How to knit the shoulders of a sweater, how to pick and weave the sleeves of a dropped shoulder swea

First of all, we have to start the needle, 96 needles, this 96 needles are calculated like this, 8 needles have four paths, each path has two needles, is eight needles; 30 stitches each for the chest and back, and 14 stitches for the shoulders or sleeves. Propose to knit this sweater for the first time, or if you don't have confidence in your own edge, you can ask someone else to make a good side for you, remember to have a single ribbed edge, the height may be one to two centimeters, children are reluctant to wear clothes with too high collars, the reason is that the collar is too high to wrap around the neck. After weaving, weave a circle of flat needles, and then you have to minute the needle, remember, after dividing the number of needles, you have to add a needle.

The first line, 1, first use a needle of jersey and then add a needle, (it is the oblique diameter of the clothes);

Add one needle after knitting 30 needles, add one needle after knitting two needles, (these 30 needles are the number of needles in the front chest, two needles are the number of needles in the oblique diameter, and the sleeve is after the second needle);

After knitting 14 needles, after adding one needle, knitting two needles, and adding another needle, (these 14 needles are the number of needles in the right sleeve, and the second needle is still the number of oblique diameter needles);

Add one needle after knitting 30 needles, add one needle after knitting two needles, and add another needle, (these 30 needles are the number of needles on the back, two needles are the number of needles for the oblique diameter, and the sleeve after the second needle); In weaving from top to bottom, there is a difference between centralized needles and scattered needles, and there is also a way to add needles with the pattern. I'm going to talk about this example today, which is to concentrate on the four roads from the top down.

Take the example of a good friend who is suitable for five to six years old: (remember a principle: the number of stitches in the entire collar is -8 stitches (four tendons), and the rest is scored in three parts.

How to knit sweater shoulders to look good? Teach you a universal shoulder pattern tutorial.

How to weave the sleeves of a dropped-shoulder sweater:

1. After the piece, use the winding needle method to start 100 needles, first weave 2 rows of hollow needles (under knitting, the upper needle bypasses without weaving), use No. 8 knitting 7cm thread, change No. 7 knitting 38cm and make a mark (the starting point of the sleeve cage).

2, weaving 72 lines began to oblique shoulder back, oblique shoulder back 2 lines, after the collar, oblique shoulder back 8 lines, after the collar 6 lines.

3. The front piece starts with 102 needles by winding needle method, first weaves 2 rows of hollow needles (under knitting, and the upper needle is bypassed without weaving) with 8 knitting 7cm thread, and changes to 7 needles to 112 needles, and makes a mark (the starting point of the sleeve cage) after weaving 38cm.

4. After weaving 46 lines, the front collar began to close, and the weaving 64 lines began to lead back with oblique shoulders, and 8 lines from oblique shoulders.

5. The sleeve is 46 needles with the winding needle method, and 2 rows of hollow needles are knitted first (the lower needle is knitted, and the upper needle is bypassed without weaving).

6. Use No. 8 knitting 6cm thread, change No. 7 needle to 60 needles, and then slowly add needles to 88 needles, weaving a total of 116 rows, and then start to close the sleeve mountain. until the entire sleeve is completed.

How to weave a dropped-shoulder sweater:

1. Knit from top to bottom, that is, from the neckline to the bottom, and add 8 needles for each two rows.

2. It is to add two needles to each needle, a total of 4 needles, and the place to add needles is the raglan shoulder.

3. Weave from bottom to top. Knit to the armpit and start knitting out the body, use the small swallow needle reduction method when reducing the needle, start again after weaving and start knitting the sleeves, and use the small swallow needle reduction method to reduce the needle when knitting to the armpit, and then the sleeves and the body are sewn.

The knitting method and steps of a raglan sweater are as follows:

1. Start 160 needles at the bottom and knit with 10 needles. The body is knitted with No. 8 needles, and no needles are added. Still 160 stitch knitting.

2. Knit to the armpits, and begin to weave the front and back pieces, with 8 stitches on each armpit.

3. Start weaving the back piece, and collect two stitches every four rows. Knit until the end of the back piece, the back collar is still empty 18 stitches.

4. Weave the front piece again, and collect two stitches every four rows on both sides and the back piece. When there are still inches from the back collar, the neckline begins to close, and the neckline is empty for 24 stitches. On both sides of the neckline is a stitch every two rows. The shoulders and neckline are knitted at the same time until there is 1 stitch left on each side.

5. Then prepare to weave the collar. The rear collar is 18 stitches, plus the front collar is empty 24 stitches, and the front piece is left with one stitch on each side, a total of 44 stitches. Six stitches were picked out on each side of the front neckline, and now there are 56 stitches in total.

Then put the back piece and the front piece together, and where the front and back pieces are closed, you need to pick out 10 on each side of the shoulder, and the collar has a total of 76 stitches. It's done.

6. Then start knitting the sleeves. When knitting the collar, start with 10 stitches from the shoulder, and then add one stitch back and forth, for a total of 69 stitches for the entire sleeve.

