Located in the south, you need to pay attention to moisture, what should you pay attention to when d

Because the winter weather in southern cities is relatively humid, it is easy to develop mold. Well, in order to ensure that the construction of the house in the winter decoration goes smoothly, there are no quality problems. When decorating and decorating in winter, you should pay special attention to the following matters.

Precautions for winter decoration in the south: Moisture-proof treatmentIn order to avoid the phenomenon of dampness in the decoration materials, it is best to place the decoration materials purchased back in a high place and do not place them on the ground, because only by keeping the building materials at a certain distance from the ground can they be well insulated from moisture and moisture. However, when using, we can also brush the surface of the building material with a layer of moisture-resistant substance.

Precautions for winter decoration in the south: Anti-mildew treatment of the materialBecause the winter decoration, the weather is relatively humid, which leads to the mildew phenomenon of some building materials, so in order to prevent this phenomenon from happening, the quality of the building materials we buy must be excellent. If you are buying wood, it is best to buy wood like camphor, pine, oak, etc.

Of course, in addition to wood, we can also buy plastic building materials.

Precautions for winter decoration in the south: Scrape putty treatmentWhen decorating the home, painting the wall is essential, and there is another process in front of the painting wall, that is, scraping putty. In the winter of southern cities, the putty should not be scraped too thickly, mainly thin, otherwise the putty will be solidified or pulverized due to the special climate of winter.

Precautions for winter decoration in the south: Indoor ventilationAlthough the climate will be colder in winter, remember not to close the doors and windows during construction, because it is easy to cause indoor air pollution poisoning, especially when painting the waterproof layer, pasting tiles with adhesive products, and brushing the wall cabinet with paint, a large amount of formaldehyde harmful to the human body will be produced in the air. Benzene and other substances, and this kind of substances can only be played by opening the window to ventilate, otherwise it will only be deposited in the indoor air, so we not only have to open the window for ventilation during the decoration process, but also open the window for ventilation after the decoration is completed to ensure that the indoor air remains flowing.

When decorating, all walls should be painted with waterproof, so that they can effectively prevent moisture.

In order to avoid the phenomenon of dampness in the decoration materials, it is best to place the decoration materials purchased back in a high place and do not place them on the ground, because only by keeping the building materials at a certain distance from the ground can they be well insulated from moisture and moisture.

1.Pay attention to the amount of moisture contained in the wall and use appropriate putty powder. 2.Because it is wet, it is better to use tiles for the floor. 3.Metal or stainless steel ceilings can be used.

First of all, the wall should be moisture-proof and scrubbed. Then try to choose tiles, not the floor, the floor is easy to warp after moisture. It can also be made of a suspended ceiling, which is beautiful and moisture-proof.

When decorating a house, the most feared loss is that you do not take moisture-proof measures. I have renovated the house several times, the first time I renovated it was a first-floor house, and I suffered the loss of not doing a good job of moisture-proof, which led to mold everywhere in the house, and then I studied it myself, only to find that when I renovated the house, there were so many places that needed to be paid attention to moisture-proof.

The following are the top priorities for waterproof and leak-proof.

1.Exterior walls and roofs are waterproof

Waterproofing of exterior walls and roofs is one of the most important moisture-proof measures in decorating a house. If the waterproofing is not done well, it will lead to a large area of wall hollowing and paint peeling off, even when it rains. There is a possibility of water seepage, dripping on the head, and the house leak happens to rain overnight, so everyone should not want to encounter it, right?

The waterproofing of walls and roofs should be paid attention toThe joints between the beams and the walls are the hardest hit by water leakage. In addition to this, there are also places that need to be paid attention to are the screw holes and drains of the air conditioner hanging up on the exterior wall. The reason why someone's wall root leaks is often caused by dripping water from the air conditioner's external unit, after all, the water droplets wear through the stone, and no external wall waterproof can prevent dripping erosion year after year.

So be on guard as well.

2.Bathroom

Waterproofing of the bathroom is mainly to prevent water from the wet area of the bathroom from seeping into the adjacent rooms from the walls or floor. At present, the bathroom is more popular for dry and wet separationBefore the bathroom is waterproofed, the ground and the wall must be leveled first, so that the waterproof material can be more evenly adsorbed on the construction surface, if it is not smooth, it may leave microscopic gaps, resulting in water leakage in the later stage, which makes it more expensive to rework at a later stage. It is best to achieve a height of 40cm for bathroom waterproofing, and workers should be supervisedDo a good job of waterproofing and leakage prevention at the joints between sewers and water pipes and construction surfaces, so that 99% of the problems can be eliminated.

