How do you get rid of odors in a car that I just bought?

The best way to get rid of the odor of a new car is to ventilate it and then cover it with a peel。Most production car odors are air pollution, pollution levels, and interior decoration, so the first step should not be to consider masking odors. Car top fittings, PU seats, plastic decorative panels, floor glue, adhesives and other parts generally have the problem of excessive formaldehyde, benzene and volatile organic compounds, which will volatilize efficiently under sunlight heating, and the smell of the car mainly comes from these substances.

The air quality of the original car is very poor, so the first thing that is not recommended to be done in the later stage is not to apply film, do not use inferior car perfume, do not lay glue, a set of mat ventilation can be, and these auto parts also seriously exceed the standards of bad products.

When you buy a new car, you should pay attention to ventilation, and you should pay attention to air circulation when you buy a new car, so that some smells are done, but this method takes too long, so you have to borrow some tools, such as bamboo charcoal bags or activated carbon bags are a good deodorization tool. The key to removing odors from carbon bags and activated carbon is that carbon adsorption is better, and many water purifiers also use bamboo charcoal or activated carbon to adsorb harmful substances. In contrast, there is also a faster way to use a car air purifier.

Just like the air purifier in our home, it employs active purification. Inhale harmful air and release purified air, relatively quickly. Especially for new cars, it will be better to let the air purifier work for a while and then let the family get in the car.

Due to the different materials used in new cars, the smell size of cars also varies greatly. Generally speaking, the materials used in high-end cars are of relatively good quality, and the smell of the car is much less, while the smell of the car will be stronger due to the cost factor, and the materials used in the low-end cars are relatively cheap. So, where does the smell of cars come from?

We know that a car has thousands of parts, including metal parts, plastic parts, leather, fabric, various greases, various filling materials, paint, etc. These materials will produce some different degrees of plastic parts, especially plastic parts, and the smell of paint materials comes from? We know that a car assembles thousands of parts, including metal parts, plastic parts, leather, paint, paint, etc.

These different degrees of materials will produce some different odors, especially plastic parts, will produce some odors, especially the smell of plastic parts, paint material parts, and many cars mainly use toxic owners are low-end asphalt, these owners will use toxic **, not only low-end asphalt, but also will use toxic asphalt, and will use toxic asphalt will also use toxic asphalt as toxic owners recently**, and will use toxic toxic asphalt.

Car odors are unavoidable, but we should still take care to volatilize the odor as soon as possible. Usually, we can open as many windows as possible for ventilation, which favors the volatilization of harmful gases。You can also put some activated carbon bags in your car to help absorb harmful substances, and you can also install a car air purifier that also has a certain effect.

Activated charcoal can be used to remove odors, grapefruit, pineapple, lemon, etc. can be used to remove odors, vinegar can be used to remove odors, and windows can be opened for ventilation to remove odors.

It can be ventilated, and some purifying agents can be put in it to effectively remove odors.

You can open the doors and windows, put the charcoal bag in the car, put some fruit in the car, and put the vinegared water in the car.

1. The most environmentally friendly and low-cost method is ventilation, especially in the sun, which is the best choice.

2. You can also use peeled fruit peels such as grapefruit peel and orange peel, and a friend who does decoration told me to use the pineapple that is still green and not completely ripe, so put it in the car entirely, and replace it when the pineapple is ripe, so that the taste is also very fast, but be careful that the pineapple is rotten and the running water stains the car.

3. I use a thin bottle to fill some vinegar, I don't know the principle, but my colleague's car is also made like this, and I feel that it is somewhat useful.

4. Buy activated carbon packets and air purifiers and the like, but the activated carbon packets should be exposed to the sun every few months to disperse the smell, and the air purifier filter should also be replaced in time.

The smell of the interior of the car is large, mainly because of formaldehyde, and formaldehyde is mainly the seat cushion, floor mat, interior, paint, adhesive and other materials. For rapid removal of formaldehyde, photophyll material decomposition can be selected;

1. Open windows for ventilation.

Every time you open the window for ventilation before the car starts, and then leave, or usually stop the car window to flow out of a small gap, keep the car ventilated, which can effectively reduce the concentration and odor of harmful gases in the car.

2. Place activated carbon.

There are car-only ones. Yeguang mud can play a key role in the adsorption and decomposition of formaldehyde.

Three: herbal formaldehyde method: with some herbs extracted photophyllin, this method can be quickly and pollution-free removal.

Fourth, place the peel of the fruit.

When the smell in the car is very strong, you can put some fruit peels or fruits in the car, so that the aroma of the fruit can cover up other unpleasant odors in the car.

