What is the purpose of the air compressor heat exchanger to discharge free water?

There is water in the air, which is called "humidity" in the air. When air is compressed, it becomes supersaturated and the water in the air precipitates and turns into a liquid. The moisture content of compressed air is related to the humidity of the air, such as excessive humidity in the cabin, or seasonal reasons, which can cause the moisture content in the air to exceed the standard.

2.Article 2. The production of liquid water during compression.

When the air compressor is working, the internal temperature of its head is very high. When an air compressor is running, the moisture from the inhaled natural air forms water vapor and is discharged with the compressed air.

The air reservoir not only provides buffer and storage space for the compressed air, but also serves as a cooling agent. When the compressed air passes through the air storage tank, the high-speed air flow hits the wall of the gas storage tank to produce confluence, which causes the temperature in the gas storage tank to drop rapidly, and a large amount of water vapor liquefies, forming condensate. If we catch the wet weather or winter, more condensation will form.

The drainage measures of the air compressor itself are ineffective, and the automatic drainage device of the air compressor itself is blocked or the automatic drainage device of the air storage tank is blocked. (The air compressor only guarantees the function of draining water once).

Due to the lack of dedicated compressed air drying equipment, the corresponding dryer installation is insufficient or the installation is working normally (the drying equipment is faulty, not detected and treated in time), and the compressed air compressor does not process the gas in time, resulting in the removal still contains a large amount of moisture, which cannot meet the requirements. Normal use requirements.

In cases of high demand, a higher level of drainage is also required. In the production process with strict requirements for the quality of compressor gas, there are usually precision filters and other facilities to carry out secondary action on the gas and further purify it until the production requirements are met. In order to ensure that the gas quality meets the requirements of the production process, when there is water in the air compressor, the cause can be checked in time according to the above situation, the fault can be found and remedial measures can be taken.

Due to the high water content in the compressed air, one customer asked, "What will happen if the air compressor does not release water for two months?" "Without water, it can lead to an increase in the water content of the compressed air, which affects the quality of the gas, affects the back-end gas equipment, and more likely the quality of the product.

For example, water stains will remain on the product, spray paint will form bubbles, etc.; For the air compressor itself, it will cause poor oil and gas separation effect, the pressure difference of the oil and gas separator is large, and the mechanical parts are rusty, which may cause large failures.

When is it usually drained? According to the specific use environment and operating conditions, the general drain uses a manual ball valve, which needs to discharge condensate regularly, and the installation of the automatic drain needs to check the self-discharge function regularly. The frequency of drainage or inspection depends mainly on the humidity of the inhaled air (season and environment, humidity is getting higher and more frequent.

The purpose of discharging free water from the heat exchanger of the air compressor is to prevent the accumulation of free water inside the machine, resulting in a humid environment inside the machine, because when your air compressor is replacing the heat, the temperature difference between the inside and outside of the air compressor is relatively large, which will produce fate.

The principle of the air compressor water heater (air compressor waste heat**) is that the switch will generate a large amount of waste heat in the air compressor, and the water will pass through the heat exchanger in the air compressor water heater, and the heat in the oil will be directly transferred to the water, and the oil and water will be separated, and the hot water produced will be clean, and the water quality of the tap water will not be polluted in any way, and the heat exchanger channel is 316 stainless steel, which has a good protective effect on the water quality. It is an energy-saving product of today's industrial reform, which not only does not produce pollution to the environment, but also saves energy and electricity, and basically does not have any harm to the environment.

The air compressor does not produce water, but in the process of compressing air, it becomes a "porter" of water by the way. When the air in its natural state is compressed or cooled, it will tend to be saturated until it is supersaturated, and the water in the air will precipitate from the gaseous state to the liquid state, and the water will be produced.

In the case of compressed air systems, compression is the goal, and cooling starts from the moment it is compressed.

This is actually the way he discharges it in the form of a liquid, which is good for the environment.

The purpose of the heat exchanger to remove free water is pure purification. It has a purifying effect.

Hello friends, the purpose is to better discharge the free water, make the machine run faster, and can play a role in enhancing the operation.

The purpose of the air compressor heat exchanger is to reduce the temperature of the free water.

