When is it better to turn on the gas for decoration

Thank you. In my personal experience, it is best to complete all the decoration, and it is best to open the gas after passing the acceptance.

I'm not a professional decorator, so I can't tell why I came, but in my personal understanding, you can't cook and stir-fry with gas first, because the kitchen cabinets are not done, the dining table is not done, where to eat.

In addition: when buying a gas stove, you must see whether the interface matches clearly, and you must not buy the wrong one. In fact, after the gas is installed and the gas is turned on, regular inspections and safety self-inspections should be carried out to ensure that the family can live happily in a relatively safe environment.

It is better to wait until the interior decoration is completed and withdrawn. This reduces safety hazards.

Because there are more flammable products in the house during the renovation, they are not stacked neatly. If someone turns on a gas stove to boil water, etc., there is a chance that something else will be ignited and cause a fire.

All the decoration works were completed; After the new house is cleaned and tidy, it can be connected to electricity, water and gas.

It is better to turn on the gas when the decoration is completed, so as to avoid accidents caused by accidental touch.

The gas is generally opened after the house decoration is completed, the gas stove and the water heater are installed, which is not only convenient to check whether there is a problem with the gas installation, but also to facilitate the later gas transformation.

It is better to have gas after living in, and there is no need to use gas when decorating.

Do the math how much it will cost you to renovate your home

It is understood that most of the newly built communities now have gas pipelines, but many new owners do not know that there is also a time requirement for the opening of gas.

When will the gas be turned on for renovation:

The gas is generally opened after the house decoration is completed, the gas stove and the water heater are installed, which is not only convenient to check whether there is a problem with the gas installation, but also convenient for the gas diversion in the later stage, so that users can use it daily.

How to install natural gas in a new house:

1. When installing gas, you should first understand the natural gas company in the community, then go to the natural gas company to apply for installation, and fill in the relevant information, and then pay the fee and wait for the staff to come to install.

2. After receiving your installation application, the natural gas company will reply within a certain working day, and it is not possible to install it immediately after filling in the **, so be sure to fill in the application form as soon as possible.

3. Before the installation, the staff of the natural gas company will make an appointment with you, and you only need to wait for the personnel to come to the door to install at home, but after the installation, you must clean up the garbage in time.

4. After the natural gas meter is installed, it is necessary to wait for about 2 days before someone will open the natural gas.

5. When opening natural gas, if it is an integrated stove, it is very simple to open, if it is a gas stove, some materials are needed, and the owner may need to pay a certain material fee.

6. After the natural gas is opened, it is necessary to test it to see if it can be ignited, and the installation will be completed if it can be ignited, otherwise it must be reinstalled.

Article summary: Well, the relevant knowledge about when to open the gas for decoration and how to install natural gas in the new house is introduced here, if you need more information, please continue to pay attention to Qeeka Home, and we will have better and more exciting content for you in the future.

Enter the area and get the decoration for free**].

Enter the area and get the decoration for free**].

Do the math how much it will cost you to renovate your home

1. If the corrugated hose of the natural gas water heater needs to pass through the cabinet wall cabinet and needs to be covered by the wall cabinet of the cabinet, then the natural gas water heater should be installed at the same time as the cabinet, so that the cabinet installer can help make a hole in the cabinet, so as to ensure that the natural gas water heater can be successfully installed, so as to avoid delaying the installation and construction in the later stage.

2. If the corrugated hose of the natural gas water heater does not need to pass through the cabinet and hanging cabinet, then as long as the hard decoration construction of the new house decoration is completed, the natural gas water heater can be installed, so that the natural gas water heater is less likely to be bumped or scratched by these construction projects. However, before installation, you must reserve a suitable installation size and installation location in the suitable position of the bathroom ceiling.

3. If the installation of the natural gas water heater will not affect the installation of other cabinets and electrical appliances, you can also choose to leave the natural gas water heater for installation when the decoration construction is about to be completed. However, the installation location, pipeline direction, and installation space of natural gas water heaters must be reserved and arranged in advance.