What should I do if I buy a new car and the smell in the car is heavy? Try these methods to get rid of odors.

One: It does not cost money to open the window for ventilation, and the effect is not significant.

2: Economical placement of activated carbon, the effect is slow.

Three: the use of luxury intelligent car air purifier with large CADR value purifier has no effect depends on its various CADR values, the larger the effect, the better, for example, fast air intelligent car air purifier formaldehyde CADR value of 55 cubic meters per hour, benzene CADR value of 43 cubic meters per hour.

Hya-Pure only has a CADR value for the removal rate and none of the items.

After buying a new car, how to get rid of the odor in the car?

Compared with the owners of the new car, they are very happy, but they are not happy when they open the car, why? Because the smell inside the car is too strong, stay in the car for a long time, these smells will make people dizzy, the smell of the new car is generally ** in leather seats, interior panels, tires, seat belts and other components, the president will talk about how to get rid of the odor. Method 1:

Opening windows for ventilation is simple and most effective.

Because the windows are airtight, especially in the sun, the interior parts of the new car will volatilize a variety of odors, the most reliable way is to open the windows and trunk, ventilation This is the most effective way to remove it.

Method 2: Place activated carbon packets and sachets in the car.

Although opening the window for ventilation is the most effective method, but everyone usually parks the car in the parking lot, and can not keep an eye on it all the time, so it is impossible to open the window for ventilation for a long time, so we can only retreat to the next best thing, choose the Yeguang mud activated carbon package to absorb the odor in the car, and this method is very cheap and effective. However, it should be noted that remember to replace the activated carbon pack regularly, as the carbon pack will become invalid after a long time.

Method 3: Place orange peel and lemon peel.

After eating grapefruit and oranges, do not throw away the peel, you can put the orange peel in the car. Lemon peel removes odors, which is the most natural and environmentally friendly way to remove odors, and is much stronger than air fresheners with additives.

Method 4: Try not to buy decorations.

The peculiar smell in the car is mainly the volatile organic compounds slowly released from the leather, paint, and viscose, including the asphalt damping sheet that made a lot of noise before, and the raw materials are also one of the best.

There is also the "boutique decoration", including the whole car mat, film, pendant, incense tablets, these things will also release a large number of harmful gases.

Reduces odors**.

Peel off the plastic protective film of the new car.

First of all, after you buy the car, it is recommended that you immediately remove all the plastic protective film in the car.

Because they themselves produce "odors", and because each part is covered by a plastic protective film, the odor cannot be dispersed as soon as possible.

Therefore, don't be so reluctant to tear off the plastic protective film when you buy a car, and remove these plastic films in time when you get a new car to reduce pollution in the car.

After tearing off the plastic film, you can find a damp rag to clean the seat and other places, formaldehyde is easily soluble in water, which can remove most of the formaldehyde remaining on the outside of the leather.

Eliminate existing odors.

After the new car leaves the factory, the volatilization time of harmful substances in the car needs to be at least 6 months (the release cycle of formaldehyde may be longer), and the parts in the car such as seats, carpets, and wiring harness rubber will produce harmful chemicals to the human body.

Method 1: Open windows for ventilation.

Frequent opening of windows for ventilation is the most direct method, which can accelerate the air circulation in the car and help to eliminate odor and formaldehyde in the air in the car.

If the weather is particularly good, it is a better choice to open the window for a ride and speed up the ventilation.

Method 2: Exposure to the sun + ventilation.

Park the car in the sun for a sun, exposure can increase the temperature in the car, and the rise in temperature can significantly accelerate the volatilization rate of pollutants such as formaldehyde.

Of course, this can only increase the rate of evaporation of pollutants, reduce the concentration of pollutants in the car, and release them into the air, rather than completely eliminating them.

Method 3: Put activated carbon or formaldehyde paste in the car.

Activated carbon is a material with adsorption function, which can effectively adsorb harmful gases in the air, such as gas masks contain a certain amount of activated carbon.

We put the activated carbon package into our new car, which will adsorb and eliminate the toxic gases in the car.

Newly bought cars remove formaldehyde, different people have different methods:

Ventilation and sun exposure: The advantage of this method is that it does not cost money, and the disadvantage is that the effect is not clear.

Photocatalyst spraying method: The advantages are:

The disadvantage is that after a few days, the formaldehyde or peculiar smell in the car comes up again, you go to complain, and the other party will explain that the formaldehyde in your car is emitted again.