The purpose of the air compressor heat exchanger to drain the avocado water is to keep him in a self-cleaning role.

The air compressor heat exchanger excludes the water by the water is a very good one, and you have to pass it for this purpose. His kind of free water discharges you can go to the normal effect.

The compressor is discharged with pleasure and a little water. The purpose of discharging water from the wooden bottom may be those with more impurities, and it also needs to be discharged.

The purpose of the air compressor to exchange heat gas to discharge the water in the oil, maybe the incubator must have drainage, although the mechanical aspect does not understand, but I know that it must be to discharge wastewater, is it necessary to add water?

The purpose of the air machine to exchange heat to drain the oil and water, this must be to drain the water, because she followed some of the skills she used.

This is done in order to better make its air smoother.

If the air compressor is replaced with hot air drainage, the purpose of water is still relatively clear.

The purpose of the planned date to discharge free water is to pick you up, let's come to the air compressor and I here.

The purpose of draining the water from the oil is of course very broad and has something to do with him.

g is different, pay attention to the different purposes, there is no way to ask for work, and the task will be completed poorly by personality.

Excluding this greasy water, what is there not to order? Do you think it could be the rest of the body? It may be that daily necessities of the tool.

The red girl came and went for a few nights, and the tempering of the oil dripping water should be this originally, which is the most important discharge.

The purpose of the air compressor heat exchanger to discharge free water is to discharge clean water.

Hello, it may be caused by insufficient voltage. Call the after-sales customer service, and they will deal with it as soon as possible.

In order to let him do this, it should be because this Zhourun school is also classified, and I chose the consciousness.

For the other purposes, it must be a very developed case or present the relevant technical personnel, and then see what their purpose is.

The purpose of discharging free water from the air compressor heat exchanger is to discharge the internal moisture inside and avoid affecting the space for air compression.

If it is not discharged, it will cause the lubricating oil of the air compressor to emulsify, which is not good for the rotor of the screw main engine, and it is easy to rust and stuck.

When the air compressor is working, it is used after sucking in and compressing the outside air. Since the air contains moisture, especially in the south or in summer, the moisture in the air is very large, so the compressed air is easy to form water droplets and settle in the air tank; At the same time, many air compressors currently use noiseless air compressors, and the compressor core needs to be lubricated and cooled with oil, so the oil is also easy to deposit in the air tank. If the air compressor does not discharge the remaining gas and oil and water after each use, over time, these oil and water will be carried into the air pipeline and the relevant parts will be blocked, resulting in insufficient air pressure or insufficient flow failure.

1.Too much moisture content will cause rust in the main engine oil and gas drum equipment2In the north, the air compressor air control system is additionally dewatered to prevent who remains and causes ice to freeze in winter and the air control system fails.

3.This can lead to emulsification of screw oil. Affect the lubrication effect thank you.

There is moisture in the air, and when the machine is running, it will generate heat, and solid moisture will form and settle down at the bottom of the machine. When we want to start the machine, we first put the water precipitated in the oil and gas barrel, just to delay the service life of the machine!

The heat medium of the tubular cooler is the tube inlet on the cylinder, and flows in a zigzag way to the tube outlet through each baffle channel. The cooler medium is flowed through two pipes, that is, the cooler medium enters half of the cooler pipe from the water inlet through the water distribution cap, and then flows from the return cover to the other half of the cooler pipe to the other side of the water distribution cover and the outlet pipe. In the process of double pipe flow, the cold medium absorbs the waste heat released by the hot medium and discharges it from the water outlet, so that the working medium can maintain the rated working temperature.

Of course, the condensate of the air compressor post-treatment equipment is directly discharged, if your equipment does not leak or anything, the condensate is in line with the requirements of environmental protection direct discharge, of course, if there is oil leakage in the treatment device or air compressor body, it is another matter. Moreover, the air compressor post-treatment equipment should include a dryer, which is used to remove water, and there should be no need for condensate discharge.

Here's how it works:

When the compressed air enters the oil-water separator, the flow direction and speed change sharply, and then rely on inertia to separate the oil droplets and water droplets with a density larger than the compressed air.