4. Under normal circumstances, most friends will choose to install the natural gas water heater and the stove at the same time, so that after the installation is completed, you can ventilate and ignite to see if the natural gas water heater can be used normally. This way, once a problem is identified, adjustments can be made in time.

Enter the area and get the decoration for free**].

Enter the area and get the decoration for free**].

Confirm whether the gas pipeline meets the installation requirements. Because the installation location of the gas water heater is generally required to have a certain distance from our gas pipeline. If the installation distance of the gas water heater is not suitable and the pipeline needs to be changed, it is necessary to find the gas company to change the pipeline in advance.

Do not change the gas pipeline without permission, it may lead to the inability to ventilate later. It is recommended that all the hard installations in the home are completed before installing the gas water heater. What is after the end of hard packing?

It means that the latex paint or wallpaper on the wall of our home is all completed, and the tiles on the ground are completed. In addition, for the kitchen, the bathroom ceiling is basically completed, and the corresponding installation position is left, which is better at this time.

The main unit of the water heater can be reinstalled near the end of the renovation. However, the placement of the water heater and the placement of the hot water faucet should be considered in advance before decoration, and the space for installation should be reserved during decoration. The direction of the hot water pipeline must be designed before the decoration and synchronized with the decoration to achieve the most perfect decoration effect.

If it is an electric water heater, because the power consumption is relatively large, so when taking the line of the room, it is necessary to fully consider the capacity of the line.

Use a larger wire size. If it is a gas water heater, it is necessary to consider the gas circuit and power socket supporting the water heater when decorating.

towards, try to do it before pasting the wall tiles.

Generally, it is best to install the gas after the kitchen is decorated and the gas is turned on, because at this time, the natural gas water heater can be installed to try whether the various functions are normal, and it also avoids the scratches of the construction machine in the later stage. It is recommended that when installing, you can buy the installed accessories in advance, and it is cheaper to buy them yourself.

Natural gas pipelines, water pipes, and wires should be embedded in the location where the water heater is installed, such as the bathroom, and the interface should be left. Then according to the normal process of decoration, the bathroom is waterproof, floor tiles and wall tiles are paved to install the water heater, and finally the ceiling and lights.

The head of the household should first choose a qualified and guaranteed natural gas stove, and then the head of the household should carry the purchase contract, the voucher for paying the fee, the name of the head of the household should be the same as the name on the payment document, as well as the natural gas stove certificate, instructions, etc., after the above is ready, bring the certificate to the natural gas service hall to go through the account opening procedures, and it is best to wait for the staff to install.

Residents who have completed the interior decoration and passed the completion acceptance can go to the property service center to go through the procedures for natural gas opening.

1. Select a qualified enterprise to complete the opening

Natural gas pipelines are more dangerous than water supply pipelines, and if they leak, the consequences are unimaginable. The pipes, switch valves, connecting hoses and combustion appliances installed at the user end of natural gas shall be carried out in accordance with the relevant national standards and specifications, and the installation materials and accessories that meet the relevant national quality standards shall be used, and the installation and maintenance shall be carried out by qualified enterprises and qualified engineers.

2. A "Test Report" should be issued before ventilation

After the installation and maintenance of natural gas users are completed, they shall be tested for pressure and leakage testing. If the inspection and testing are qualified, the "Test Report" shall be issued. If it is unqualified, it should be rectified immediately; If it is a quality problem of installation and maintenance, the installation and maintenance enterprise shall reinstall and maintain it free of charge.

The natural gas business enterprise can only be ventilated after receiving the "test report" and confirming that the installation is qualified. If it fails to pass the test, fails to issue the "Test Report", or confirms that the installation is unqualified, it will be refused to be ventilated.

If it is a new house and has been invested, you can take the real estate certificate and ID card to the business office under its jurisdiction to handle it, and it seems that there is no cost.

