The wall has been solidified, at this time, is it directly tiled or should it be brushed first?

The wall is brushed with the wall solid, and the tiles are pasted on the wall solid, relatively speaking, it is relatively simple, as long as the appropriate paste construction method is selected, the ideal paste effect can be achieved. The following is a detailed analysis and answer for readers. If in putty.

The wall is solid on the plastering layer, the wall can not be tiled, the density of the tiles is high-quality and heavy, and it is difficult to adsorb on the putty! Be sure to remove the putty plastering layer, clean it up, and then brush the wall interface agent.

Only then can you put bricks! The wall tiles that have been brushed through the wall must be glued with ceramic tiles, and it is best not to use cement mortar.

Use tile adhesive to pave with tile adhesive to increase the friction between the tile and the wall.

<> the wall that has been brushed has no effect on the back tiles, and the wall is only to fix the putty and dust on the wall from falling off the wall before brushing the wall. It is indispensable to resist alkali and mildew and increase the adhesion between putty and the wall. 108 is the glue, if it is environmentally friendly, it is the interface agent of the green frog, and it is generally the interface agent that can be brushed!

It is recommended to use tile adhesive, it is best not to use cement mortar, the viscosity of cement mortar is not enough, it is easy to fall off permanently, use tile adhesive with tile adhesive to pave, increase the friction and viscosity of the tile and the wall, mainly to increase the sticking tension of the back of the brick and the wall!

To put tiles on the wall with putty, you need to remove the wall putty, put a hemp hole and then brush the wall to fix the wall tiles. The best thing is not to play with the wall solid, but to brush the tile adhesive (it is recommended that you use Henkel Black & Decker tile adhesive) The wall surface of the wall can be directly tiled. If the bricks are too heavy.

Tile adhesive can be considered.

If your wall is too slippery after painting. The wall can be brushed with cement slurry to make the wall rough. Late tiling can increase friction.

It is better to do it when plastering, sprinkle water. If the plastering strength is not enough, there is no experience in whether the wall solid and cement are compatible, if the wall is brushed, for the sake of insurance, it is best to treat it with an interface agent before pasting the wall tiles.

Brushing is to enhance the firmness and friction between the wall and the later tiles, and it is necessary to judge whether it is necessary to look at the original wall condition. The strength of cement mortar is low or the wall is too smooth, and the wall needs to be brushed and brushed; If the brick is pasted on the waterproof layer, it should be brushed.

At this time, it is better to directly paste the brick, if you pull the hair first, the brick may not stick tightly.

After the wall is fixed, the process required to use different tiles according to different walls is also different, and it is necessary to decide whether to paste tiles or take a nap first according to the actual situation. The first case, the kitchen wall. Generally speaking, in most houses, the walls of the kitchen are made of cement mortar, so it has rough walls.

<> If the wall is treated well, the wall tiles can be used without wall solidification, which is a kind of wall base interface treatment material, which can be used to do a good job of base treatment for the base surface of the tile to be pasted, and can enhance the adhesion between the tile and the pasting base surface.

Cement grout can be used for wall tiles, and the strength of the marking is high, so there is no need for wall solidification.

What is Wall Solid?

It refers to the wall surface to be sealed and cured by painting the wall before the construction of the wall begins. The wall solid product plays a role in the wall coating process, brushing the wall solid, it will form a vine-like penetration on the cement wall, solidify the dust, and form a micro-hair-making interface layer on the surface after dry solidification, increasing the affinity of the cement wall. Wall reinforcing agents effectively seal the substrate, improve interlayer adhesion, ensure coating performance, and provide comprehensive protection for walls and floors.

The wall solid also has a certain moisture-proof and mildew-proof function.

01 Close the base layer to prevent hollowing.

The putty on the wall was scraped, but it didn't take long for it to start to return to the moisture, hollowing, cracking, and seriously affecting the beauty of the wall, and the main culprit was because the wall was not made as an interface agent.

02 Strengthen the base surface to prevent ashing.

The wall tiles have been pasted, but after a period of time they begin to hollow, and they will fall off when they are serious, because the base layer is not treated, and they begin to alkali, and the adhesion is not enough to cause the bricks to fall.

03 Substrate treatment to prevent mold.

In many cases, the wall putty will be moldy, and the anti-mildew putty is obviously used, but it will still be moldy, because the base layer is not pre-treated.

Before pasting the wall tiles, there is no need to brush the wall solid, and the bottom surface of the wall tiles is generally rough and easy to stick.

After brushing the wall, you can directly paste the tiles, because it is easy to fall, and you need to do a good job of waterproofing and brushing before you can paste the tiles. After waterproofing, you must do brushing, otherwise the tile will not be firmly pasted, and it will fall down after a long time. Some people say that the use of tile adhesive instead of cement mortar, that is, the so-called new thin paste method, does not need to do brushing treatment, such a statement is incorrect.

In addition, the brushing after brushing the wall needs to be dealt with, because the smooth wall tiles are not very stable and firm, otherwise the source of early laughter will affect the overall aesthetic effect.