3.Kitchen

The kitchen has a moisture-proof black spot that many people will miss, and that's itThe seams of the handwashing stations, and the seams of the gas stove and the cooktop. Many all-inclusive decoration companies choose very poor waterproof adhesive, basically one or two years will produce leakage, mildew and other serious phenomena. If we can, we can buy excellent waterproofing glue ourselves, for example:Toshiba waterproof and anti-mildew glue from Japan, or general-purpose waterproof glue from the United States.

My house has been used for 11 years, and there is no mold or water leakage at all. In addition to the waterproof glue ballast cover staring,It is also necessary to pay attention to the waterproofing of the sewer, and it is best to choose a rigid PVC pipe as the material of the sewer. In this way, it is a good way to prevent water leakage from happening.

The above is my experience in decorating the house with moisture, as long as the place is done well, you will not encounter the problem of dampness for a lifetime.

When decorating your house, you can take the following measures to prevent moisture:

Do a good job of waterproofing:Before renovation, waterproof walls, floors, ceilings, etc., and use materials such as waterproof paint or waterproof membrane to prevent moisture penetration.

Installing an exhaust fan:Install exhaust fans in kitchens, bathrooms and other places that are prone to humidity to remove indoor moisture in time and maintain air circulation.

Choose a moisture-proof material:When decorating, choose materials with good moisture-proof performance, such as moisture-proof wood boards, moisture-proof gypsum boards, etc., to reduce the damage of damp accompaniment to decoration materials.

Enhanced ventilation:Strengthen ventilation in the room to maintain air circulation and reduce the accumulation of moisture in the indoor reed section.

Install the dehumidifier:In the humid season or humid area, a dehumidifier can be installed to remove the indoor moisture in time and keep the room dry.

Regular cleaning:Clean the floor, walls, furniture, etc. regularly to keep the room dry and clean, and reduce the humid environment.

Pay attention to the maintenance of celery:In the process of use, pay attention to the maintenance of furniture, flooring and other decoration materials, and repair the damaged parts in time to maintain their moisture-proof performance.

1. Keep ventilation. When decorating, indoor ventilation and lighting should be fully considered. Bathrooms, kitchens, basements and other places that are prone to dampness and mildew are best to open windows or install independent ventilation systems.

2. Keep it dry at all times. Dr. Nelson, a plant pathologist at North Dakota State University in the United States, says that "a lot of mold can appear in stagnant water areas within 24 hours," so when washing, bathing, or cooking, open the nearest window to maintain ventilation and avoid moisture build-up.

After bathing, you can use a fan to dry the floor. A long towel can be laid under the counter to wipe down the water at any time.

3. Use dehumidification products. Granular chemical dehumidifiers have both insect repellent and aromatic effects, and are suitable for confined small spaces, such as wardrobes, and it is recommended to choose a reusable type. Charcoal and bamboo charcoal can absorb moisture and deodorize, suitable for small areas, and need to be replaced every 3 to 6 months.

4. People who like to drink tea can also put dried tea leaves into gauze bags and scatter them everywhere, which can not only remove the musty smell, but also make the clothes exude a burst of fragrance. The coffee grounds left over from brewing coffee have the dual effect of moisture absorption and deodorization. The spring moisture-proof tip is simple: dry the coffee grounds in the sun and tie them tightly in a clean gauze bag or old socks to turn them into a simple dehumidification bag.

It is said to have a better dehumidifying effect than tea.

5. The dehumidification function of the air conditioner can also be used, and you can also choose to use a temperature 5 35 low-temperature dehumidifier, which can also be used to air dry clothes, killing two birds with one stone.

1 Intermittent ventilation method. Close windows and doors facing south or southeast, i.e. upwind, and open only downwind doors and windows to reduce moisture inlet. When the weather is clear, open all doors and windows to speed up water evaporation.

However, the air humidity outside at noon is at the highest value, and it is not advisable to open the window, which should be adjusted in the afternoon or evening, when the climate is relatively dry. 2 Lime moisture absorption method. Lime is a good and simple adsorbent, 1 kg of quicklime can absorb about 0 3 kg of moisture in the air, you can wrap quicklime in cloth or sack and place it in various places in the room to keep the indoor air dry.

3 Indoor heating method. Burn a charcoal fire or put a stove in the moisture return room to raise the temperature in the room so that the water vapor cannot condense, thereby reducing the humidity in the room. Attention must be paid to ventilation in this move, otherwise the consequences will be serious.

