The floor tiles can not be wiped off when they seep into the dirt, what are the tips for cleaning an

Floor tiles can not be wiped off by the dirt, tile cleaning and maintenance skills: the treatment method of floor tile loss and decontamination is usually divided into two types, among which there is a common one, is to choose a multi-functional cleaning paste to clean, wipe the cleaning paste on the dirt, and then scrub with a brush after 15 standstills, and rinse it with warm water. Using the method of organic chemical fading, the more professional passivator is sprinkled on the dirty area and gently rubbed, which can make the dirt that penetrates the floor tile gradually lighten.

However, if the dirt has already penetrated deeply, it should be solved by applying a passivating agent for a long time until the melanin fades and then change a little cold water to clean it up.

Small edible salt is very destructive, its edible salt can not only be used for condiments, but also to remove stains, if you accidentally stain the wooden floor, immediately sprinkle the edible salt, after more than ten minutes and then sweep off the vinegar milk and coal ash, everyone can use fermented milk, plus rice vinegar, wipe on the stains, you can remove the stains, and it is very bright, you can also use coal ash to wipe the stains and oil stains in the wooden floor, you can quickly clear and clean and tidy.

Edible oil, which can be removed with edible oil for the oil stains in the wooden floor, the ground is not only easier to remove, but also has the effect of safety protection on the wooden floor. The surface cleaning tiles are stained with dirt and need to be removed in time. According to the characteristics of the dirt, select the appropriate cleaning solution to eliminate it.

The cleaning liquid with strong acid and alkali properties can effectively remove the dirt on the surface of the floor tile, but because the strong acid and alkali components may cause erosion on the surface of the floor tile, it is not suitable for frequent use, and more pH neutral detergents should be selected. Daily cleaning can be cleaned with household dish soap, soap, etc. If you sprinkle a highly pigmented aqueous solution such as black ink on the surface of the brick, you should clean it immediately.

Use soap to put a little sodium hydroxide or other or equivalent linen oil mixed with banana water, which can rub the floor tiles more smooth and delicate, and the stain removal is very strong.

Tile cleaningWhen cleaning tiles, you can use the soapy water commonly used at home to wipe it simply. 2.If you want the tile to have a brighter and cleaner effect, you can add a little ammonia and turpentine to the soapy water, with the addition of these two liquids, it will make the wiped tile brighter.

Choose dish soap, soapy water, etc. for daily cleaning; Clean the tiles with a mixture of soapy water with a little ammonia and turpentine; You can apply toothpaste to the scratch and wipe it vigorously with a soft, dry cloth to repair it.

When we find stains on the tiles, we should wipe them clean in time, for example, stains, juices, ice cream and other dirt on the tiles should be wiped clean with a rag in time. If the dirt is not cleaned for a long time, it may seep into the inside of the tile, causing us to have some difficulty in cleaning it in the future.

It may be wiped with dish soap, or it may be done with a dry rag and then with a damp cloth.

Floor tiles can be said to be indispensable in the home Yinyuan a material, to know that this material to clean is still a problem, if the method is not used correctly, not only the effect is not good, but also clean is not clean. The following will introduce to you what are the tips for cleaning floor tiles and how to maintain them correctly.

What are the tips for cleaning floor tiles.

Tip 1: Insist on daily cleaning of tiles.

First of all, to do is the most basic floor tile cleaning, then the correct way is to clean the tiles daily, it can be said that this is the best way, which can also extend the service life of the tiles.

Tip 2: Remove grease stains from toilet paper.

You must know that the kitchen generally has a lot of oil smoke, so you can consider using this method at this time, that is, stick a piece of toilet paper on the tile, and then you can consider spraying a little detergent on the toilet paper, so that the oil stains can be automatically stained quickly, and then you tear off the toilet paper so that it is much cleaner.

Tip 3: Vitamin C to remove rust stains from tiles.

Both areas of the kitchen and bathroom will often come into contact with water, so the tiles will easily produce yellow rust or limescale over time. At this time, you can consider using a few vitamin C tablets to grind into powder and sprinkle them on the rust stains, and then use water to scrub them several times.

