Can the bathroom straight pipe be wrapped directly with cement?

The straight pipes of the bathroom can be directly wrapped in cement. Because pipes like this belong to the drainage riser of the bathroom. You just need to seal his mouth with concrete to prevent water leakage, and other users will not be affected.

The straight pipe of the bathroom needs to be ventilated and dried, this cement bag is not allowed, it is easy to get damp, this is not feasible.

In general, the straight pipe of the bathroom must use formal techniques and materials to achieve the ideal decoration effect, and the cement package is not recommended.

Bathroom straight pipes can't be wrapped in cement, we can use plastic. Pavilion or decorate with a layer of bread outside. In this way, if there is a problem in the future, it can be repaired.

It is best not to use the straight pipe of the bathroom directly with cement wrapping, so that it is not easy to repair if it fails.

Well, it is best not to wrap the toilet pipes with cement, because once wrapped, it is very difficult to clean up if the inside is clogged.

It is not recommended to wrap the water pipe directly with cement, it is best to use bricks to build a circle around the water pipe, and then plaster the cement, which can better protect the water pipe.

Generally, it is not recommended to use cement ladle directly, because if there is any problem in the later stage, when it needs to be repaired, it is very troublesome, and it is generally recommended to use the material of the pipe that is specially wrapped with water pipes.

The paper pipe in the bathroom can be wrapped directly with cement, but it is best to do a good job of waterproofing, otherwise it may be a little numb in the future when the maintenance is more difficult.

Can toilet paper pipes be slurred directly with cement? No, if you think the sound insulation in your bathroom is poor, you should wrap the pipe with foam and then seal it with cement.

It can be wrapped directly with cement. But pay attention to the use of cement stone. Be sure to pay attention to the nozzle. Do not lift cement into the nozzle.

Bathroom, if you want to wrap it directly with cement, you can do it, but if it is broken later, it is more difficult to repair, so it is not recommended to wrap it directly with cement.

No, because the cement is difficult to solidify, don't use cement wrapping, other materials are fine.

The toilet paper tube can not be directly wrapped with cement, once there is a problem is very inconvenient.

Can you use toilet paper pipes, can you use cement bags directly? This is not possible, if you want to be more aesthetically pleasing, or don't use a direct cement package?

The bathroom can be directly wrapped with cement, and the interior is the kind with a relatively stable structure.

Can the straight pipe of the bathroom be wrapped directly with cement? I think it's better not to use cement packs, because once it breaks, it can't be repaired, so it's better to get it somehow.

Can you use water, which is possible to have a crystal pack? Of course, you can use cement wrapping, you can choose by yourself.

It doesn't matter if the sewer pipe in the bathroom is wrapped in cement, and it is normal to operate like this.

Can the clerk directly manage the water and use the cement bag directly? Yes, my mannail's nail pipe is molded with cement, let the tube be inside, and it's just right.

Let me ask this question, do you say that the straight pipe in the bathroom can be directly wrapped with cement? I think. It is best not to use cement wrapping, because after wrapping with cement, what to do if the pipe is broken? That's the problem.

This is more troublesome.

If it is damaged, it cannot be repaired.

So you can't do that.

I wonder if his brother can use cement to wrap it, and I think it should be impossible, if there is possibility.

I'm also a layman, so I can't give you an actual answer. You can consult the person who will take you into the industry or some masters.

I'm going to start this night with the long high gold treasure next to the ascension and the golden dream. So this should be very.

I don't think this is possible, there may be a special building or something, you can ask about it, or there is a decoration or something. Then you can try to see how you do it.

The straight pipe of the toilet cannot be directly covered with cement, and the use of cement package will quickly corrode the water pipe. No way.

The straight pipe in the bathroom can be wrapped directly with cement, but I think it is better to use good materials.

I don't think the bathroom pipe can be wrapped directly with cement, because that would affect him.

It can be used, and it is more space-saving.

After measuring the length of the pipe, it can be cut with a hacksaw, manual saw, or grinding wheel cutter. After sawing, the section should be kept flat, and the burrs should be removed and chamfered with a steel file.

