How to choose when buying tiles? Is there a big gap between ordinary tiles and big name tiles?

Updated on home 2024-07-17
14 answers
  1. Anonymous users2024-02-12

    What is the difference between big-name floor tiles and ordinary floor tiles?

    1. In general, the quality of well-known brand floor tiles will be much better, because well-known brand floor tiles have detailed production lines at their production and manufacturing level, the quality is carried out in strict and standardized assembly, and there are also well-known brand floor tiles The post-service management system is also very sound, so the purchase of well-known brand floor tiles is more reassuring; Generally, the price of floor tiles is more cost-effective, and the service project level may not keep up, and there may be kicking the ball in the event of product quality problems.

    2. Well-known brand floor tiles, whether it is a good brand, or a second- or third-line brand goods, its product quality is to achieve the national industry standard, naturally one by one, one by one, the owners of the community can be selected according to the actual level requirements, and can buy low-end goods in well-known brands, so the price is more cost-effective.

    How to buy floor tiles?

    First, look at the appearance. The color of the floor tiles should be uniform, the surface finish and flatness are better, the nearby standards, the pattern design is detailed, and four or five pieces are drawn out of a box to observe whether there are any defects such as color difference, deformation, lack of edges and corners.

    2. Listen to the sound. The crisper the sound when hit with a hard object, the higher the level of porcelain and the better the quality. You can also use the thumb, index finger and middle finger of the left hand to clip the corner of the floor tile, easily hang down, and tap the lower end of the floor tile with the index finger.

    3. Water seepage experiment. You can put water droplets on the back of the tile to see the speed of erosion after the water disperses, generally speaking, the moisture absorption slows down, indicating that the density of the floor tile is greater; On the contrary, the hygroscopic absorption is getting faster and faster, indicating that the relative density is scarce, and its intrinsic quality is superior to the former.

    Fourth, the measurement. The higher the accuracy of the perimeter of the floor tile, the better the actual effect after paving, and buying high-quality floor tiles is not only very easy to build, but also saves time and auxiliary materials. Use a tape measure to measure whether there is a difference in the size of a piece of floor tiles, and the high accuracy is the best product.

    In addition, observing its strength, the floor tiles are excellent in terms of strength, strong ductility and not easy to break. Scratch the corners of the fragments of the wall tiles with each other, and observe whether the fracture of the damaged fragment is delicate or loose, hard, brittle or too soft, whether it is scratched, and it is also scattered powder. Specifications are not standardized is important to distinguish the quality of tiles, with a tape measure or caliper to measure the diagonal and quadrilateral specifications of the tile and the thickness is not symmetrical, good floor tiles, the sound is crisp, indicating that the porcelain is made of high scores.

    If the sound of "clicking" is accompanied by the sound of stubble, it indicates that there are cracks in the bricks.

  2. Anonymous users2024-02-11

    When selling tiles, you should choose according to the overall decoration style and lighting and the size of the house, you can choose polished tiles, glazed tiles, vitrified tiles, etc.; The gap between ordinary tiles and big-name tiles is still very large, and big-name tiles are stronger, more wear-resistant, easier to care for, and more practical.

  3. Anonymous users2024-02-10

    I think the first thing to buy is to buy some good brand tiles, and secondly, according to their own needs, choose the quality of ceramic tiles There are glazed tiles and glass tiles and marble tiles, we have to buy according to our own needs; The gap is relatively large.

  4. Anonymous users2024-02-09

    It should be a ***, cost-effective, color in line with your bedroom, good splicing effect, and after-sales guarantee; The gap is very large, not a grade at all.

  5. Anonymous users2024-02-08

    Buying a house is a major event in life, and many people struggle all their lives to buy a house of their own。When buying a house, I will inquire about many comparisons and want to buy a house with a good environment, a better house type and high cost performance. The house is very happy after the purchase, and the new house will be renovated after the handover.

