How to make up the gap next to the toilet sewer pipe in the new house, the cement is not easy to lea

When decorating the toilet, the waterproofing of the toilet is a very important part, and the quality of the waterproofing involves your neighborhood relationship, and also has a great relationship with your living happiness index. Before doing waterproofing, the ground should be cleaned first, and it is better if there is a hair dryer to blow it, especially where the pipes are up and down in the corners. Flat place waterproofing is very good to do.

Just brush it up. The upper and lower parts of the pipeline are the top priority for waterproofing. Before brushing the waterproofing, kick off the cement around the pipe.

Then fill it with water, smooth it, and brush the waterproof material. The waterproof material of the brush is, this part should be brushed several times. After drying, apply it several more times.

Finally, the closed water test was performed. After 24 hours of water release. Preferably 48 hours.

You take a flashlight, go downstairs, and carefully observe whether there is any leakage, especially in the corners of the walls, and around the pipes. If there is water seepage, it must be redone.

How to make up the gap next to the toilet sewer pipe in the new house, the cement is not easy to leakThe use of quick-drying cement (also known as plugging treasure) can not only fill the gaps!

It is recommended to find a decoration company to install it, the workers are professional, and they also understand these and are guaranteed.

Plumbing and building materials that sell that kind of thing, what the name forgot, a small bag, mix with water in proportion and then wipe it on.

If you do waterproofing, you can get it, what the hell are you doing?

In life, sewers often leak. First of all, it is necessary to identify the leak as soon as possible and mark it so that it can be dealt with later. In addition, it is also necessary to check what the leaking pipe is.

The treatment method of leakage of cast iron pipes in old houses and PVC pipes in new houses is different. Next, find the water control switch in your house and close the sluice gates inside your house to make sure there is no leakage. Here's how to deal with it:

If the cast iron pipe of the old house is leaking, and the water outlet gap is small or just trachoma leaking.

Then buy a bag of plug king to fill this gap. If the PVC pipe leaks, regardless of the size of the gap, it is recommended to replace the section of the pipe again to ensure that it does not leak again. If the leak gap is really small, the temporary treatment is to buy a roll of waterproof tape at a hardware store, seal and wrap the gap, and then wrap a layer of glass glue on the outside, and then wrap a layer of waterproof tape.

This solves the problem of water leakage. If the public sewer of the toilet is leaking, if it is still under warranty, you can directly contact the developer to be responsible for repairing it, and you should also compensate the owner for the loss in your home.

However, if the warranty period has expired, in this case, the public sewer can be disposed of directly through the utility company, as long as it is not caused by human factors. The corresponding loss can also be compensated through the payment of public repairs**. There are many types of water pipe leaks, and pipe wall leaks are a serious problem.

Leaking water pipes in the wall. The general reason is that the water pipes are old or susceptible to any situation, resulting in damage. Add water with a small amount of cement, stir into a paste and pour into the joints.

When the cement does not seep in, immediately mix some thicker cement to lubricate the joints. After applying grease twice, paste a thick layer of cement on the floor (wall) and try again after the cement has dried. In a very serious case, we had to dig through the walls to find the leak in the water pipes.

However, if the leak is due to a private remodeling of a sewer pipe, the owner should bear the cost of maintenance. If you cause financial damage to your neighbors, you should also bear it yourself. If a 2 cm diameter water pipe leaks, but there is no damage in some locations, first close the main valve of the main water pipe, cut off the water pipe at the leaking location, find an instrument with a thorough thread, and connect it at the interface.

An iron water pipe with a diameter of two centimeters leaked, which was caused by rust throughout the pipe. First, close the main water valve, replace the entire section of rusty water pipe, and tighten both ends with screws.

After this happens, be sure to saw off the leaking place, and then after the saw edge is flat, it should be slowly sanded with sandpaper, and then the glue is applied to this place, to ensure that there is no water leakage, pay attention to the adhesion of the interface position, and you can also directly seek the help of skilled workers.

This should be determined according to the material of the sewer pipe, if it is PVC, you can directly choose the casing, if it is a metal material, you will definitely choose the way of holding the hoop.

It can be treated with glue, or by maintenance and waterproofing work, and the effect of the treatment must be guaranteed.

