Can floor tiles be processed and then paved on the wall? The result?

After the size of the earth tiles is processed, it is pasted on the wall, and the effect is very good, the floor tiles, I understand, large area of tiles, are processed and cut according to the appropriate size, and then pasted on the wall, after the size of the earth tiles is cut, there should be better wall tiles, and there are fewer cracks after the traditional paste, and the question is raised: Can the earth tiles be made behind the wall? Does it work well?

Below is a detailed analysis of the readers.

New house decoration, need to paste wall tiles, tiles, decoration house know, especially wall tiles, brick walls are not only small specifications, easy to paste quality problems, many people in the purchase of tiles, plan this aspect, not paste traditional wall tiles, but buy large tiles to stick to the wall, because of the floor tile specifications, the wall, the fashion atmosphere is of high taste, so many people buy floor tiles for cutting processing. The traditional large-area floor tile cutting must be high-grade decoration, ordinary decoration, not the choice of floor tile cutting, because the cost of cutting floor tiles is high, such as large-area floor tiles, and then the processing and cutting process appears, there are some defects to make up for economic losses, so the traditional large-area floor tiles, the process of cutting and processing, the difficulty is quite high, of course, the cutting cost includes insurance.

The size of the traditional wall tiles is smaller, 300*600 is the largest wall tile, the large size of the floor tile cutting, the specifications are much larger than the traditional wall tile specifications, the effect of the wall tile is good, and the indoor space area is better improved, which is also the main reason for a lot of high-end decoration, buying large size floor tile processing and cutting, and then wall sticking. In fact, large area of floor tiles is risky in the cutting process, and wall pasting is also difficult.

The density of the floor tile material, especially after the floor tile cutting and processing, the wall is not easy to paste, because the edge of the tile has a small arc, of course, it is not professional, and it can not be seen with the eyes, after the floor tile is cut and processed, there is no arc, the gap between the two tiles in the middle, it is difficult to be accurate, in the process of pasting the wall, it is also more time-consuming, and the visual effect is really good after cutting the floor tiles on the wall.

It can be pasted on the wall, the effect is OK, there is a different kind of beauty, it is also very good, as long as you think it looks good, after all, after the decoration, this is where you live, so your own feeling is very important.

Yes, the effect is not bad, as long as the paste is firm, it can be on the wall. Sticking such tiles will also look atmospheric.

I think so. The effect is still quite good, because this is the effect of my house now. And it's beautiful to look at.

Yes.

Choose lightweight materials for brick building on the paved floor tiles, the wall should be as thin as possible to reduce the pressure on the ground, and the floor tile surface under the wall should be haired to increase the adhesion with the floor tile surface.

Brick wall is made of bricks and concrete, which has good load-bearing, heat preservation, heat insulation, sound insulation, fire prevention, durability and other properties, and is widely used in low-rise and multi-storey houses.

After the floor tiles have been laid, the transition between the wall and the floor may be uneven, and the wall may also show some imperfections due to the removal of old tiles or the destruction of paint. At this time, the wall needs to be treated to ensure that the wall is beautiful, tidy, and perfectly connected with the ground. Here are a few ways to treat walls:

1.Tiles on the wall: If the tiles are replaced along with the floor, then the new tiles can be directly applied to the wall and the imperfections on the wall can be covered.

2.Paint: If the wall is painted, then it can be smoothed by scraping off the old paint and repainting it with new paint. When choosing a paint, it is recommended to choose a product with good water resistance and mildew resistance, which can not only beautify the wall, but also enhance the durability of the wall.

3.Apply glue: If there are no obvious flaws on the wall, but the transition between the wall and the ground is uneven, Zheng Shi can apply glue at the junction of the wall and the ground, then fill the gaps with silicone, tile glue, etc., and finally smooth it with cardboard to achieve a smooth effect.

4.Install baseboards: If the wall has some uneven bushes at the junction of the ground, consider installing baseboards. Skirting boards can not only add to the aesthetics of the wall, but also cover up some less aesthetically pleasing imperfections.

