What is the difference between LQ1355 and ER50 6?

I just checked for you that these two features are exactly the same, but the appearance is different.

There is no difference between the two, because the biggest difference is probably that the diameters of the two are just different.

I think the biggest difference is that the two are different in how they are used.

The difference is the material difference between the two, and the welding ports of the two are different.

Their diameters are not the same, because the first diameter is a little thicker and the second is a little thinner.

The difference is that their models are different, and the contact is different when welding.

Express line LQ1355 and E250-6, the difference between them should be 1355, its function will be a little more complete, but it is also a little more expensive.

Sweat glands, their size and diameter are not the same, that is to say, the welding machine used is not the same.

The basic raw materials of these two materials are not the same, so we must pay attention to this aspect, in this case, we must pay attention to their copper content is not the same.

Hanxian LQ1355 and EQ506 are different, and the materials they use are not the same.

Well, what are the two types of district votes now, and the difference between the two is relatively large, after all, their specifications and their efficacy are different.

The difference between sweat gland 1355 and 506 is that they differ in performance, the latter is more advanced, and it will perform more.

The difference between the two types of seafood is determined by the different welding methods and the different materials and materials used.

Of course, there's a difference, and you can find some more professional people and ask them to tell you what the difference is, and let them explain it for you.

The difference between these two is not particularly big, and his method of operation is slightly deviated, but it can be operated normally.

What is the difference between Q1355 in one R50-6? The difference between the two is the number of weld joints.

Hello, these two have different widths. You can choose according to your actual situation.

LQ1355 all-in-one ARE50-6 sheets, remember that if it is not reflow soldering, there should not be much difference.

The difference between Hanxin and 12506 is that their currents are different.

What is the difference between 1355 and motion 50-6, I suggest that the difference is very big, and it is recommended that I am in the pig related to it.

What if you're a traitor? Well, the model is different, but it is probably the same for his grandmother.

The comparison between Doudou and Beanie is still much worse, and you are completely different in terms of specific details.

The level may be different for some parameters or some performance. Now.

What is the difference between these two models of sweat glands? It's like the difference between them is still relatively large, after all, the efficacy of the two of them is not the same.

What's the difference between them? I don't know much either, I suggest you ask about the material identification of welding consumables**, and they will tell you.

You go to the north of the north is simple, if this seaside place is elaborated, make the effort a little different, put this product.

To find out this, you can see the introduction on the official website or find a professional welding personnel to understand.

What are you**? I think there is really a difference in this parameter, and if you want to make a difference, you can do it.

The corresponding letters in the ER50-6 welding wire represent the following meanings:

ER stands for the welding wire, 50 indicates the minimum tensile strength of the deposited metal (more than 500MPa), and indicates the classification code of the chemical composition of the welding wire.

The composition of the welding wire (%)c is; mn is; SI is; p≤；s≤；cu≤；The total amount of other elements. The copper content includes a copper plating layer.

Mechanical properties: tensile strength (b) 500MPa, yield strength (, elongation (δ5, %) 22.

Summary. Hello, it belongs to carbon steel welding wire.

What is the material of ER50-6 welding wire?

Hello, it belongs to carbon steel welding wire.

The tensile strength is greater than 500MPa, the yield strength is greater than 420MPa, and the elongation is greater than 22%. It is suitable for Q235A, B grade base metal. It has excellent plasticity, toughness and crack resistance, especially high low-temperature impact toughness.

Uses: It is used for manual tungsten argon arc welding and arc welding of pipelines in various positions, and satisfactory welding joints can be obtained. Carbon steel and some low-alloy steels can be welded.

Hello, what type of argon arc welding wire and welding rod is used for Q345E seamless steel pipe, which adopts argon electric welding process.

That's what I want to ask.

Q345E adopts cold welding process with good crack resistance Weweld NG600T G alloy steel argon arc welding wire welding, ordinary argon arc welding machine DC argon arc welding is used, no preheating before welding, no insulation after welding, wide versatility, high strength matching. weweld|NG600T G argon arc welding wire is a low heat output, wide versatility, high strength general base metal strength design, with excellent welding process performance, arc stability, uniform and beautiful weld, excellent welding effect under the conditions of oil, water and rust, can weld different steels.

Can ER50-6 welding wire weld Q345E seamless steel pipe?

You can weld, if you use carbon dioxide to protect you, choose the welding wire as: ER50-6 (this is the national standard number) with carbon dioxide gas or 80% argon + 20% carbon dioxide;

But the effect is not as good as the first one.

I use full argon protection, using argon electric welding process, it is better to use ER50-6 or use weweld|NG600T G argon arc welding wire is good?

The latter is better. The former can also be used, it should be noted: the welding wire of ER50-6 can be used for priming.

E5015 electrode for surface and surface and filler layers.

Bake at 350 degrees for 1 hour before use. Use a welding rod insulation bucket and use it as you go. The purity of argon is greater than.

Thank you<>, is the J507 electrode E5015? Can you weld with J507 electrode?

Hello, yes.

The same, one is called by model, and the other is called by brand.

Summary. Hello, thank you for your consultation, about your questions, for you to answer as follows: ER50-6 welding wire is a general-purpose welding wire, suitable for welding carbon steel and low-alloy steel structural parts, while A350 is a low-alloy steel used under high temperature and high pressure, which needs to withstand higher pressure and temperature.

Therefore, if you try ER50-6 welding wire to weld A350, it may lead to insufficient strength of the welded joint, and even cracks and brittle fractures, which will affect the service life and safety performance of the welded joint. 殺

Good. Dear kiss, hello, thank you for your consultation, about Qiaogaojian your questions, for you to answer as follows: ER50-6 welding wire is a general-purpose welding surplus wire, suitable for welding carbon steel and low alloy steel structural parts, while A350 is a low alloy steel used under high temperature and high pressure, which needs to withstand higher pressure and temperature.

Therefore, if you try ER50-6 welding wire to weld A350, it may lead to insufficient strength of the welded joint, and even cracks and brittle fractures, which will affect the service life and safety performance of the welded filial piety pants joint. 殺

Dear , hello, thank you for your consultation, about your questions, for you to answer the following: it is recommended to use a welding wire or welding process specifically for the material when welding A350, to ensure the quality and reliability of the welded joint. At the same time, before welding, it is necessary to fully detect and pretreat the welding materials to reduce the problems that may occur in the welding process.

What grade of welding wire is needed for A350.

Kiss, and excite hello, thank you for your consultation on the socks, about your question, for you to answer as follows: welding A350 requires the use of E11018-M welding wire. This welding wire is a kind of low-hydrogen steel electrode, which has good crack resistance and impact resistance, and is suitable for welding of high-strength steel.

In addition, the E11018-M welding wire has excellent corrosion resistance, which can guarantee the long service life of the welded joint. 

ER50-6 equivalent: AWS ER70S-6 ISO 14341-AG38 3C1 4SI1 AG42 4M21 4SI1

Uses: It is used for the welding of carbon steel and low-alloy steel structures of the corresponding strength level, and can be used in construction machinery, shipbuilding, vehicle manufacturing, petrochemical and other industries, especially in the locomotive and rolling stock manufacturing industry.

Features: ER50-6 welding wire is 500MPa grade carbon steel welding wire, using CO2 or AR+CO2 gas shielded welding, the welding spatter of the welding wire is small, the forming is beautiful, the deposition efficiency is high, and it can be used for all-position welding.