What should I do if the ground floor is wet? Is there any way to fix it?

Professional personnel can come to deal with it. It can be used to dehumidify by using an air conditioner, and then you can also use some lime to absorb the moisture in the floor, if in the winter, you can use a stove, and in the summer you can ventilate more and open more windows.

Should do a layer of insulation, but also check whether there is a certain problem with the water, if there are water stains on the ground, should be cleaned up in time, you can use the hot or cold air of a hair dryer to blow the floor, you can open the door for ventilation.

In addition, when the ground is damp, you can sprinkle lime on the ground, or put lime in a bag and place it in the room, if the above methods can not alleviate the problem of moisture return on the ground, you can buy a dehumidifier.

It is possible to lay a layer of waterproofing in the ground. Be sure to remove the dampness first, wipe it clean with a dry mop, or mop the floor with some salt water, turn on the dehumidification function of the air conditioner, open the window for ventilation, wipe the water off your shoes, and lay a waterproof layer under the floor.

You can put some desiccant. Or just close the windows to prevent moisture from returning. Turn on the air conditioner to dry all the moisture in the house. Sprinkle with some lime, it is good to absorb some moist moisture. Cover some moisture-proof floor mats.

Sprinkle some dry lime in the corner of the wall and put some coarse salt, the cost is not high. Because these things contain deliquescent characteristic substances, which can absorb water, and can dehydrate and die of cell structures, they can not only solve the problem of dampness, but also kill things that should not survive in the room (of course, people are not in the range of being killed), if conditions permit, increase the temperature in the room on the day of dehumidification, such as burning with an open flame to provide temperature, such as burning a large pot of alcohol (do not play with fire, playing outdoors at night is a bonfire, and changing it to daytime or indoor is arson) so, This will solve the problem of damp or mossy in your room.

Friends who live on the ground floor may find some damp and cold in the room every summer, but this is actually a relatively common situation. Ground floor moisture regain is also a common occurrence. So what about the resurgence of moisture on the ground floor?

How can this be solved? You'll know after reading it. <>

What should I do if the ground floor is wet?

Waterproofing agents or waterproofing paints can be used. In the process of floor decoration, special attention should be paid to the construction quality of the infill layer. When filling the soil, try to choose clay and avoid using miscellaneous soil or ordinary building materials to compaction.

During filling, it is necessary to ensure that the thickness of each layer is maintained at about two centimeters. In addition to this, do not use the soaking method as well as the loosely filled method, as these methods may increase the moisture content of the foundation. When laying floor tiles on the ground floor, it is necessary to maintain a certain gap between each floor tile, and after the floor tiles are laid, the ground should be cleaned and then caulked.

Ground floor moisture resurgence can also be mitigated by air conditioning. Because the air conditioner can effectively improve the situation of moisture regain, it can also remove the smell of mold in the room, so as to achieve the effect of removing humidity and improving air quality.

How should this be solved by the resurgence of the ground floor floor?

When the ground floor is damp, you can open the doors and windows to dry the room in the sunny afternoon, or you can use waterproofing agents or waterproof coatings, or turn on the air conditioner to improve the dampness of the room. In ordinary times, you can also use some desiccant, lime powder or activated carbon, these products can achieve a certain moisture absorption effect. Put the lime powder in a cloth bag, seal it and throw it under the bed or in some inconspicuous corner, so that the lime powder can absorb moisture and relieve the excessive humidity in the house.

If you can afford it, you can also choose to buy a professional dehumidifier, which works quite similarly to a vacuum cleaner, mainly to adsorb water vapor in the air, so as to avoid too humid in the home. Using a dehumidifier can also improve the air environment and make people feel more comfortable.

The floor tiles on the first floor are generally waterproof and not in place, so you can apply a layer of waterproof paint or waterproof agent on the floor tiles, but before painting, the surface layer should be chiseled, and then cleaned, and then painted so that the adhesion is stronger, and it can also penetrate into the pores.

First of all, indoor air circulation should be maintained, and doors and windows should be opened as much as possible to ventilate and ventilate, which is conducive to effective evaporation of water; In the process of decoration, we should pay special attention to the quality of construction, do a good job of moisture-proof treatment, and can use desiccant to prevent damp and dehumidification dryness and reasonable placement.

Be sure to strengthen ventilation, you can properly maintain indoor air circulation, but also choose waterproof agent to apply, you can use quicklime.

The solution to the moisture regain on the ground floor is the method of applying waterproofing paint or waterproofing agent. In the process of ground decoration, attention should be paid to the construction quality of the filling layer. Clay should be used for the filling, and it should never be tamped with miscellaneous soil or building materials.

When filling, it is necessary to ensure that the thickness of each layer is about 20 mm. In addition, the loose fill and soak method cannot be used for construction, as this will increase the moisture content of the foundation soil. When laying the floor, a certain gap should be maintained between the floors, and the ground must be cleaned before caulking.

In the process of caulking, fine stone concrete should be used to caulk. If the floor slab is thick, a layered caulking method should be used.

1.Household air conditioners are a great tool to remove resurgence. When there is a musty smell in the room, you can turn on the dehumidification function of the air conditioner, which can effectively remove the moisture in the room and achieve the purpose of dehumidification.

