Which is better to use wall solid interface agent for interior walls?

Which is better, wall fixing or interface agent?

The interface agent and the wall solid in the decoration process are the same, mainly used for the wall base interface treatment and the base cement hair treatment, and the main raw materials for its production are the same.

The only difference is that the interface agent is white latex liquid, and the wall solid is yellow latex liquid. Speaking of wall solidification, let's talk about the ground solid. Wall solidification and ground solidification are the upgrading and evolution products of interface agents, which can be used for both wall and ground base treatment.

The appearance of the wall solid ground solid is subdivided into wall and ground base treatment materials, and the wall solid is used for the wall base treatment, and the ground solid is used for the ground base treatment, and the color is "yellow wall green space", that is, the yellow wall solid and the green ground solid. Wall solidification is actually a kind of interface agent, which plays the role of connecting the upper and lower levels, consolidating the substrate and allowing other substances to cover it. If there is some powder on the interface to be processed, it is still possible to use its back cover.

I think it should be okay to use wall solid interface agent for interior walls, as long as it can be reinforced, this should be very safe.

Dear, the wall is better. The reasons are as follows: 1. The color is different, the biggest difference between the interface agent and the wall solid is the color, the interface agent is milky white, and the wall solid is yellow, which is easier to distinguish and not easy to make mistakes when used, and it can also be removed after painting to see if there is any missing place.

2. The concept is different, wall solid is a new type of concrete mixture, which belongs to the treatment material in the modified emulsion, while the interface agent is the treatment material of the concrete interface, which has the advantages of high performance and environmental protection, and replaces the traditional construction glue. 3. The function is different, the wall solid is mainly for the targeted treatment of the wall base and cement wool, while the interface agent is used for the base treatment between the wall and the ground, which has the advantages of good air permeability and oxidation resistance, so it is not the same in the scope of use. When to brush the wall solid?

1. The cement base of the wall. When you just enter the site, you can paint a layer of wall solidity on the wall, which can solve the looseness of the wall and ensure the firmness of the wall. 2. Renovation of tile surface.

Use the concentrated liquid of the wall solid to mix 1:1 with water, and then mix it with cement 1:1 to mix evenly, use a roller to roll coat and make wool on the surface layer of the tile, and carry out the renovation process normally after drying. 3. Before the construction of latex paint.

The normal construction process is to paint a layer of wall solid before painting latex paint to ensure the firmness of the base layer, which can replace the transparent primer, and the construction of latex paint or wallpaper can be carried out after drying. 4. Paint surface renovation. Evenly remove 80% of the area of the wall paint and expose the putty layer, then mix the wall solid 1:1 with water, brush a large area and dry it before proceeding to the next step.

What is the difference between interface agent and wall fixing?

The characteristics are not the same:The occurrence of interface agent is a low-carbon, environmentally friendly, high-performance cement molding raw material that replaces the traditional building glue, and the appearance is milky white adhesive, which is mainly used in the treatment of the base layer of wall pavement pages and the wool making solution of smooth bottom concrete. Wall solidification is a new type of concrete polymer modified moisturizing emulsion solution raw material that has occurred in recent years, with a light yellow adhesive appearance, which is mainly used in wall base layer solution and smooth bottom concrete hair making solution.

The biggest difference between the interface agent and the wall solid depends on the color tone, the waterproof putty is a white latex liquid, while the wall solid is a light yellow natural latex liquid. The specific advantage of using wall solid in decoration is that the wall after the wall solid brush is light yellow, and it can be clearly found whether the wall is missing or less painted, so as to avoid endangering the quality of decoration due to missing coating.

Which is better, interface agent or wall reinforcement?

The effect of wall solidification is better, the biggest difference between the interface agent and the wall solidification depends on the color tone, the waterproof putty is white latex liquid, and the wall solid is light yellow natural latex liquid. The specific advantage of using wall solid in decoration is that the wall after the wall solid brush is light yellow, and it can be clearly found whether the wall is missing or less painted, so as to avoid endangering the quality of decoration due to missing coating. The efficacy of interface agent and wall solid in the decoration process is the same, mainly used in the wall base page solution and the bottom concrete wool solution, and the key raw materials for its manufacture are the same.

The only difference is that the waterproof putty is white latex, and the wall is pale yellow natural latex. When it comes to wall solidification, let's talk about ground solidification together. Wall solid and ground solid are the renewal and evolution of interface agents, which are not only suitable for wall base solutions, but also can be used for pavement base treatment.