Fine grinding of cement clinker is usually carried out using a coil-flow grinding process (i.e. closed-circuit operating system). In order to prevent dust from flying in production, cement plants are equipped with dust collection equipment. Electrostatic precipitators, bag collectors and cyclone dust collectors are commonly used dust collection equipment in cement plants.

Generally, there is no problem, and the heat expansion rate of the pipe cannot rise to the point that the cement cannot withstand it.

Wrap the sewer pipe directly with cement and then paste tiles on it to save space.

Advantages: This is equivalent to wrapping the pipe with sand mixture, the pipe will be well protected, and at the same time, it will also help to save space.

Disadvantages: It is almost impossible to peel the pipe out of the sand when the pipe wrapped in the sand mix is leaking or the inspection opening on the pipe needs to be opened. Thermal expansion and contraction, the pipe bursts, and cannot be repaired. Therefore, this problem is still for the owners to consider themselves.

The thermal expansion rate refers to the relative percentage of the change in the volume of the sample before and after heat treatment, and is suitable for solid samples with small expansion properties. Its essence is the same as the expansion multiple, but the way it is expressed is different.

Thermal expansion rate = (volume after heating - volume before heating) volume before heating * 100%.

There are 4 ways to wrap risers:

Brickwork: Constructed by masons, the pipe is first wrapped with soundproof cotton before tiling, and then with red bricks to wrap the riser.

Features: good sound insulation, strong firmness, not easy to deform, not easy to blow up after pasting the magnetic sheet.

Disadvantages: Relatively thick, takes up space.

Wooden keel plus cement pressure plate:

Features: The most previous construction method, the simplest and trouble-free construction.

Disadvantages: The wooden keel is easy to absorb water, mold, and cause deformation in the humid environment of the bathroom, which makes the magnetic sheet blow up.

Remedy: After installation, make waterproof on the root of the riser before pasting the magnetic sheet to prevent the water from the ground from flowing into the riser and soaking into the wooden keel.

Light rigid keel plus cement pressure plate:

Informal method: only three light rigid keels and two cement pressure plates are used. The light rigid keel is not made into a frame, but plays a connecting role. It's not strong enough. But save labor and materials.

Formal method: use a light rigid keel to make a frame, after Party A's supervision and acceptance, then seal the cement pressure plate, hang the steel wire mesh, and finally paste the magnetic sheet.

Features: not easy to deform, the most commonly used process in decoration companies nowadays.

Plastic gusset plate, plastic aluminum plate production:

These two methods are suitable for home decoration and want to wrap the riser. Because there is no need to fill the magnetic sheet, it is very convenient.

Plastic gusset: wooden keel plus yang angle line, directly install the gusset from the bottom to the top.

Cons: Not aesthetically pleasing.

Aluminum-plastic panel: nail the nine-centimeter board on the wooden keel, and then glue the aluminum-plastic board with all-purpose glue, with a variety of colors, close to the magnetic sheet effect.

Disadvantages: The corners of the aluminum-plastic panel are easy to crack, so thicker plates should be used.

One is to build red bricks, similar to a wall, so that the bathroom pipe wrapping method is relatively large and occupies a lot of space, and the other is to embed the bricks in the gaps between the pipe and the wall, and then all the mortar, so that the wrapping method occupies a small area and will not feel that the wrapped riser is very thick. ，

I have never seen a cement bag on one side of the brick, and it is generally a brick package.

Does the use of cement wrap refer to pouring cement into thin plates and then sticking them on the outside of the pipe?You don't need to paint again with cement board, you can paste tiles after wrapping, and you need to paint with bricks. However, the cement slab needs a site for pouring, and a certain amount of maintenance time is required after pouring, and the construction period is long.

With bricks, tiles can generally be applied the next day, and the construction period is shorter. The degree of solidity is basically the same, and the bricks are a little more secure.

It is also possible to decorate the bathroom with floor tiles and then cement pipes.