What materials are used to decorate the wall moisture proof, and the five major moisture proof mater

Wallpaper Nowadays, after years of development, wallpaper has appeared in natural materials and fabric materials and other materials of wallpaper, these natural material wallpaper has a good breathing function, good ventilation, good moisture-proof effect, will not appear moldy.

Waterproofing membrane waterproofing membrane is also a good wall moisture-proof material, it is mainly used for walls, roofs and other places moisture-proof, is a kind of rainproof, waterproof penetration of flexible building materials, and this material has the characteristics of water resistance and fracture resistance.

The board moisture-proof board is pressed from wood, and colloids are added in the middle, and there is a moisture-proof layer on the surface of the board, which can isolate the moisture in the air and better protect the wall from moisture.

Tile moisture-proof tile is also a good choice, it has a heavy glaze layer, and the water absorption rate is low, which can make the home decoration environment more moisture-proof and mildew-proof. How to deal with the moisture-proof wall.

Moisture-resistant material. There are two kinds of moisture-proof treatment for indoor walls: one is to form a film on the surface of the wall to block moisture intrusion, but once this moisture-proof film is damaged, it loses its moisture-proof effect; There is also a protective layer formed from the surface of the wall deep into the interior to achieve the effect of moisture-proofing.

Compared to the first type, the second type of moisture protection is better and more durable.

It is usually used to coat the surface of the wall with professional anti-mildew and moisture-proof paint. For example, water-based coatings use water as a solvent or dispersion medium, and use aqueous solutions of polymer materials such as silicone rubber (polysiloxane) polymers, acrylates, styrene-acrylate copolymers, and vinyl acetate polymers as film-forming substances, and add a variety of auxiliary components to make coatings.

This coating can be directly applied on wet surfaces and humid environments, the coating can be well attached to the surface of the wall, forming a protective film, because its film-forming material is insoluble in water, the coating has strong water resistance, can play a good moisture-proof effect.

After the mold on the wall is generated, the room will smell very bad, and there will always be a tidal smell, which will affect our living life. Therefore, it is very important to avoid dampness on the walls, so be sure to do this job well when decorating that homeMoisture-proof materials for wall decorationWhat's there? If it is the south or our bathroom, there is a lot of moisture, so in order to dry the wall, you must make a stool to prevent water and moisture.

The wall decoration of the home is moisture-proof: Coating, for the moisture resistance of the wall, there are two options: one is to form a moisture barrier film on the outside of the moisture barrier wall to block the intrusion of moisture.

Of course, if the moisture-proof film breaks, it loses its moisture-proof effect. The second is to use moisture-resistant paints, which last for a long time and humidity. For water-based paints, it has a good moisture-proof effect.

When brushed in a humid environment, this type of paint absorbs better into the walls, forming a protective film that is waterproof and resistant to moisture, which has a great effect.

The wall decoration of the home is moisture-proof: Waterproofing mortar. Moisture-proof and waterproof mortar layer, moisture-proof wall layer, apply 15-20mm thick between water and moisture, and then apply asphalt on both sides.

The wall decoration of the home is moisture-proof: Wallpapers, since the development of wallpapers for many years, there are also wallpapers made of natural materials and fabrics. It has good functionality, is suitable for natural materials such as wood, is breathable, better resistance to moisture and mildew, does not appear on wallpaper, and is also a decorative option with little cost.

4. Moisture-proof material for the wall: board, moisture-proof layer is made of wood. Add colloids in the center. For moisture-proof boards after moisture-proof treatment, there is a moisture-proof layer on the board surface, which can better protect the wall from moisture.

5. Tiles, moisture-proof tiles are also a good choice, with a thick layer of glaze and low water absorption. The holes in the tiles are dense. These features can make home renovation environments more resistant to moisture and mildew.

Here's what we've learnedThe wall decoration of the home is moisture-proof

You can get it for free

After living in the house for a long time, there will be various problems, and the wall problem is the most, so I will talk about itThe wall decoration of the home is moisture-proofWhat are the materials andThe wall decoration of the home is moisture-proofmethod.

1. Wallpaper. Today, after years of wallpaper development, natural materials and fabrics have appeared in wallpaper, which have good respiratory function, good ventilation, good moisture resistance and no bacteria.

2. Waterproof membrane.

The waterproof membrane is also a good moisture-proof material on the wall. It is mainly used for waterproofing walls, sky noisy spine plum boards, etc. It is a flexible building material that can withstand rain and prevent water penetration, and this material is waterproof and fracture-resistant.

3. Plates. The wall decoration of the home is moisture-proofThe board is pressed by wood, and colloids are added in the center. There is a moisture-proof layer on the surface of the circuit board, which needs to block the moisture in the air and better protect the wall from wild tides.

4. Wall tiles. Ceramic tiles are also a good choice because they have a thick layer of moisture barrier and low water absorption, which makes the home environment more resistant to moisture and mildew.