Then close two stitches in every few rows until the cuff reaches 40 stitches.

There are 3 ways to weave the shoulders of sweaters that I know, and I will introduce the one I am most familiar with here.

1 Calculate the width of your shoulders (the width of your shoulders is the width of one side), count how many stitches there are, divide by 2, and that's the number of stitches you want to take.

2 Generally, it is collected once every other row, and the length of these rows is measured according to the number of times it is collected.

3 The length of the cuff (armpit to shoulder), minus the length to be closed, is where the needle begins.

4 specific needle retraction: the beginning of the side of the three needles, normal weaving, from the 4th to 7th needle 4 stitches and 2 stitches, specifically 6 and 4 together, 5 and 7 and this method of stitching is the same as the raglan sleeve knitted from the bottom to the top of the needle) Finally, the remaining three or four stitches are knitted into one stitch

5 The front piece has the same collar as usual, until it is as long as the highest part of the back piece, and then the front and back pieces are closed

There are three ways to weave the shoulders of a sweater, and here's a look at one of them:

First of all, we have to start the needle, start 96 needles, the 96 needles here are calculated like this, 8 needles have four paths, each path has two needles, that is, eight needles; The shoulder is 14 stitches.

To have a single ribbed edge, the height is about one to two centimeters. After weaving, knit another circle of flat needles, and then start the minute hand, remembering that after dividing the number of stitches, add one stitch.

The first line: 1. Use one needle of jersey first and then add one needle.

2. Add one needle after knitting 30 needles, add one needle after knitting two needles, (here 30 needles are the number of needles in the front chest, two needles are the number of needles with oblique diameter, and the sleeve is after two needles).

3. After that, weave 14 needles, add one needle, weave two needles, and add another needle.

4. Add one needle after weaving 30 needles, and add one needle after knitting two needles.

5. After that, weave 14 needles, add one needle, weave one needle, and all the knitting will be completed in one circle. (Here 14 stitches is the number of stitches in the left sleeve, and the knitting stitch is still the oblique stitch number, because one stitch is knitted first in 1, so only one stitch is knitted here).

Repeat this until you have finished a circle on your shoulders.

Second row: All jersey.

The third line: that is, add one needle in front of the diameter and one needle at the back of the diameter, and add a total of eight needles in one circle.

Fourth row: Knitted flat needles.

At this point, the sweater shoulder is done.

1. First of all, prepare wool or cotton thread, rod needle. Start with 18 stitches to do a raglan sweater knitting demonstration from top to bottom. You can knit a few more rows of needles after picking up the needle, or you can start the minute hand directly after knitting a circle. 6 stitches on the front chest and 3 stitches on both shoulders, and 4 needles are used to knit each.

2. Then make the last needle of each rod needle as the shoulder stem. Add one needle to each shoulder of the potato stem. Then repeat the knitting to shoulder height, and then thread the two sleeves with threads and start knitting the body parts.

3. Next, knit the body part to the required length, and then knit the edge of the garment with a needle. Thread the loop of the sleeve with a rod needle, and then start knitting the sleeve.

4. Finally, after knitting the sleeves, use the same method to weave the other sleeve, so that you can simply skip the shoulder sweater from top to bottom.

Summary: 1. Prepare wool or cotton thread, rod needle. Start with 18 stitches to make a raglan sweater knit from top to bottom.

2. The last needle of each rod needle is used as the shoulder stem. Add one needle to each shoulder stem. Then repeat the weave to shoulder height.

3. Knit the body part to the required length, then knit the edges of the clothes with upper and lower needles, and finally knit the sleeves.

The sweater shoulder oblique shoulder knit is as follows:

1. Prepare the wool and wool needles, take 42 needles for demonstration, and then assign 3 needles to start knitting the collar. Knit a needle on the needle, a needle down, weave the calendar leather to the height required by the collar.

2. Next, start the minute hand, divide the front chest and back into 14 stitches, and each shoulder 7 stitches. In this way, a total of 42 needles are threaded separately with 4 needles, and then the knitting and adding needles begin. Needle method: add one needle after the first needle and before the last needle on each needle, and add 8 needles to knit a circle.

3. Repeat the knitting to the armpits, and then wear the two sleeves with thread, and then knit them later. Connect the front chest and back with 3 needles, weave the needle without adding or subtracting, knit to the required length and then change the knitting needle to the upper needle, and knit the edge of the sweater under the needle until the required length is completed.

4. Finally, start knitting the sleeves, thread the loops of the sleeves on the needle and start knitting the needle, knit it to the armpit, and collect the needle as needed. After the sleeves are knitted, the cuffs are knitted up and down, and the other sleeve is knitted in the same way, so that the sweater is knitted with the slanted shoulders.

The slanted shoulder knitting of the sweater is basically woven from top to bottom, and the oblique shoulder is mainly woven with 4 shoulder stems. This requires us to allocate the number of stitches on the front and back of the chest and back and on both shoulders in advance, so that we can weave beautiful oblique shoulders.