Note that if you turn on the dehumidification mode of the air conditioner for a long time, the room will be drier, so the following opening and closing times should be set according to the situation in your own home. Check the cause of the moisture regain rate of the floor tiles on the first floor. If it is caused by hollow drums, clean up the floor tiles of the hollow drums and install them to solve the problem of moisture regain.

2.The following is an introduction to how to deal with the underlying resurgence of the relevant content, I hope it will be helpful to friends in need. Floor moisture protection is a crucial step in home decoration and has a great impact on the comfort of future living.

Therefore, when decorating the house, you must pay attention to the moisture-proof work on the ground. When laying the floor, a certain gap should be maintained between the floors, and the ground must be cleaned before caulking. In the process of caulking, fine stone concrete should be used to caulk.

If the floor slab is thick, a layered caulking method should be used.

3.Cracks that are usually millimeters or more wide are visible cracks in cement mortar or cast-in-place concrete floor slabs. Regular cracks usually occur along the longitudinal or transverse direction of the room and are formed by shrinkage cracks in the material.

Then check the ground for hollow drums. The test method can be gently tapped vertically along the ground with a wooden stick. If there is no percussion, there will be a hollow drum.

The above is the answer to the question of what to do if the ground floor is re-wet.

When the floor is damp, you can choose to open all the doors and windows, dry it well when the sun is stronger, and then lift the floor at the bottom of the floor to do the corresponding moisture-proof and waterproof facilities, coat the waterproof layer, and then choose the laying of the floor after the waterproof layer dries.

In this case, you should choose to make a layer of moisture-proof layer and waterproof layer to prevent resurgence, you can choose to re-do the floor, usually maintain a dry environment at home, try to avoid opening windows, and reduce the ventilation effect.

You can open more windows for ventilation, you can also turn on the air conditioner to remove moisture in the room, and you can also find some relevant professionals to deal with it, because this situation is very troublesome, and it is difficult for us to solve it personally.

Enter the area and get the decoration for free**].

Ground moisture return is a very common phenomenon, especially in southern cities, but after the ground moisture return, the indoor environment will become very humid, and even emit odors, causing a lot of inconvenience to home life, so how to deal with the ground moisture return on the ground floor? How to prevent moisture on the ground? Let's take a look!

First, how to deal with the ground moisture on the ground should be closed in the case of heavy external moisture, and the windows should be opened more for ventilation, so that the indoor water vapor content is reduced, in addition, when the ground is damp, you can sprinkle lime on the ground, or put the lime into a bag, placed in the room, if the above methods can not alleviate the problem of ground moisture, you can buy a dehumidifier. Second, how to prevent ground moisture-proof 1, in the process of ground decoration, need to pay attention to the construction quality of the fill, first of all, the fill should use the way of clay ramming, must not use miscellaneous soil or building materials for ramming, and when filling the soil, the family shouts to ensure that the thickness of each layer is about 20 mm, in addition, can not use the loose fill immersion method for construction, because this will increase the water content of the foundation soil. 2. When laying the floor, a certain gap should be maintained between the floors, and the ground must be cleaned before caulking.

In the process of caulking, it is necessary to use fine stone concrete to embed the joints, and if there is a situation where the ground slab is thick, the method of layered caulking should be adopted. 3. In the process of ground construction, the ground moisture-proof needs to be combined with the moisture-proof wall base, and the wall base should be coated with waterproof mortar, and the inner wall in contact with the ground should also be coated with waterproof mortar. In addition, it should be noted that the difference between the indoor and outdoor height of the moisture-proof floor should be more than 30 cm to prevent rainwater from seeping into the room.

Summary: The relevant content of how to deal with the return of moisture on the ground on the ground floor is introduced here, hoping to help friends in need. Ground moisture-proof is a vital step in home decoration, which has a great impact on the comfort of living in the future, so we must pay attention to the ground moisture-proof work when decorating the house.

Do the math how much it will cost you to renovate your home

<>1. The most important time for the floor moisture-proof at home is morning and evening, which can avoid these two times to open and conceal the window for ventilation, so that the wall can be exposed to sunlight, so that the water can also evaporate quickly, and the dehumidification effect can be achieved to slow down the potatoes;

2. Take warm water at about 40 degrees Celsius, and add a spoonful of salt to it, after the salt is fully dissolved, you can start mopping the floor disturber, pay attention to the mop to wring out some, so as not to drag more and more damp.

Summary. 1. Open windows for ventilation.

Opening windows to let in the damp house is the most natural way, as long as it is not rainy weather, this is a good way to reduce indoor moisture.

How to deal with the serious moisture return of the floor at home.

Dear, hello teacher is very happy to answer for you, I found here is that the home fight number floor moisture treatment is convenient for the following 1, open the window ventilation in the house damp and open the window to ventilate the most natural way, as long as it is not the rainy weather, this disadvantage is a good way to reduce the indoor humidity of renting silver.

2. Placing lime lime is a good thing for dehumidification, you can buy a little bulk lime, and then wrap it in breathable cloth, tie it up, and rent it in all corners of the room.

3. Place a moisture absorption box or dehumidification bagYou can buy a ready-made moisture absorption box or dehumidification bag in the supermarket and place it in a particularly humid place at home, and the dehumidification effect is also very good.

4. Use air conditioners to eliminate noise or dehumidifiersIf you have air conditioners at home, you can consider using the dehumidification function of the cong number air conditioner, or you can buy an air dehumidifier, which can dehumidify and make your home more comfortable.

For your reference! Hope mine can help you!