    Decoration is also a brain-draining job, if it is not designed well during the decoration, it will be very troublesome if you want to rectify it in the later stage. <>

    Congratulations on the time of the renovationRenovation is also very expensive, and no amount of money will be smashed into it. When the owner is in charge of repair, the owner should be rational and have a plan for the decoration funds in advance, otherwise the decoration will be like a bottomless pit. Many owners are very entangled when decorating and don't know whether it is necessary to buy big brand tiles.

    The big brand of ceramic tiles is relatively high, but its quality is very good, and the after-sales service is also very comprehensive. Personally, I think it is necessary to buy big brand tiles, big brand tiles, its service quality and color are very good. <>

    Is it necessary to choose a big brand of tiles? And the tiles of big brands work very well after being decorated, and they look higher-grade. There are a lot of miscellaneous bricks on the market, although it is cheap, but the quality is very different.

    Some miscellaneous bricks look similar to the quality of brand bricks on the surface, but because most of the owners are not professional, he can't see the difference at all. Only after using it will you know that after buying the miscellaneous bricks at home, you will find that there is a fishy smell when mopping the floor. <>

    The merchant will also be responsible for it, and the transparency of the brick is also very bad, and it looks dark. After five or six years of use, there may be quality problems. Brand bricks will not be like this, it will not be used for one or two decades will not have major problems, even if there is a problem, the merchant will be responsible.

    If you want to sublet your house, you can use miscellaneous bricks instead of living by yourself, and the ** of miscellaneous bricks is very cheap. In the ceramic tile industry, there is no good quality, cheap bricks, you get what you pay for.

  6. Anonymous users2024-02-07

    It is necessary, Zichai closed because of the trillions of the brand of cracked tiles, their service is good, and the color will appear more high-grade, the decoration is more beautiful.

  7. Anonymous users2024-02-06

    I personally think it is very necessary, after all, the quality of the ceramic tiles of the Dapin Zhengshan brand will be more guaranteed, and the after-sales service is better.

  8. Anonymous users2024-02-05

    I think it is necessary, the quality of big-name products is also guaranteed, and the after-sales of brand tiles also has a certain integrity guarantee.

  9. Anonymous users2024-02-04

    In the past two years, the development of the industry is too fast, many things are more complicated than imagined, the purchase of ceramic tiles is an obvious example, the selection of ceramic tiles does not seem to be so much trouble, but there are many problems with brand selection alone, some people feel that there is no gap between ordinary tiles and brand tiles, the difference between big-name tiles and ordinary tiles? How to buy tiles? In the past two years, the development of the industry is too fast, many things are more complicated than imagined, the purchase of ceramic tiles is an obvious example, the selection of ceramic tiles does not seem so troublesome, but there are many problems with brand selection alone, some people feel that there is no gap between ordinary tiles and brand tiles, just one more brand protection, in fact, it is not, so the difference between big-name tiles and ordinary tiles?

    How to buy tiles?

    What is the difference between big-name tiles and ordinary tiles?

    1. On the whole, the quality of brand tiles will be much better, because brand tiles have a complete production line in their production, and the quality is also installed with strict standards, and the post-service system of brand tiles is also very perfect, so it is more assured to buy brand tiles; Ordinary tiles are relatively cheap, and the service may not keep up, and there may be quality problems and so on.

    2. Brand ceramic tiles, whether it is a good brand, or a second- or third-line brand product, the quality of its products is up to national standards, of course, a penny price is a penny, the owner can choose according to the specific grade needs, you can buy low-end products in the brand, so that the best will be more affordable.

    How to buy tiles?

    1. The method of purchasing tiles - choose the varieties that do not require high requirements for "spelling the right color" and "spelling the pattern", so that the cut half (or edge strip) can be used in other places.

    2. The method of purchasing tiles - adjust the plane and façade design, and avoid the places where the riser and small corners must be cut and are easy to break and waste tiles.

    3. The method of purchasing ceramic tiles - clever use of waist line, other specifications of brick parquet color, ground circle edge, vertical decorative line, bathroom wall mirror, etc., to enrich the effect while avoiding or reducing brick cutting.

    4. The method of purchasing ceramic tiles - master the principle of "small bricks and bricks" for home decoration. Combined with the design effect, the small size is reasonably selected. In general, in a small bathroom, the wall tiles do not exceed about 300, and in the general living room, the floor tiles do not exceed about 800.

