If you want to make a glass handicraft for your wife, where is the best place to make handmade glass

You don't do this out of glass. The melting point of waste glass is 1200 degrees, and it takes about 1400 degrees to burn glass with raw materials. It is estimated that the iron pass has burned down.

It is best to use a graphite crucible to find some ammonia bubble bottles, which are small glass bottles used for injections in hospitals. After the glass is contained, a stainless steel pipe can be put into the crucible and rotated to stick some good glass, which can be simply blown and can also be modeled with some auxiliary tools. After it is done, it should be annealed to eliminate internal stress.

This is too difficult and dangerous for a person who has no foundation in glass craftsmanship. Be cautious! If you want to do it, I'll get you some high-boron glass rods to make handicrafts, you find a cutting tool with oxygen and gas, and the general welding department has burned it soft, and you can use a metal tweezers to make a shape, which is simpler.

Like you, you don't know what you can do. If you want to be a glazier, I recommend buying an alcohol blowtorch, which is not expensive, and then buy some glass tubes, glass rods or something, the thickness you choose, and you can make very beautiful glasses of various shapes with alcohol blowtorches.

Hehe, master, I want to make my own glass, admire. But it's not advisable, you don't know very well, and there is no equipment, in case of an accident, people are injured and the gains outweigh the losses, if there is a big accident, I regret my life, soda ash will not react in the iron bucket? I think it's good to buy some semi-finished products and decorate them yourself, which is also creative

The question is, landlord, what do you use to hold those materials and burn them on the stove? 1200 degrees! There are very few materials in life that can withstand high temperatures, so you'd better find a crucible.

I know that there is a gate in the amusement park, and you can do it yourself, but I don't know if there is a bookstore now, there is one in it, it has always been there, or in Sansheng Flower Township, there is a special glass blowing products.

What you want, our family is doing this, and the amount is preferred.

Hello friend, it is recommended that you start from the other person's taste and choose a gift according to her taste.

Made of stainless steel, anti-theft, safe.

Question 1; The two types of glass of the same material can be fused by heating at about 800 degrees Celsius. Glass tubing included. Glass rods, float flat glass. It is best to use glass with good material properties. It should be available in markets in larger cities.

Question 2; As I just said, as long as the material properties are the same, two pieces of glass can be fused together when heated evenly at the same time. As long as it does not violate the specifications of the glass processing process, there is no danger. The internal stress of the product is relatively large, which is eliminated by the annealing process.

Question 3; In general, the flame polishes the surface of the glass and makes it brighter. If it loses its luster, it can be chemically polished with fluoride plus sulfuric acid.

I'm not a master.

Why not use PVB film to bond glitter glass? DuPont in the United States, Sekisui ...... JapanIt's a mezzanine!

The light transmittance is almost not reduced, the strength is strengthened, and the safety glass.

Just find a few renovation companies to make a plan.

Since you are making glass crafts, you should find a decoration company with strong design ability.

Broken glass crafts.

Are you referring to mosaic glass?

One effect is to express a Mediterranean-style vase by pasting a mosaic-like stained broken glass to the surface of the glass bottle through clear glass glue. The effect is quite good.

Maybe you can be more specific with your question.

Most of the broken glass is melted and reprocessed, and glass is a renewable energy source. For naturally split glass, due to the sharp edges, it is not suitable for direct processing into handicrafts.

Methods and processes:

a.selection of glass blanks;

b.Wet grinding one surface of the glass billet with emery;

c.Clean; d.With glue, the raw materials are bone glue, kraft glue, and reused glue in proportion to form a glue shape, and set aside;

e.the glue prepared aforesaid is coated on the surface of the glass blank;

f.The glass billet coated with glue is placed in a 19 24 indoor environment with a humidity of 20 30 for 8 12 hours;

g.Low, medium and high temperature treatment, first place the glass blank in the indoor environment of 20-22 for 2 4 hours, keep the humidity at 20 30, then raise the indoor temperature to 28 30, reduce the humidity to 10, and the duration is 4 6 hours, and then raise the room temperature to 45 50, reduce the humidity to zero, and the duration is 3 5 hours, and obtain the ice glass after the glue layer naturally bursts, and the film that bursts off is reused as reuse glue.

Glass crafts].

Glass handicrafts, also known as glass handicrafts, are products with artistic value that are processed by hand from glass raw materials or glass semi-finished products. It fully embodies the creativity and artistry of human beings, and it is higher than life.

Does it still make sense to cut it into pieces? Will you keep it for a long time? You can take your picture and make a craft in various sizes like Aleng. You can do anything.

**The content should be full and clear, and the glass jar should be filled in a regular order.

The three-dimensional paper rolling work is organically combined with the color and content of the photographic work.

It's up to you.