No matter which method is used to treat the wall, it needs to be maintained and maintained after the treatment, so as to avoid secondary damage to the wall as much as possible.

If you really want to build it, there is nothing you can't do.

But from a professional point of view, this is not advisable, the wall will be very unstable.

Reason: The surface of the floor tile is smooth, and there is no adsorption force (or grip, friction, adhesion) between the wall (cement mortar), so it will not be firm at all, and the load-bearing of the floor tile is also limited, because under the floor tile, there is likely to be a gap, which may cause local collapse in the long run, and cause the wall to tilt.

As long as the floor tiles are not empty, there is no problem with building walls.

It is okay if there are no special requirements, but it is best to brush the surface of the floor tiles below the wall, which can increase the adhesion to the surface of the floor tiles.

In fact, for newly laid floor tiles, it is recommended not to operate in this way. It's better to treat the ground a bit before building the wall.

If it is a newly laid floor tile. It is not advisable to do this. It's better to treat the ground a bit before building the wall.

If there are no requirements, of course, you can, but it is better to brush the surface of the floor tiles below the wall, which can increase the adhesion to the surface of the floor tiles.

No, it does not absorb water, which will cause the wall to be unstable.

As long as the floor tiles are not empty, there is no problem with building walls.

Yes, if you have a light steel keel, you need to make a hole in the ground.

It is not possible to lay tiles directly on top of the wall tiles.

The pasting order of the wall ceramic tile specification is: base cleaning treatment, plastering the bottom ash, selecting bricks, soaking, arranging bricks, elastic lines, pasting standard points, pasting tiles, hooking joints, wiping joints, and cleaning.

The construction must be carried out in strict accordance with the standard procedures in order to ensure the quality.

It is not possible to directly paste tiles on the wall tiles, so that the wall tiles are easy to fall off, it is recommended that you knock down the original bricks and then paste the wall tiles. Pay attention to the following when laying wall tiles:

1 bricks can not have empty bricks with hand knocking is solid, bricks to the four corners of the flat, with the hand to touch the brick splicing corner, very flat means that the brick is very flat, need to cut bricks, the wall paste, must use the original edge of the brick collage, sticking to the floor tiles There is a drainage slope problem, that is, the brick surface has a slight slope conducive to drainage. The wall bricks should be selected before paving, and should be soaked in water for more than 2 hours to dry the surface moisture.

2. Before paving, the pay-off positioning and brick arrangement should be carried out, and the non-whole bricks should be discharged in the secondary part or at the yin corner. Each wall should not have two columns of non-whole bricks, and the width of the non-whole bricks should not be less than 1 3 of the whole bricks.

3. Before paving, the horizontal and vertical signs should be determined, the bottom ruler should be padded, and the line should be hung and paved. The surface of the wall bricks should be flat, the joints should be straight, and the width of the joints should be uniform. The yin corner brick should be pressed to the correct direction, the yang angle line should be made into a 45 ° angle butt, and the whole brick should be cut and matched at the wall protrusion, and the non-whole brick patchwork should not be used to pave it.

4. 1:2 cement mortar should be used for combination mortar, and the thickness of the mortar should be 6 10mm. Cement mortar should be spread all over the back of the wall tiles, and one wall should not be paved to the top at one time to prevent it from collapsing.

Before the wall tiles are paved, the wall needs to be perforated to increase the adhesion of the wall tiles! It is recommended that you find a professional master to construct it, in order to ensure the effect of construction!

It is generally not recommended to do this, the original wall due to the tiles, its surface due to the relatively smooth, direct tiling will lead to insufficient tile adhesion

No, you have to apply cement first, otherwise the tiles will fall off.

Porcelain tiles can, other tiles should be made of tile glue, the water absorption rate is relatively low, otherwise it is easy to fall off the hollow drum, or dry hanging, the specific details are supplemented, I can reply to you in detail.