According to the local market situation, after the house is renovated, it is generally necessary to wait for a period of time before the gas can be turned on. The exact timing depends on the installation schedule of the local gas company and the processing time of the relevant procedures. Generally, it takes about 1 month or so.

If you want to know the specific decoration**, you can use the "decoration artifact" ** device to calculate, just enter the area + city, immediately calculate the local decoration**, list the detailed list of 102 decorations, so that you don't have to worry about overspending on the decoration, click here to start calculating: [3 seconds to get the local decoration**].

As for the cost, there is a certain fee to pay for the gas opening. The first is the installation cost of the gas company, which is determined according to the area of the house and the number of gas appliances, which is generally between 1000-3000 yuan. The second is the purchase cost of the gas meter, which is generally between 200-500 yuan.

In addition, it is also necessary to pay a certain amount of engineering costs, including pipeline laying, interface installation, etc., which are generally between 1000-2000 yuan according to the specific situation.

It should be noted that the above fees are for reference only, and the specific fees need to be determined according to the local market conditions and the requirements of the gas company. Before opening the gas, it is recommended to contact the local gas company to understand the specific fees and procedures, so that you can make relevant preparations.

In short, after the house is renovated, it will take a while to turn on the gas, which depends on the installation progress of the local gas company and the time of the relevant procedures. In terms of costs, you need to pay for the installation cost of the gas company, the purchase cost of the gas meter, and the construction cost. The exact cost depends on the local market conditions and the requirements of the gas company.

It is advisable to contact your local gas company to understand the specific fees and procedures before opening the gas.

Tuba Rabbit is one of the largest decoration platforms in the country, with a total of more than 41 million owners, 110,000 decoration companies, covering more than 300 cities across the country, user reputation is very good, not only to meet your decoration needs, but also to provide professional decoration companies according to your budget, want to find a good company, learn more about decoration knowledge and then on Tuba Rabbit, click here, free 1 to 1 for your home decoration services: [Tuba Rabbit ** official website].

In addition to the basic facilities, there are also water, electricity, gas, etc. are also necessary for life, so when decorating, when to turn on the gas is also a question that makes everyone hesitate, and the following will introduce it to you.

The gas in the community generally has to wait until the renovation of most of the residents is completed and the property company has accepted it, and the gas company has to check whether the gas installation has been changed from house to house, and the gas company will conduct an ignition test after all the state poor acceptance. One thing to note is that canned and piped gas stoves are not the same, can not be universal, when buying a stove must declare that you use it on canned gas, wait until the gas ignition and then take it to modify.

Therefore, it is necessary to wait for the house to be decorated, the gas stove and the hydrothermal water device are installed, and then turn on the gas, so as to measure whether there is a problem with the installation of your master.

<> "Wait almost until the software facilities, gas stoves, and water heaters are installed before turning them on. If the gas is turned on in the community, generally speaking, it is necessary to wait until the decoration of most owners is completed, and after the property is accepted, it is necessary to check whether the device has been modified, and wait until all the acceptance before the ignition test. Note that canning and pipes are different and cannot be used universally, so you must figure it out.

What problems need to be paid attention to in the use of gas.

1. Do not leave the kitchen to cook. If there is something still cooking on this stove, you can't go back to the room to watch TV, play **, etc., and protect the gas stove, so as to prevent accidents such as soup overflow and accidental power failure.

2. Close the door on time, after the gas is used, you need to close the gas valve in time.

3. Do not hang items on the pipe, most people have a habit of hanging crumbs and rags on it when washing vegetables and cooking in the kitchen, which is not a good method, hanging debris is easy to cause pipeline deformation, and in serious cases, it may also cause gas leakage.

4. Be special careful when you find a gas leak, if you smell the smell of gas in your home, don't panic at this time, and don't touch the open flame or replace the power supply, you should open the window, close the power supply, evacuate to the outdoors, and then call the service of the gas company.

5. Do not light the gas stove repeatedly. If you find that the gas stove is not lit for three consecutive times, you should stop it, and then come after the gas dissipates.