1. The common ones are impact oil-water separator and annular rotary oil-water separator, and their working principle is as follows:

After the compressed air enters the oil-water separator housing from the inlet, the air flow is first blocked by the partition and bounces back downward, and then rises back up again, resulting in a circular rotation. In this way, the water and oil droplets are separated from the air and settle at the bottom of the shell under the action of centrifugal force and inertial force.

2. Another oil-water separation system adopts stainless steel wire mesh coalescing filler inside, and the shell is made of steel welded tank structure, and the general use pressure is.

Its principle is to use the organic combination of cyclone and stainless steel wire mesh fog capture, and at the same time adopt the mechanism of direct interception, inertial collision, Brownian diffusion and coagulation, etc., which can effectively remove dust, water and oil mist in the compressed air, and the amount of water and oil removal is large, and it can adapt to a wide range of working conditions.

When compressed air and other gases containing oil and water pass into the oil-water separator, the large droplets fall to the bottom of the oil-water separator under the action of gravity, and the mist droplets are captured by the wire mesh and condensed into large droplets that fall to the bottom of the oil-water separator. As a result, the entrained liquid is separated, and the separated liquid flows into the lower part and is discharged through the manual opening valve or discharged from the body by installing an air drain valve in the lower part.

The principle of action of the oil-water separator in the air compressor is: the principle of coalescence separates oil and water, the oil floats to the upper layer and is collected by the oil collector, and the water is discharged.

The air compressor oil-water separator mainly treats the oily wastewater of the air compressor condensate, and the sewage enters the oil-water separator for two-stage separation.

Performance characteristics of oil-water separator in air compressor:

1. Small size, movable and easy to use.

2. Two-stage separation, good effluent effect, can be directly discharged up to the standard.

3. There is no need for pretreatment with pesticides, and it can be discharged directly up to standard.

4. The separation speed is fast, ten times that of general gravity separation.

5. Automatic operation and easy maintenance.

Application fields of oil-water separator in air compressor:

All kinds of air compressor oily wastewater and oily wastewater from other industries.

The air compressor exhausts condensate generally by regular discharge, which can effectively drain the condensate, and more importantly, it will not have a certain impact on the air volume of the air compressor; If the condensate is discharged all the time, the exhaust volume and pressure of the compressor will be reduced.

It is recommended to install an automatic sewage drain to automatically discharge the liquid level to the set level, which can not only discharge the condensate in time, but also will not affect the exhaust volume of the air compressor.

Hehe, there is water in the exhaust. It may be that there is something wrong behind your air compressor, resulting in a large water content.

No problem, just do the post-processing.

There is no big problem, just find a ** business to repair it.

The air compressor can be drained with water.

It is recommended that you contact Weibo Electromechanical ****, they are a professional air compressor equipment sales and maintenance company! Contact **85260806

The oil-gas separator is one of the important components of the whole electric submersible pump system, and its role is first to serve as the suction port for oil and gas to enter the multistage centrifugal pump; Secondly, before the mixed gas liquid enters the multistage centrifugal pump, the free gas is separated from the well fluid through the separator, so as to reduce the influence of the gas on the working characteristics of the electric submersible pump, prevent cavitation and gas lock of the centrifugal pump, and enable the multistage centrifugal pump to work normally.

Its function is first of all as a suction port for oil and gas to enter the multistage centrifugal pump; Secondly, before the mixed gas liquid enters the multistage centrifugal pump, the free gas is separated from the well fluid through the separator, so as to reduce the influence of the gas on the working characteristics of the electric submersible pump, prevent cavitation and gas lock of the centrifugal pump, and enable the multistage centrifugal pump to work normally.

Air compressor features:

The compressor is directly driven by the electric motor, so that the crankshaft produces rotary motion, and the connecting rod is driven to produce reciprocating motion of the piston, causing the cylinder volume to change.

Due to the change of pressure in the cylinder, the air enters the cylinder through the air filter (muffler) through the intake valve, and in the compression stroke, due to the reduction of the cylinder volume, the compressed air enters the air storage tank through the exhaust pipe and the check valve (check valve), and automatically stops when the exhaust pressure reaches the rated pressure.

When the pressure of the gas tank drops, the pressure switch is automatically activated.