If it is a PVC water pipe, it is recommended to buy a PVC water pipe and connect it yourself. First cut the broken pipe, put the interface into one end of the pipe, so that the cutting position of the other end is just flush with the other opening of the interface, so that it can be straightened, and then send it directly to this end, so that the two ends have a certain cross-connection distance, then take it off, and apply PVC glue on the inside of both ends and the outside of the two downspouts.

You can buy waterproof tape to repair the downpipe, go around it a few times, and then wipe it with mortar waterproofing agent and cement. In the case of downpipes made of cast iron pipes or other materials, the hoop method can be used in case of emergency. When holding the hoop, the pipe wall needs to be filled with rubber to prevent water seepage.

Kitchen drainage should be done with care. It needs to be designed according to the area and width of the kitchen. If you pass by a hotel, you have to install a floor drain.

A downspout is installed at the location of the stove to facilitate dishwashing and pot washing. Disconnect the water source and loosen the connector. If the wire mouth leaks, it can be removed.

If the leakage is not large, a set of agricultural machinery glue can be purchased for mixing and filling. If it's a metal joint, either tighten it. If it doesn't work, just remove it, add some raw belt, and tighten it again.

If the bond or fusion is aging or leaking is difficult, it is best to replace it with a new one. If you have limited tools and skills on your own, you can find a professional repairer to fix it.

A large area of leaking steel pipe is leaking. Cut off the leaking part and re-weld a section of steel pipe or repair a steel plate with the same curvature and similar thickness at the crack. Derusting treatment should be carried out before welding, and anti-corrosion treatment should be carried out after welding.

Cast iron pipes are a type of hoop crack. Steel casing can be added, and then green lead, oil hemp and asbestos cement can be inserted between the steel casing and the iron pipe. If it is a longitudinal crack, small holes should be drilled at both ends of the crack to prevent the crack from propagating, and casing treatment can be added.

The pipe section with more cracks can also be cut off and treated with casing. A steel bar is welded at the inner wall of both ends of the casing L 5 20mm, the diameter of which depends on the clearance, which can prevent the filler from falling into the pipe and make the filling gap even.

It is recommended to buy a PVC water pipe to connect it yourself, first cut off the broken pipe, put the interface into one end of the pipe first, so that the cutting position of the other end is just flush with the other opening of the interface, so that it can just be straightened, and then send it directly to this end, so that both ends have a certain cross connection distance (length) and then disassemble it, and use PVC glue to apply it to the inside of the two ends and the outside of the two sewer pipes.

When installing sewer pipes, it is easy to leak water in the gaps, and if a leak occurs, it is necessary to repair it. Failure to do so may result in a more serious accident.

If this happens, then I think we have to deal with this problem as soon as possible, and then we can fix the gap for him.

Summary. If it is a PVC water pipe, you can buy a PVC water pipe to connect it yourself, first cut the broken pipe, put the interface into one end of the pipe first, so that the cutting position of the other end is just flush with the other opening of the interface, so that it can be straightened, and then send it directly to this end, so that both ends have a certain cross distance (length) and then disassemble it, and use PVC glue to apply it to the inside of the two ends and the outside of the two sewer pipes.

Good afternoon. We are collating the answers and will get back to you right away.

Thank you. If it is a PVC water pipe, you can buy a PVC water pipe to connect it yourself, first cut the broken pipe, put the interface into one end of the pipe first, so that the cutting position of the other end is just flush with the other opening of the interface, so that it can just be straightened, and then send it directly to this end, so that both ends have a certain cross distance (length) and then remove it, and use PVC glue to apply it to the inside of the two ends of the direct clear talc and the outside of the two sewer pipes.

You can also use the plugging king.

Mortar King: The plugging effect is very good.

You can buy waterproof tape to repair the sewer pipe, just wrap it up, and then use mortar waterproofing agent and cement to wipe it on.

I was doing a renovation at home last year, and I also encountered this situation.

The back is used to fill the leakage with mortar king and cement, and after it dries, it is waterproof in the brush.

I dug the ground by myself and plugged in a sewer pipe, and the mouth of the pipe was around the ground and there was a little gap leaking. <>

Add a secondary drain by yourself, right?

My house too, made a hole in the toilet and plugged it into the water pipe and did a secondary drain.