1. Close windows in the morning and evening to reduce humidity.

The wall decoration of the home is moisture-proofThe simplest way to do this is to close the windows tightly to prevent moisture from entering the room, especially on windy days in the south. Always remember to close the windows of your home. However, it is best to close the windows tightly in the morning and evening.

The humidity of the air during these two periods is relatively high. If the windows are not closed on time, it is easy to create moisture in the room.

2. Use desiccant and other products to absorb moisture.

Of course, you can also put some desiccant, moisture absorbent chambers and other supplies in your home and use these products to a certain extent to reduce the humidity in your home.

3. Use a dehumidifier.

The wall decoration of the home is moisture-proofIf the family has the conditions, you can also use the dehumidifier, and the effect is also good. A dehumidifier can remove moisture from a southern room, but it's best to buy a real dehumidifier. Although the cost is higher, the dehumidification effect is better.

4. Check in time to remove water vapor from the wall.

When the weather is wet, regularly check the moisture on the walls of your home. If you notice condensation on your walls, take appropriate action. For example, you can use a dry cloth, dehumidifier, air conditioner, etc. to absorb moisture from the walls.

You can get it for free

The dampness of the wall not only affects the appearance of the interior, but also easily breeds bacteria and affects the health of the residents. Therefore, when decorating the wall, most of the owners of Tealu, Li Zhiheng, will choose moisture-proof materials. So what are the moisture-proof wall coverings?

There are many moisture-proof wall materials, such as moisture-proof coatings, which can penetrate into the wall and form a transparent film after drying, which is not only hard but also moisture-proof; For example, the waterproofing membrane is made of asphalt material, which can be used on the wall to have an anti-crack and waterproof effect; For example, wallpaper made of wood and fabric can be selected, which has excellent mildew resistance and air permeability.

What are the causes of mold on the walls:

1. Environmental reasons.

First of all, environmental factors, such as the rainy season, often rainy, high air humidity, so that the bottom of the household due to poor ventilation, a large number of water droplets will be formed on the wall, a long time, will form mildew.

2. Reasons for residence.

Secondly, the mold of the wall is related to our daily habits, such as the closed environment makes the indoor ventilation poor, and the humidity of the wall is high, which causes the wall to mold. It is recommended to open windows frequently and allow air convection to make the indoor air fresher and drier.

3. Structural reasons.

Again, the walls of most buildings are framed structures, and the connection between the infill wall and the beams and columns will crack over time, resulting in water leakage, which will also lead to moisture and mildew on the wall.

4. Construction reasons.

Finally, the mold of the wall may also be caused by construction reasons, such as workers cutting corners, the brick paving of the exterior wall is not firm, and the improper proportion of mortar is not allowed, which will lead to water seepage and mildew on the wall in the later stage.

Summary: The above is the introduction of moisture-proof wall materials and what are the causes of mold on the wall, I hope to help friends in need, if you need to know more about relevant knowledge in the later stage, welcome to pay attention to Qeeka Home information.

Renovation of a new home is very important to protect against moisture, especially in the humid season, which is a problem that most people are afraid of. If you don't deal with the moisture-proof problem, it may dry up and cause various health hazards. To do a good job in the decoration of the new house moisture-proof, you can choose the method that suits the room, and moisture-proof is also a basic skill that is worth investing in.

Here are some tips for protecting against moisture.

1.wall treatment.

When building a house, install waterproof materials on the walls of the basement, and some people can also apply moisture-proof paint on the new walls to ensure that the moisture on the walls stays inside the walls. This effectively prevents the humid air from the basement and downstairs from penetrating into the rooms upstairs. For basements, choosing polypropylene film to lay on a new concrete wall can be very effective in keeping out moisture.

2.Ventilation circulation.

Keeping the room well ventilated allows air to flow and prevents moist air from accumulating in the room. Installing a good ventilation system will allow moisture to escape from the room and keep the room dry. It is very necessary to open the windows regularly for ventilation after the renovation of the new house, especially in the wet season or humid weather.

3.Humidity control.

Humidity control is a completely necessary method to ensure that the air in the room is dry. When renovating a new house, Shouqing can install a hygrometer to measure the humidity in the room to keep the humidity in the room within a proper range. After some home renovations, additional dehumidifiers or humidifiers can be installed to adjust the humidity as needed.

4.Moisture absorbents.

Moisture absorbers can help prevent moisture. This is a special product that absorbs moisture from moist air and helps maintain humidity in the room. Moisture absorbers can be used in living rooms, bedrooms, kitchens, and any other places that need to be protected from moisture.

When choosing a moisture absorbent, it is necessary to choose the appropriate product according to the user's needs.

In short, it is very important to prevent moisture in the decoration of new houses, and ensure that the humidity in the room is not too high to ensure the health of the occupants and the longevity of the furniture. It is recommended that the owner install various moisture-proof materials and equipment during the renovation of the house, especially in the basement and damp rooms, which is very necessary.