    5. The method of purchasing ceramic tiles - the installation part of the kitchen cabinet can choose a more general grade of ceramic tiles, because this part is not exposed to the outside, and its visual effect and quality have little impact on the overall effect of the kitchen.

    Do you know the difference between big-name tiles and ordinary tiles? How to buy ceramic tiles, the difference between big-name tiles and ordinary tiles does have, because it is a brand production, the quality will definitely be higher, but some tiles without a brand do not mean that it is a bad thing, as long as the process is ***, even if it is an ordinary tile, it will be of high quality to use, so it depends on how you buy ceramic tiles, and the result will be good.

  10. Anonymous users2024-02-03

    When renovating a new home, the most difficult thing to replace tiles on the ground, the quality of the ceramic tiles is also various, but if you can buy it, it takes a lot of money, especially for houses in the north, considering the needs of floor heating and filling, so the demand for floor tiles is greater, so what tiles to buy is an important question.

    When we went to the building materials market to buy tiles, we could see many kinds of tiles. But what we consumers are most concerned about is **. One of a certain tile is hundreds, and the first of a certain tile is dozens, so why is there such a big difference?

    Let's look at the teacher's words and understand. Of course, we all know that there are many factors that affect the best of the best, on the surface, the factor that affects the best is the brand, but behind the representative brand is the quality and after-sales service and some other services, of course, we still choose tiles from the quality point of view today.

    From the perspective of technology, if the tile is rough, the quality of the tile must be more general, and the rougher, the simpler the working process, which can be mass-produced, and the cheaper it is. If the work is more delicate and meticulous, it is not only guaranteed in terms of quality and process, but also in terms of color, especially the smoothness and wear-resistance on the surface, so the output is not much, after all, it is high. The quality determines the quality of the tile, and many other factors affect it, such as the quality of the material, such as the amount and lack of material, as well as the degree of wear resistance, etc., which will affect the quality of the tile.

    The other is the degree of water immersion of ceramic tiles, generally in the process of our decoration, in addition to the joint agent and beauty of filling the gaps in the tiles, in order to prevent water immersion, the surface of the ceramic tile can also be waterproof, such as the higher the density of porcelain diamonds, the greater the water absorption, the surface is also very simple, and the bumper is easy to accumulate things that are not dirty, the density of the tile is very low, the absorption rate is very good, and there are almost water seepage things, but the ink and children draw with a pen, it is really difficult to wash. First of all, it is not the best tile, and not everyone can buy such an expensive tile. We chose a cost-effective porcelain diamond, so it was enough.

  11. Anonymous users2024-02-02

    You should choose some big brands with guaranteed quality as much as possible, and you can also choose by looking at the gloss of the tiles and listening to the sound; The water absorption rate between the tiles is different, for the water absorption rate is generally less than the tile, and more than 10% is generally called the clay brick, and the one between the two belongs to the semi-porcelain.

  12. Anonymous users2024-02-01

    To choose a relatively flat surface, pay attention to the brightness of the glaze, pay attention to the overall color matching, do not choose too dark colors, otherwise it will look dirty. The texture is different, the appearance is different, the production process is different, and the cost is different.

  13. Anonymous users2024-01-31

    Choose a reputable choice, the quality is better, the style is more generous, the color is brighter, and the style is not so complicated; The name is different, the brightness is different, the size is different, the comfort is different, and the foot feel is different.

  14. Anonymous users2024-01-30

    Ceramic tiles are very commonly used decoration building materials, because of their high quality and low price, you can install a high-end sense of home without spending a lot of money, and are deeply loved by the owners. In recent years, there have also been some high-end ** tiles on the market, is it worth the price?