There is also a little gap in the back of the Plugging King and the Mortar King.

The effect is even better, my relatives are doing this, indoor leakage.

Summary. Dear, hello, I'm glad to answer for you, there is a gap between the bathroom floor drain and the sewer pipe to cause water seepage treatment method: 1. Bathroom floor drain water seepage is still relatively common, generally because the concrete around the floor drain buckle pipe is not dense enough, and the waterproof of colleagues is not in place.

2. In fact, this problem is easy to solve, as long as you use cement-based waterproofing agent, you can deal with it in half a day. 3. Construction steps: first find a chisel and use a chisel to open a 2 3 cm wide annular groove around the floor drain.

The depth is about 3 cm. However, if there are loose or gaps around the pipe during the slotting process, it should continue to be chiseled. Until the above situation is cleared up.

Then clean the groove with a clean water brush. The cement-based waterproofing agent is filled with a paste and then used to collect water (within half an hour) when the waterproofing agent is collected, and then compacted and wiped with a press. Ensure that there will never be leakage from the floor drain opening.

4. If the operation ability is relatively weak, you can directly find a professional to operate. Directly ask the property worker for help, or directly ask the decoration company to send someone to check the cause and deal with it.

What should I do if there is a gap between the floor drain and the sewer pipe in the bathroom and cause water seepage?

Dear, hello, I'm glad to answer for you, there is a gap between the bathroom floor drain and the sewer pipe to cause water seepage treatment method: 1. Bathroom floor drain water seepage is still relatively common, generally because the concrete around the floor drain buckle pipe is not dense enough, and the waterproof of colleagues is not in place. 2. In fact, this problem is easy to solve, as long as you use cement-based waterproofing agent, you can deal with it in half a day.

3. Construction steps: first find a chisel and use a chisel to open a 2 3 cm wide annular groove around the floor drain. The depth is about 3 cm.

However, if there are loose or gaps around the pipe during the slotting process, it should continue to be chiseled. Until the above situation is cleared up. Then clean the groove with a clean water brush.

The cement-based waterproofing agent is filled with a paste and then used to collect water (within half an hour) when the waterproofing agent is collected, and then compacted and wiped with a press. Ensure that there will never be leakage from the floor drain opening. 4. If the operation ability is relatively weak, you can directly find a professional to operate.

Directly ask the property worker for help, or directly ask the decoration company to send someone to check the cause and deal with it.

Dear, if my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

1. If there is a leakage problem in the public sewer pipe of the bathroom, if it is still in the warranty period, you can directly find the developer to be responsible for the repair, and the loss in the owner's home should also be compensated. However, if the warranty period has expired, in this case, because it is a public sewer pipe, as long as it is not caused by human factors, it can be directly dealt with through the property management company. The corresponding losses can also be compensated through the payment of public repairs**.

2. However, if the leakage is caused by the private renovation of the sewer pipe, the owner should bear the cost of maintenance. If you cause financial losses to your neighbors, you should also bear them yourself.

Answer: Fill in the bathroom pipes and joints. First shovel the putty layer and mortar layer around the water pipe, when the shovel is not moving, you can see the cement floor layer, and use a shovel to shovel the gap of the water pipe, which is the joint between the water pipe and the floor layer. Waterproof Guard 1 with black gold steel

3. Mix with water, spray thoroughly after adjustment, let the jet water flow be columnar and pressurize (the greater the air pressure, the better) to pour the waterproof guard into the gap, and spray some cement floors. Then the construction of the sealant has been completed, the sealant is poured into the syringe, glued to the inside of the gap, and the cement floor is also smeared with a layer of sealant on the weekend. Note:

The purpose of the waterproof guard is to make the internal floor slab of the water pipe form a waterproof layer, so that the water does not seep into the floor layer, so as to avoid water seepage in other floor layers. The second is to deal with it from upstairs. First, check whether the joints between the water pipe and the ground are intact, whether there are cracks or broken gaps.

If there is a broken gap, in a dry case, first clean up the loose and damaged caulking material, and then spray the tile gap with kitchen and bathroom waterproof spray, and then dry it for about 20 minutes. Hope it helps.

Hello, I hope the above information is helpful to you! Have a great day! Have a great day! 