Tip 4: Toothpaste can repair minor scratches.

Tiles can be wiped if they are dirty, so what should I do if there are some slight scratches? At this time, you can use toothpaste, just apply toothpaste to the scratch, and then wipe it vigorously with some soft, dry cloth to fix it.

Tip 5: Candle to clean tile crevices.

Apply the candle to the joints of the tiles, knowing that the surface of the candle is relatively smooth, and at the same time, it can also clean up the oil stains in the gaps. When cleaning the seams again, you can use a regular detergent to scrub them normally.

How to maintain the floor tiles correctly.

1. If you use polished bricks at home, then you must wax it regularly, generally speaking, once every 3 months is the most appropriate. If it is a gap between the bricks, then you can clean it with a stain remover from time to time, and then brush a layer of waterproofing agent on the gap with a brush, which can prevent mold growth.

2. For daily cleaning of floor tiles, you can choose some dish soap, soap, or add a little ammonia and turpentine mixture to clean the floor tiles, which will make the floor tiles cleaner and brighter.

3. For example, if there is tea, coffee, beer, ice cream, grease, etc., then you can consider using sodium hydroxide or potassium bicarbonate solution to scrub it.

4. If the liquid state is covered with some ink, cement and other pollutants, then hydrochloric acid and nitric acid can be used to deal with them.

The average family will carry out an annual cleaning, so the most conspicuous dirt should be the dirt on the floor tiles, and there are many ways to solve the stubborn dirt on the floor tiles, and the following are a few of them.

First, the method of removing oil stains.

There are many types of dirt, and that includes oil. Removing the oil stain is relatively simple, first we need to pour some vinegar into the water, and then add the rag to the water. Then use this cloth to wipe the floor tiles, the oil stain will be easily dissolved by vinegar, we can clean it again with clean water.

The role of white vinegar in it is not only cleaning, but also disinfection.

There are also some ways to remove oil stains, such as using leftover peels that can also be used to remove dirt from floor tiles. Apply some detergent to the peel to wipe down the dirty areas of the floor tiles. Then we attach the toilet paper to these floor tiles, after a while, tear the toilet paper on the floor tiles, the oil has been attached to the toilet paper, and then wash it with water several times to complete the cleaning.

Second, the method of removing water stains.

The types of dirt also include water stains, which are more difficult to clean up where the joints of the tiles are more likely to collect water stains. For this kind of water stain, we can use baking soda, put the baking soda powder in hot water, melt it, and then dip the water with a rag, wipe it on the floor tiles with water stains, and then wash it with clean water to remove the water stains. The effects of baking soda include stain removal and non-slip.

3. Methods for removing rust.

To remove rust, we can use 20 grams of vinegar and 20 ml of salt to heat in a basin of water, then add ginger vinegar and salt to mix, use a rag to wipe the mixed on the rusty floor tiles, keep it for half an hour and wash it with water, you can remove the rust. You can also use vitamin C to remove rust, crush three to four grams of vitamin into foam, and then sprinkle it on rusty floor tiles, and then wash it with water.

To sum up, there are many ways to remove floor tile stains, and you can give it a try according to the methods listed above.

Method 1: Dish soap can be used for daily cleaning of floor tiles. 2. Clean the floor tiles with a mixture of soap and a little ammonia and turpentine, which can make the floor tiles cleaner and brighter. 3. If tea, coffee, beer, ice cream, grease and other pollutants adhere to the surface of the floor tiles, they should be scrubbed in time, and sodium hypochlorite dilution (bleach) should be used if necessary, and soaked for 20-30 minutes before wiping with a cloth; Some stains that have been infiltrating the brick for a long time can be soaked for several hours.

It can be cleaned with some detergents, it can also be cleaned with some conditioners, it can also be cleaned with some brushes, it can also be cleaned with some disinfectant, and it can also be cleaned with some detergent to remove dirt, these are all very good ways to clean stubborn dirt.

