How to fix cracked edges of your phone, tips to fix cracks on your phone s screen

1. If the phone is accidentally dropped and cracked, if it can be pressed back, then tap the phone with your finger to press it backIf you can't press back, bring your phone to the mobile phone repair service center for testing.

2. If the back shell of the mobile phone is cracked or damaged, you can replace the back shell of the mobile phone or bring the mobile phone to the nearest after-sales service center for replacement.

3. If the mobile phone battery bulge causes the mobile phone to crack, the battery needs to be replaced, but it is not recommended to disassemble and replace the phone without authorizationPlease bring your mobile phone to the nearest after-sales service center for maintenance.

4. If you can't determine what causes the phone to crack, and the phone is still under warrantyYou can bring your mobile phone and warranty card to the mobile phone repair and after-sales service center to find professionals to test.

What causes the edges of your phone's screen to crack

There are many reasons that can cause the edges of your phone's screen to crack, the most common being "falling", followed by "water ingress" or other reasons. When assembling the mobile phone, although it is also used "shadowless glue.

sealing, but because it is an assembly line seal, the sealing effect will be better, and after the sealing is completed, there will be special equipment to "squeeze" to ensure that the screen and backplane can be completely bonded to the frame.

However, when the phone is injured or flooded, it will cause the edges to degum, and for other reasons, such as the quality of the phone, the volume of internal parts has changed, etc., it may cause the edges of the screen to degum.

It is recommended not to repair it yourself, so as not to cause secondary damage, if you use vivo mobile phone, please bring your mobile phone and purchase voucher to the customer service center for testing and processing, customer service center address: enter the vivo official website vivo**app--my--service outlets after-sales outlets--select provinces and cities to inquire about the address of the customer service center, it is recommended to call the customer service center in advance to confirm the relevant matters and understand the working hours to go, so as not to delay valuable time.

Here's how to fix a crack in your phone's screen:

1. First of all, the easiest way is to click on the screen with your hands, if it can be used normally, then this must be the outer screen is broken, generally we click on the position near the crack, so that we can effectively judge whether it can be used. Under normal circumstances, the inner screen is broken and the mobile phone screen cannot be used normally.

2. If there are color blocks or other water ripples flashing on the display of the screen, then, under normal circumstances, there is a problem with the inner screen, and we need to replace the inner screen when repairing the phone.

3. If you will see some black, yellow, and white spots on the screen, then there is a problem with the counties and cities on the inner screen, and we must pay attention not to let it expand anymore, and we can replace the screen in advance.

4. Since the screen of the current mobile phone is very fragile, we can choose to paste the tempered film on the mobile phone when we buy the mobile phone.

In this way, we can effectively ensure that our mobile phone screen is not so easy to break. Or you can buy a broken screen insurance, and you can replace the screen without spending money after the broken screen.

Cracks in the screen of mobile phones are a very common problem, which not only affects the aesthetics of the phone, but can also affect the touch sensitivity and brightness of the display. Here are some tips to fix a crack in your phone's screen:

Scotch tape can be used to cover the cracks, and for smaller cracks the spread of the cracks can be slowed.

Applying a layer of car wax to the crack and wiping it with a clean cloth can fill the crack and make it look smoother.

Using professional UV glue can quickly repair phone screen cracks. Simply apply the glue to the cracks, then shine a UV light for a few minutes, wait for the glue to dry completely, and then scrape off the excess glue with a spatula.

Applying a layer of screen film to the area of the screen crack can slow down the spread of the crack and protect the screen from further damage.

It should be noted that although the above methods can fix the screen crack, they cannot completely restore the phone to its original state like replacing it with a new screen, and some methods may even cause further damage to the phone. It is recommended to find a professional repair shop or manufacturer for repair as soon as possible. At the same time, when using the mobile phone in daily life, pay attention to protect the mobile phone and avoid falling or collision to reduce the occurrence of screen cracks.

Summary. 1.First of all, put the phone flat on the desktop, it is best to turn off the mobile phone, and then use a tool to clean the mobile phone screen, use a slim tool to detect the cracking range of the mobile phone, and further confirm the size of the repaired area.

2.Seal and wrap the undamaged screen and phone camera with electrical insulating tape, and then stick both sides of the edge of the phone without leaving a gap to prevent the repair glue from penetrating in. 3.

Drop repair glue on the edge of the cracked part of the outer screen of the mobile phone, apply the glue evenly with a tool, and press the mobile phone with your hand or tool until the glue is fixed. After the repair is completed, the electrical insulating tape can be removed, and then the excess repair glue can be cleaned with a tool.

1.First of all, put the mobile phone on the desktop, it is best to turn off the mobile phone, and then use a tool to clean the mobile phone screen, and use a slender gongfan jujube tool to detect the cracking range of the mobile phone, and further confirm the size of the repaired surface. 2.