    ** = value + profit + store rent + labor cost + advertising input + operating cost + decoration cost + other expenses.

    From the above cost structure, we can know that the water content of ceramic tiles is relatively large, and the low ceramic tiles are not necessarily of poor quality, but they may just be different in brand grade, and the cost of marketing is relatively low, and there is no advertising at all, but it may be from the same manufacturer as the ceramic tile, and there is no difference in quality. At the earliest, ceramic tiles from the factory to the hands of the owner, generally rose by 2 times. In recent years, with the increase of market competition and marketing costs, the owner has bought almost 3 times the ex-factory price, and some high-end brands can increase the price by more than 5 times.

    Although you can't just rely on the best to judge it, there is a bad difference between the tiles on the market. A good tile will not fade, will not leak embryo, whether visually or tactilely, its texture is better. There are many impurities inside the poor tiles, the water absorption rate is large, and it is not easy to clean after a long time.

    The first thing to look at when buying ceramic tiles is to look at the appearance, the tiles are divided into three kinds: excellent, first-class, qualified, the best quality of the tile, and the gloss is the best. Secondly, look at the flatness, each tile is stacked together, if the edge is not warped, it means that it is flat. Secondly, look at the stain resistance, write on the tile with a marker, and if you can wipe it off with a damp cloth after ten minutes, it means that there is no problem.

    Finally, look at the slip resistance, wipe a little water on the surface of the tile, rub it with your hands, if there is a sense of resistance, it means that there is no problem.

    The living room is made of 800*800 glazed bricks, with a good sense of transparency, and each piece is 20-40 yuan;

    Kitchen and bathroom choose 300 * 300 non-slip floor tiles, waterproof and non-slip, each ** in 5-8 yuan;

    Choose 300 * 600 light-colored bright glazed tiles or porcelain tiles for the kitchen wall, each ** at 5-12 yuan;

    The balcony chooses 300 * 300 warm antique bricks, ** within 12 yuan;

Related questions
9 answers2024-07-17

If you choose anti-slip tiles in the kitchen, you can choose all-body bricks, which have good anti-slip performance, and are made of rock chips under high pressure, the surface will not be glazed, and the color of the front and back is the same; The difference between them is still very big, non-slip tiles can effectively play a non-slip role, while ordinary tiles cannot.

12 answers2024-07-17

The brand of Zhaobang ceramic tile is a large-scale modern ceramic enterprise specializing in the production of microcrystalline stone, luxury full-polished glaze, porcelain polished tiles, and high-quality interior wall tiles. And this brand it has won the "China environmental protection products", "the use of international standard products", "Guangdong Province customer satisfaction products", "the national implementation of customer satisfaction project advanced units" and many other honors in one, is because of these, all in the industry is recognized as one of the trusted brands in the building ceramics industry. And it produces specifications of 240x660mm, 300 600mm to 400 800mm and different specifications of high-grade inkjet interior wall tiles, 600 600mm, 800 800mm and other different specifications of porcelain polished tiles, 800x800mm luxury inkjet full glaze, it belongs to a rich color, fashionable, outstanding quality brand. >>>More

12 answers2024-07-17

Please use tiles for these places.

Wet and polluted places need to be tiled, such as balconies, bathrooms, kitchens and restaurants, even if the wind and rain can maintain the original appearance, soaked in water will not change color and rot, the cleaning process is simple and effortless, will save a lot of maintenance and cleaning costs. >>>More

8 answers2024-07-17

Water absorption is a physical quantity that indicates the degree of water absorption of an object at normal atmospheric pressure, expressed as a percentage. The smaller the water absorption, the tighter and harder the stone, for example, the water absorption rate of hard igneous rocks is often not more than 1%, some dense sedimentary rocks are about 3%, and some loose sedimentary rocks are often 8% or more than 8%, and the water absorption rate refers to the ability of stone to absorb water under standard atmospheric pressure. The water absorption rate of ceramic tiles refers to the degree of water absorption of ceramic tiles. >>>More

4 answers2024-07-17

Precautions when buying tiles:

First of all, when buying ceramic tiles, you should pay attention to what material the tile itself is made of, because the tile itself is made of different materials, and the magnetic rotation of different materials is not the same in the specific use process, therefore, in order to make the ceramic tiles you buy can be more durable, there is a better use effect when buying it is best to choose a tile with a better material. >>>More