You can choose to spray some white pigment on it, you can also spray baking soda, you can also spray a professional dirt remover, you can wipe it with a damp rag, and you can also use a mop to clean it.

Wipe it with the clean porcelain treasure sold in the supermarket, it is very clean. In the future, just wipe it with a rag.

The matte bricks are quite dark, there is no brightness, generally you just wipe it, if it really doesn't work, you go to the store to buy some cleaning agent, if there are scratches, you might as well wipe with toothpaste!

You can use Shield King tile cleaner, one is the decontamination king, and the other is the descaling king, these 2 products can remove most of the decoration stains and daily stains of matte tiles.

Matte bricks are easy to get dirty and difficult to clean, so you should pay attention to cleaning them in time when they are dirty, otherwise they will be black after a long time.

You can use the Shield King to clean the King as a daily cleaning of matte bricks.

Matte glaze is easier to absorb dirt than glossy bricks, but it will not penetrate into the glaze and can be removed with common detergents.

To clean up the dirt on ceramic tiles, it is necessary to understand the types of tiles and the nature of contaminants.

1. Pollution cleaning method of glazed bricks:

For glazed bricks, the glaze layer of the brick surface is a very dense substance, colored liquid or dirty things will not penetrate into the brick body, the pollutants of the brick surface can be removed by using a rag dipped in water or adding some washing spirit to wipe the brick surface, if it is a tile with a strong sense of concave and convex, if there is a lot of dust squeezed in the uneven gaps, use a brush brush, and then rinse with clean water to remove the dirt on the brick surface.

2. Dirt cleaning method of vitrified bricks:

For vitrified tiles, the following corresponding cleaning agents can be used to clean up the contaminants commonly used in the household:

1) Pollution type: daily cleaning.

Cleaning method: You can use a cloth, and then use dish soap and soapy water to clean it.

2) Pollution type: tea, ice cream, grease, beer.

Cleaning method: You can use soda ash solution to clean it.

3) Pollution type: sediment, rust, mortar.

Cleaning method: Use sulfuric acid or hydrochloric acid solution. Drop it on the brick surface, let it stand for a few minutes and then wipe it, taking care to protect your hands.

Amway has a special tile cleaner that works quite well! If lime, putty powder, and white latex drip off the brick surface, use a blade to carefully scrape off.

4) Pollution type: paint, drawing pen.

Cleaning method: You can use turpentine, acetone to wipe, and the toothpaste used at home also has a good stain removal effect.

5) Pollution type: soy sauce, vinegar, carbon powder.

Cleaning method: The effect of using toilet cleaner is better.

6) Contamination Type: Ink.

Cleaning method: You can use Amway tile cleaner or toothpaste.

Suggestion: If the surface of the vitrified tile is contaminated, it is recommended to use the corresponding cleaning agent to clean it immediately! `

Note: Commonly used cleaners in the home:

Toilet Cleaner, Toilet Cleaner, Toothpaste, Amway Tori Tile Cleaner, Qianyixi Ceramic Brush and Qianyixi Ceramic Stain Remover (good stain removal effect for stubborn stains).

There should be a professional cleaner, never use corrosive things to clean, FAENZA tiles are easy to clean.

Clean with Shield King tile cleaner, which is sold on the Internet, you can consult the customer service in the store for specific conditions.

1. Alcohol wiping, suitable for paint.

2. Blow with a hair dryer (hot air) and wipe it immediately, suitable for viscose.

3. Use detergent, laundry detergent and other detergents (hot water), suitable for ordinary stains.

Detergent has a special tile cleaning product, I also went to see it because I want to decorate, the owner introduced a lot of products, and finally said that it can also be used like a general brick, but the stain is not easy to remove, he took a bottle of tired car cleaner and the like and sprayed it off, so he suggested that I buy that kind of ultra-fine powder tile, the pores on it are relatively small, relatively better, but there are better.

Vinegar or toothpaste will work well.

How do you remove stains from tiles?