Seal and wrap the undamaged screen and phone camera with electrical insulating tape, and then stick both sides of the edge of the phone without leaving a gap to prevent the repair glue from penetrating in. 3.Drop repair glue on the edge of the cracked part of the outer screen of the mobile phone, apply the glue evenly with a tool, and press the mobile phone with your hand or tool until the glue is fixed.

After the repair is completed, the electrical insulating tape can be removed, and then the excess repair glue can be cleaned with a tool. Summary.

1.First of all, put the phone flat on the desktop, it is best to turn off the phone and slide it first, and then use a tool to clean the phone screen, and use a slim tool to detect the cracking range of the phone to further confirm the size of the repaired area. 2.

Use electrical insulating tape to seal and wrap the undamaged screen and the mobile phone camera, and then stick both sides of the edge of the mobile phone without leaving a little gap, so as not to penetrate the repair glue. 3.Drip repair glue on the edge of the cracked part of the outer screen of the mobile phone, apply the glue evenly with a tool, and press the mobile phone with your hand or tool until the glue is fixed.

After the repair is completed, the electrical insulating tape can be removed, and then the excess repair glue can be cleaned with a tool.

1.First of all, put the phone flat on the desktop, it is best to turn off the phone and slide it first, and then use a tool to clean the phone screen, and use a slim tool to detect the cracking range of the phone to further confirm the size of the repaired area. 2.

Use electrical insulating tape to seal and wrap the undamaged screen and the mobile phone camera, and then stick both sides of the edge of the mobile phone without leaving a little gap, so as not to penetrate the repair glue. 3.Drip repair glue on the edge of the cracked part of the outer screen of the mobile phone, apply the glue evenly with a tool, and press the mobile phone with your hand or tool until the glue is fixed.

After the repair is completed, the electrical insulating tape can be removed, and then the excess repair glue can be cleaned with a tool.

Summary. What should I do if there are cracks in the mobile phone, method 1: If our mobile phone is only a slight crack, when we go to the repair shop or change the outer screen ourselves, the inner screen is not cleaned or the technician accidentally scratches it, at this time, after adding polarizer or shadowless adhesive to the outer screen, the crack will not be visible.

Method 2: You can try to blow with a hair dryer, take out your mobile phone, and then use the cold air from the hair dryer to blow it. Remember it's a cold wind.

Method 3: You can go to a repair shop to buy a frosted film or diamond film, and let the technician or yourself stick it on your phone, and the cracks on your phone will be less obvious after pasting. Method 4:

Try glass glue with a UV lamp. Method 5: If it is a deep crack, you can go to a repair shop or mobile phone after-sales service to replace the outer screen, this crack will generally not expand, don't worry too much, as long as you don't deliberately squeeze it, use it harder.

Hello, dear This question is up to me, it takes a little time to type, and please be patient.

What should I do if there are cracks in the mobile phone, method 1: If our mobile phone is only a slight crack, when we go to the repair shop or change the outer screen ourselves, the inner screen is not cleaned or the technician accidentally scratches it, at this time, after adding polarizer or shadowless adhesive to the outer screen, the crack will not be visible. Method 2:

You can try to blow with a grip hair dryer, take your phone out, and then use the cold air of the hair dryer to blow it. Remember that the bridge has to be a cold wind. Method 3:

You can go to the repair shop to buy a matte film or diamond film, and let the technician or yourself stick it on the phone, and the cracks on your phone will be less obvious after pasting. Method 4: You can try glass glue with ultraviolet lamp.

Method 5: If it is a deep crack, you can go to a repair shop or mobile phone after-sales service to replace the outer screen, this crack will generally not expand, don't worry too much, as long as you don't deliberately squeeze it, use it harder. It's basically covered.

Summary. 1.Reason:

The cause of a cracked phone can be due to a drop, excessive stretching, or other reasons. 2.Workaround:

The case of the phone is made of plastic or metal, both of which have some strength, but in case of a drop or excessive stretching, their strength is affected, which can cause the phone to crack.

1. If the side of the mobile phone is cracked, you can try to glue the crack together, but be careful not to apply the glue to the circuit board of the mobile phone, so as not to affect the normal use of the mobile phone. 2. If the mouth of the wax cracked limb is too large to be glued together, you can consider sending the mobile phone to a professional repair shop for repair to ensure the normal use of the mobile phone.

Can you elaborate on that a little bit more?

1.Cause: The reason why the phone cracks can be caused by a drop, excessive stretching, or other reasons.

3.Personal tip: When using your phone, you should take care to protect it from falling or stretching it too much to avoid damage.

4.Related knowledge: The shell of the mobile phone is made of plastic or metal, and they all have a certain strength, but in the case of falling or overstretching, their strength will be affected, which will cause the phone to crack.