4 Air conditioning dehumidification method. Although this is possible, it is better to use less in order to save energy. 5 Electrical Appliance Moisture-proof Method.

The color TV can always be in standby mode, and it can also use a hair dryer to blow out the dust and moisture in the machine through the small holes in the back of the machine. It is best not to place the washing machine in a place with high moisture density such as the bathroom, and the position of the washing machine should be raised; Although the air conditioner has a dehumidifying function, it should also be turned on irregularly to keep it in good condition on humid days; The computer should especially be moisture-proof, the best practice is to turn on the machine often, it is best to open it for an hour a day to keep it dry, and the computer that is not used frequently should also open the case and paste a few packs of desiccant in food bags on the inner wall. 6. Some moisture-proof objects can be used to prevent moisture. For example, the humidity absorption box, the more common moisture-absorbing products on the market, generally consists of calcium chloride particles as the main content, and most of them also add flavor ingredients, which can integrate the functions of dehumidification, aromatherapy, mildew, deodorization, etc., and are mostly used in wardrobes and shoe cabinets; The moisture-absorbing bag, the principle is similar to the moisture-absorbing box, mostly used to seal the space, the content is mainly water-absorbing resin, after absorbing water, it becomes jelly-like, not easy to disperse into pieces, can be widely used in clothing, electrical appliances, etc.

Supermarkets have desiccant to sell, or dehumidifiers, especially leather sofas and wallpaper in the home, you can put desiccant or cotton yarn wrapped in charcoal in the wardrobe, usually turn on the air conditioner, try to keep the room dry.

If it is the rainy season and the weather is already humid, put some desiccant in the kitchen and toilet.

Third, choose the oldest method and burn some charcoal indoors to drive away the moisture.

Moisture-proof is a major thing that must be taken into account in the decoration, some people have been confusing moisture-proof and waterproof, in fact, moisture-proof is to prevent moisture (that is, water vapor), and the purpose of waterproof is for liquid, so moisture-proof can not be done by waterproof methods. In that case, what kind of work should be done to prevent moisture? Today, Chongqing Decoration Company Qiaoye will talk about the moisture-proof matters of interior decoration.

1. Moisture-proof of wood products.

The moisture-proof problem of wood products must be dealt with well, once the solution is not very good, in the autumn, after the water evaporation of the wood plank, it is very likely to occur wood deformation, wood floor warping and other problems. Therefore, the following aspects need to be paid attention to when buying wood products: choose well-known brands when buying wood, and pay attention to whether the wood is dry (the wood of large merchants will be dried and processed before being transported in a shipping container to reduce the chance of wood resurgence).

Where the wood products and the wall come into contact, it is necessary to paste moisture-proof paper and brush moisture-proof varnish. When the wood is shipped home, it is best to leave it in the room for a few days to dry before using it.

Second, the wall is moisture-proof until the wall is dry before brushing.

The moisture-proof problem of the wall is not properly handled, and when it rains, the wall is very prone to gray-black mildew, and it is very inconvenient to repair and redo. It is also important to paint the walls until they are completely dry before applying paint, which can effectively create a moisture barrier.

Third, the key points of moisture-proof are indispensable.

When decorating, it is necessary to fully consider the moisture-proof problem of every small detail to avoid damp deposits. For example, the toilet must ensure natural ventilation, whether there are windows, or whether there are smoke exhaust pipes, otherwise it is necessary to modify the exhaust pipe organization such as exhaust fans and household air conditioners; For the solid wood door between the cabinet and bathroom, the lower edge of the door frame needs to be 5mm from the ground, and it should be solved according to the glue. In addition, it is best to use titanium and other metal materials for the cabinet and its door frame, and the bathroom can be divided into dry and wet areas to avoid moisture corrosion.

I think first of all, we should place the wall of the wooden home when decorating, brush a waterproof, or when installing the wooden home, it is better to lay a moisture-proof film on the wall, and then we can close the doors and windows facing south or southeast, and open the windows for ventilation when the weather is sunny or in the afternoon and evening.

When decorating, the wall of wooden furniture must be brushed waterproof, or when installing wooden furniture, the wall should be covered with moisture-proof film, the doors and windows facing south or southeast should be closed, and the windows should be opened for ventilation when the weather turns cloudy or in the afternoon and evening, and the decoration of the ground should be brushed with waterproof materials, and a layer of moisture-proof mat should be added when laying the floor.