In rainy weather, indoor walls are prone to dampness and mold. If these conditions occur on the wall, it will not only directly affect the beauty of the wall, but also breed bacteria and odors, which will affect people's health. Therefore, we usually carry out moisture-proof treatment on the interior wall, so what material is good for the interior wall to prevent moisture?

Let's take a look.

1. What materials are used for moisture-proof interior walls?

1. You can choose to buy some moisture-proof coatings, because this kind of paint can effectively prevent moisture and mildew on the wall for a long time. Moisture-proof paint is a kind of water-based paint, which can be well adsorbed on the wall in the wet link. At the same time, it can also form a layer of waterproof and moisture-proof protective film on the wall, which is simple and very environmentally friendly, and is an ideal moisture-proof coating.

2. Wallpaper is also a wall decoration method that we often use, and the wallpaper uses natural materials and fabrics as its raw materials, so it has very good air permeability and can effectively prevent moisture. It can be said to be a moisture-proof material with high cost performance.

3. There is also a kind of interior wall moisture-proof material is waterproof mortar, which only needs to be smeared with a thickness of 15 to 20 mm mortar on the moisture-proof layer of the wall, and then brushed with asphalt on both sides to achieve a very good waterproof effect.

4. The moisture-proof board can also play a moisture-proof role on the wall, and the moisture-proof board will be followed to the wall, which will form a layer of tidal layer, which can effectively isolate the moisture in the air and protect the wall from moisture.

5. Ceramic tiles can also effectively make the inner wall moisture-proof, and choose tiles with heavy glaze layer and low water absorption when choosing tiles. And the holes of the tiles should be dense, so as to effectively avoid the appearance of supermarket mold on the wall.

Summary: What materials are used for moisture-proofing of interior walls? Everyone has understood it after reading the article. I hope that the content of Shanghuai Xiangmian can bring you some help and suggestions, if you need to know more about it, please continue to **** Oh.

Now there will always be a house that has been decorated but the wall has a moisture return problem, in fact, the main reason is that the wall is not completely dry when we decorate the wall, so how to prevent moisture when we decorate the wall at home? Let's talk to us about itThe wall decoration of the home is moisture-proof1. Anti-Lusen tide treatment method for wall decoration at home.

1. Choose breathable materials, now there are many wallpaper materials in the home improvement market, including non-woven fabrics, wood fibers, PVC, glass fiber substrates, cloth surfaces, etc., with several materials Relatively speaking, PVC wallpaper is the most breathable, the easiest to exhaust the water vapor from the wall in it, and it is very easy to form mildew spots after a long time.

2. Keep the wall dry, the wall must be kept dry, and the new cement construction usually needs to be maintained for 20 to 40 days before the wallpaper can be paved. However, it should be noted that when decorating, you must be careful not to let the non-standard construction mix the sea sand that is not suitable for wall painting. This is because the sea sand has a high salt content, which is relatively easy to absorb water, which buries the "water disaster" for the wall in the later stage.

3. Pay attention to the construction, the wallpaper style has a variety of patterns, and when paving the wallpaper, we must pay attention to whether there is a large gap between the two wallpapers, and whether the parquet is aligned. In addition, we will wet the wallpaper when we water it when we pave it, and there will be a certain shrinkage size after drying, so we should usually leave a good telescopic position. As far as possible, the shrinkage joints of the wall should not be opened to the windward outlet.

4. Pay attention to maintenance, proper maintenance can prolong the life of wallpaper and enhance the moisture-proof function. During the construction period and within 24 hours after the completion of the construction, do not open the windows and doors fully. Indoor wind can cause the wallpaper to dry sharply and shrink unevenly, causing cracks at the joints.

After 3 days of paving, attention needs to be paid to adjusting the ventilation. During the day, you can open doors and windows to maintain ventilation; At night, it is best to close the doors and windows to prevent moisture from entering, which will affect the firmness of the paste.

Second, what are the precautions for wall decoration?

1. Precautions for wall decoration and keep the paint. Paint is a flammable material, the temperature is very high in summer, and it is easy to cause disasters due to improper storage. Therefore, for summer, the paint needs to be stored in a cool and ventilated place, and the storage container must be well sealed.

Care should be taken to keep away from open flames and electrical sockets to avoid sparks igniting the paint. It is best to use the paint within a month of purchase.

2. The wall is difficult to dry. In the summer, the wall will appear as if the wall search is dry. During construction, the construction personnel should ensure that the wall base is completely dry before applying the wall paint.

If conditions permit, the moisture content of the wall can be measured with the help of professional instruments, and the construction can be carried out after reaching the standard.

3. Paint the wall to avoid rainy days. When painting walls in summer, you need to avoid painting in humid or rainy weather. Because during construction, the wall foundation will be relatively wet, and the paint will be painted before it is completely dry, and the moisture will easily cause the paint film to lose its adhesion when it penetrates into the paint surface, causing the wall to bulge into a drum.