-
The initiative is not to do the top, the 3200 height wardrobe is too high, it is best to have a proper ceiling first, modify the top, and then connect the wardrobe. I don't do it at the top, but I install a baffle on the top layer. This method is a compromise method, that is, not to do the top, in order to prevent the top surface from falling ash, on the top layer of a layer of baffle, so as to deal with various problems.
In the later stage of decoration, if it is decorated with gypsum line, it will be more beautiful.
1. Seal the ceiling or gypsum board.
After the ceiling or gypsum board to seal the top position of the vacated wardrobe, it is a common practice, which makes the wardrobe will not be left empty to become a sanitary dead corner of dust, and at the same time, it also makes the space appear more neat and generous, and at the same time, if you want to install ** air conditioning, such a design is just right.
2. Hanging cabinets. For a small family, the space is relatively small, and the top of the wardrobe is also a large storage position, if you don't want to waste these spaces, you can also use the space on the top of the wardrobe through the way of hanging cabinets, but this position is relatively high, and you can only store some seasonal clothes or quilts and other items that are not commonly used.
When the top is achieved, due to the high floor height, such a cabinet looks imposing and has a strong sense of wholeness. Of course, you should have a small ladder and put the clothes and quilts on top of it. Move once or twice a year to prevent dust and not see items.
Leaving space above the wardrobe for a long time will accumulate dust, which is difficult to take care of, and will also become a space for infrequently used items, which will look chaotic. A custom wardrobe is a wardrobe tailored to the location of the space, and the height of the wardrobe can be customized according to the needs of the owner. That is to say, a custom wardrobe can be done at a height of meters, and it can also be made at any height below meters.
The wardrobe adopts the design to the top, especially the built-in wardrobe, and the fashionable cabinet door, which creates a neat and beautiful vision of a wall, and there is no visual abruptness of the wardrobe at all, and the overall living space is more harmonious and unified.
-
That's not good. If it goes to the top, it looks very inconsistent. And you can't use the capacity on it, it's just a waste of resources.
-
This is not good, greatly reduces the space, the sense of space is very strong, affecting the overall beauty of the environment, people have been in such a space for a long time, the mental state will be problematic, it is very likely to get depression.
-
It's not good to do that. Doing so will make the room feel too small and oppressive.
-
You don't have to make the wardrobe so high, in fact, as long as the height we usually use can be effectively reached, too high will not be used, and it will need to be replaced after a long time, if it is so high, it will not be convenient to replace.
-
I think if the location of the room is large enough, it is possible to customize such a wardrobe, but it is better not to reach the top completely, it is better to leave a little space, and not too much.
-
Yes, because many wardrobes can be customized in a customized way, so as long as you want to customize, you can do it, and there is nothing that cannot be done.
-
No, it's going to be a tight space, but if you don't mind, whatever.
-
If the ceiling height of the bedroom is relatively high, you can choose the wardrobe customization, which can be customized to the roof.
-
Most people will choose to make the wardrobe to the top, the purpose is to make reasonable use of the space at the top of the wardrobe and increase the storage function. Encapsulating the top of the wardrobe will keep the top layer from dust, giving the wardrobe a sense of wholeness, which is very practical. Many people may feel that the height of the top floor is too high, which is very inconvenient for people to put things.
The disadvantages of the wardrobe being made to the top are also obvious.
1. The height of the wardrobe to the top is too high, the pressure on the side panel is relatively large, and it is easy to deform for a long time, and the life of the wardrobe is shortened.
2. Because the wooden planks contain moisture, they will be affected by the temperature will cause thermal expansion and contraction, and the top of the wardrobe will damage the decorations of the top wall.
3. The wardrobe will give people a depressing feeling visually.
4. The wardrobe is not done to the top is a choice that modern young people like, the general wardrobe is not to be topped, choose to seal it with gypsum board, and add a sliding door below, the overall effect is fashionable and beautiful, and it also reduces the cost.
5. The disadvantage is that it is easy to hide ash above, it is not easy to clean up, and it is easy to become a sanitary dead end.
-
Yes, it's all custom now, and it's quite popular.
-
Yes, go and choose a custom home
-
It can be done, either by connecting the board, or by making the upper and lower sides of the body.
Generally, in home decoration, the distance between the bottom edge of the socket d is between meters. The height of the commonly used air conditioner is about two meters, and the distance between floor air conditioners is about one meter. The size of the water heater in the bathroom is about meters. >>>More
The height and size of the TV wall socket in the bedroom are related to the height of the TV, and the position of the socket, in general, if the socket is under the TV, the height is relatively low, and the size is generally large, which is convenient for circuit connection, if it is a wall-mounted TV, then the height will be higher, probably parallel to the sofa.
It should be 80 centimeters to one meter, this height is just right, and it will not hurt our eyes, and the position should be confirmed according to the magnitude of the electric potential, as well as the distance from our human body.
1. Some cars can only adjust the high beam, and some can adjust the high and low beam. >>>More
Step 1: First, find a site with a horizontal ground and vertical white walls in the underground parking lot. Facing the white wall, drive the car straight and slowly, and stop the front of the car as close to the wall as possible. >>>More