Activated carbon: the advantage is that it is cheap and easy to operate, the disadvantage is: the effect is limited.

If you use a ton, 1000 kilograms, the effect will be some, activated carbon adsorbs formaldehyde, and it is thrown away when it is used, and some can be sucked off with a ton. This may be effective, but it is not realistic. Some people will say that it will be used again after drying it, oh, and it will have to be dried many times, and it may not be possible to do it repeatedly for a year.

Ozone: Low concentration of ozone can not remove any formaldehyde, high concentration, strong oxidizing ozone can not remove any formaldehyde, at most your car's interior black oxidized to yellow, yellow oxidized to white, white oxidized to black.

Negative ions: Negative ions are also theoretically in addition to formaldehyde, but in practice there is no effect. At the same time, it is accompanied by ozone, which is not good for the body.

Ordinary car air purifiers: usually do not have the function of removing formaldehyde. Those with formaldehyde removal function will be marked.

Philips GP9101 car air purifier.

Formaldehyde CADR value 11 cubic meters per hour.

Bosch AM601 car air purifier.

Formaldehyde CADR value.

cubic meters per hour.

Skeethy cup car air purifier.

Formaldehyde CADR value.

cubic meters per hour.

These car air purifiers can remove formaldehyde, but the removal rate of formaldehyde is lower than the release rate of formaldehyde in the new car, that is, it cannot really remove formaldehyde. You are in the car, and the formaldehyde is still exceeded.

Smart car air purifier: A typical representative --- fast air intelligent car air purifier.

Formaldehyde CADR value.

55 cubic meters per hour, the removal of formaldehyde is fast, and the removal of formaldehyde is faster than the release of formaldehyde in the car.

It is also equipped with a high-precision electrochemical formaldehyde sensor to monitor the formaldehyde value in the car in real time, automatically purify, and control the formaldehyde concentration within a safe range.

It is normal for a new car to smell, open four doors for exposure, and then drive with four windows to drive, and at the same time put grapefruit peel in the car, the general effect is good.

The smell in the newly bought car is big! How to remove? Just put one of this, remove odors, fresh and natural.

How do I get rid of odors in my car?

Ventilation is plentiful.

More ventilation, this is the most basic common sense, the first reaction to find a peculiar smell is ventilation, if you find a strong smell in the car, before each drive, open the window.

It can also be solved by the following methods: 1. You can put some Maya blue in the new car, use Maya blue to decompose formaldehyde in the car, or open more windows for ventilation to make harmful substances in the car as much as possible. 2. Or buy some activated carbon bags, the adsorption of activated carbon is relatively strong, and it can continue to absorb harmful substances emitted in the car.

3. You can also buy some air fresheners or car perfumes, but because the air is not circulated, harmful substances may stay in the car, so it does not cure the root cause.

Buying a car has long become a common phenomenon in life, and many car owners may spend more than an hour in the car every day, so the quality of the car environment directly affects the physical and mental health of the car owner. However, many new cars will have more or less excessive formaldehyde when they are just bought back, so the removal of formaldehyde in new cars has become the most necessary thing for many car owners to deal with after purchasing a new car. Here's how to deal with formaldehyde, I hope it will help you.

1. Many parts of the new car are protected by plastic bags, many friends like to try to maintain the feeling of the new car without affecting the use without dismantling, in fact, these plastic packaging must be removed in time, otherwise it is difficult to emit harmful gases inside.

2. If you want to ventilate the window to make harmful gases come out, the most effective way is to ventilate, but this method also takes a long time. Due to the relatively small and closed space in the car, the new car often opens the windows for ventilation, and it is very necessary to open the doors for ventilation when conditions permit.

3. Drive the vehicle to a place that does not affect anyone, where the sun can be directly exposed, open all the car doors, carry out sun exposure removal method, continuous exposure for 2 hours, this method is used 2-3 times, and remove carcinogens polycyclic aromatic hydrocarbons in the car can also remove odors, this method is very useful. But pay attention to the damage of high temperature to the car, pay attention to maintenance.

4. Deodorization activated carbon package is a relatively economical method, because Yeguang mud activated carbon has the effect of adsorption, especially for odor and formaldehyde. Much better than ordinary activated carbon.

5. The main principle of the photocatalyst is that the spray will attach to the surface of the object to form a strong film, on the one hand, it will slow down the release of formaldehyde, on the other hand, it will contact with the film during the release process, and oxidize formaldehyde by using the photocatalytic performance of the photocatalyst. However, in daily life, the film may be oxidized and worn, and the effect will be halved. Photophyll can be used instead.