The occurrence of wall solid ground solid is subdivided into raw materials for wall pavement base treatment, wall solid is used to solve the wall base layer, ground solid is used to pavement base treatment, and the color is "yellow wall green space", that is, yellow wall solid emerald green ground solid. In fact, the wall solid is a kind of interface agent, which plays the role of connecting the past and the future, tamping the substrate and allowing other chemicals to cover it. If there is some dusting on the page you want to solve, you can still use its title page.

The wall solid has good hydrophilicity, which can fully penetrate the surface of the underlying material of the wall, use glue to make the rural base compact, improve the adhesion of the page, enhance the bonding strength of mortar or putty powder and the surface of the wall, and avoid the hollowing of the wall. It is suitable for the compactness of the bottom layer before the brick-concrete structure wall stucco is divided into batches of putty. Wall solid can improve the adhesion of the smooth bottom layer, and is an upgraded enterprise product of traditional Chinese building waterproof putty.

It is also suitable for the bonding of wall coverings and wallpaper. Because the sizing is convenient, the adhesive paper is thin, and the initial adhesion is suitable, especially suitable for the bonding and leveling of wall cloth and wallpaper, which is not easy to cause dead folds and wrapping.

First of all, the color of the two is different, and the function is also different, if it is strong, it is mainly used for the construction of some walls and the ground with good permeability, and the interface agent is a material treated with cosmic cement brush, which can improve the surface of the wall; I think the effect of strengthening will be better, in fact, it depends on the choice of the decorator, and which one is suitable for your own house.

The colors of the two are different, the stubbornness is different, the methods and places used are also different, and the practicality is also different; The effect of strengthening is better.

The way of use is different, the material is different, the color is different, the use technique is different, and the combination strength is different. I think it's better to be stronger.

Wall solidification and interface agent are the same thing, which is used to deal with the bottom wall, if the wall bucket is useless. Of course, the latex rubber is not good.

How formaldehyde is contained.

But the milky gum is not used at all.

It is also impossible, it is better to use water.

There are differences between interface agents and wall fixes in terms of materials, colors, and properties. 1.Materials used:

The interface agent uses vinyl acetate-ethylene as the raw material, which is a kind of Xiangnazhen adhesive; The full name of wall solid is wall curing adhesive, which is made of more environmentally friendly materials and is a high-performance interface material. 2.Color:

The interface agent is a white latex, and the wall solid is a yellow latex, and the color is different after being painted. The wall is yellow after painting, and it can be clearly found that there is a leakage of paint. 3.

Performance: The interface agent is to change the physical properties through various physical and chemical actions, and has the advantages of good air permeability and aging resistance; Wall solidification is to improve the interface adhesion by infiltrating the surface of the object, which has the advantages of high rough performance, green environmental protection and so on.

Nippon's wall is better.

Wall solid is a wall curing adhesive, which is a substitute for 108 glue and interface agent, and is a green and environmentally friendly, high-performance interface treatment material. The wall solid has excellent permeability, which can fully infiltrate the surface of the substrate, make the base layer dense, and improve the adhesion of the smooth interface. The wall solid is non-toxic, tasteless, and is a green and environmentally friendly product.

The surface of the base layer should be solid and free of floating ash and oil stains. Substrate interface treatment: dilute the wall solid with 50 60 water and apply it to the substrate with a roller brush and apply it 1 to 2 times. Wool making: Mix cement and wall solid into a paste, and apply it to the base layer with a tool.

After the wall is smeared and dried or "hair-making" curing and drying, you can start plastering or scraping putty, add cement mortar with 1:1 cement mortar, and wipe it on the back of the tile for leveling and compaction, the mortar is carried out from top to bottom, and the flatness is checked with a ruler at any time.

When bonding wallcovering and wallpaper, if the viscosity is high, a small amount of water can be added to dilute it, and water should not be added to "make hair" with wall solids. Consumption: Theoretically, 1 kg of wall solid can be coated with 10 square meters (one time), and the actual amount is determined by a variety of factors in construction.

See what you're using them for. Wall solidification and interface agent are functions like glue, the main role is to increase the adhesion of wall putty and wall, so that putty powder and wall surface stick more firmly, they are a substitute for glue. If the wall is desanded and slag removed, these two materials can only treat the symptoms but not the root cause.

If the wall is sandy, there is a special material to solve this problem, that is, the wall sand removal repair solution.

Hope it helps.