lay our glass flat and then pad something underneath. Then we mix it with cement and water and put it where we want to drill the hole, and after making the middle into a funnel shape, we have to measure that the hole we make is equal to the bottom of our funnel hole.

At this time, you pour our molten metal solution into our finished hole, and then it will melt into the hole we want along the shape of the hole.

Method 2 The second method is also relatively simple, we only need to make our drill bit into a round sleeve according to the size of our drilling, but in the process of doing it, we need to leave a little seam, so that the drill bit can be directly punched on our manual drill. Because for the drill bit, the damage to the glass is very large, if we directly use the drill bit to punch holes, it is easy to cause our glass to be damaged. If a drill bit cover is attached to the front of the drill bit, friction can be reduced, and holes can be drilled to prevent glass breakage.

Note: We need to check our equipment in the process of punching, if we are sure that our glass can drill gray and white foam, it means that we can start drilling, at this time we can drill through the thicker glass several times. When we are drilling, if the round knot pen and drill bit on the hand drill move, we need to repair it in time.

First of all, you should use some particularly fast machines, and secondly, you must pay more attention when punching, you must be fast and accurate, and the orientation must be correct, as long as this will not destroy the glass.

We need to choose relevant tools when drilling glass, for example, we can use glass drills, glass knives and other related tools to punch holes. In the process of punching, the speed should be slow, the force should be light, especially when the glass is about to be drilled, the force should be weakened. In general, the thinner the glass, the lighter the drilling force, and if the glass is drilled through quickly, it is easy to have the problem of drilling and exploding.

I think that at this time, we should go to a professional person to punch holes, because this operation is particularly difficult, and ordinary people can't operate it. Broken glass.

Only choose a professional grinder for punching, so that it can be effectively avoided, and you must pay attention to the strength, which is very important.

There are still many ways to punch holes in toolless glass, and here is one of them:

First, here is a demonstration of a small hole in the beer bottle, here to prepare two long iron nails, or two other metal strips.

2. Stretch an iron nail into the bottle, and the nail cap is against the hole that needs to be opened, and give the iron nail beaten on it a focus point.

3. Then fix the iron nail in the bottle with one hand, and gently hit the top part of the inner iron nail with another iron nail with the other hand.

Fourth, the force must not be too strong in the process of beating, and the place where the iron nail in the bottle is broken by slowly beating.

Fifth, the following figure is the completion effect of the opening, and one of the drawbacks of using this method is that the opening cannot be guaranteed to be smooth.

Introduction: Glass is becoming more and more important in life, because glass is used in many daily life, such as glass sliding doors, glass cabinets, glass windows. Many times when installing these products, it is necessary to punch holes in the glass.

And there are a lot of holes in the glass. So what are the best ways to punch holes in glass? <>

First of all, the reason for punching holes is that it can be installed better, for example, like a glass doorSliding doorsBe sure to punch holes, because there are some on itScrewsIt is fixed to prevent the glass from falling and causing danger. Glass is not better than metal or the like, because it is weighty, so it must be fixed on the glass to prevent the danger of falling off, glass is a fragile item, so everyone also pays special attention. <>

First of all, it is necessary to mark the hole with a fixed thickness according to the indication on the hole, and then determine whether the glass can be punched according to the requirements of size processing, and the edging and chamfering need to be done after the treatment.

Perform a punch. Then according to the requirements, then use a glass drill to install the things to. First of all, when installing, you should draw the correct position, and then remove the water on the cloth, then cut it with a glass knife and knock it through, and then cut it with a glass cutting saw, and then cut it diagonally, not directly.

To punch the hole first, place the glass bottle on the punching platform. It is best to use a carbon pen to mark the exact location of the hole, because the glass must be accurate enough to be correct, and the hole should be drilled after the mark is made to make sure that there are no errors. Add a certain amount of water to the circle next to it, the purpose of adding water is to make the glass burst when drilling.

And when punching, we must grasp the strength, the smaller the force of ultra-thin glass, the greater the force of thick glass, so punching is a very technical content, we must pay attention to relevant matters to prevent danger when punching.

First of all, we need to buy a professional drill bit, and then install the purchased special drill bit on the hand drill, draw marks on the position of the glass that needs to be punched, hold the drill, turn on the switch, and make the drill bit at a 45-degree angle to the glass plane.

It can be drilled with an electric drill, or it can be punched with a grinder, and it can also be punched with a will, and it can be punched with a professional instrument, and it can also be punched with a grinder.

You can use a drill bit to punch holes, or use a hand crank way to punch holes, or you can fix the drill bit, or you can slowly rotate the drill bit, you can mark it with a marker line, and then drill the hole.

Glass is inseparable everywhere in life, and the application of glass is also diverse. For example, insulating glass or laminated glass will be installed in ordinary homes, and glass can also be used as decorations, and some decorations may need to be perforated in the glass.

Tips on how to punch holes in glass.

Preparation tool: Old toothpaste skin.

One or two sticks (depending on the size of the hole), one melted vessel, and a small amount of refractory mud.

Process: 1. Place the glass plate horizontally and add material underneath it.

2. Mix the refractory mud with water, pile it on the drilling position, make a funnel shape in the middle, and the bottom of the funnel hole is equal to the diameter of the hole to be drilled.

3. Cut the old teeth and green skins into pieces, and put them in a melting vessel to heat and melt.

4. The molten metal solution is quickly poured into the funnel-shaped mud pit, and the glass of the perforated part melts down due to high temperature, so that the required hole is formed.

When the glass is drilled through quickly, you must be careful about the feed speed, too fast may cause the hole edge chipping. After drilling, the glass shards are removed from the glass drill and the next drilling hole begins.