-
Good ceramic tiles have a high gloss, are also wear-resistant, very smooth, and the sound is more porcelain when knocked; Good tiles are particularly breathable, and resistant to acid and alkali, earthquake and crack, the bad part is that it is too bulky, and not very natural, there is a certain amount of radiation.
-
You can distinguish the quality of the tile from the sound, hardness, pattern, density and **, the good tile is very hard, not easy to be scratched, and the surface is very smooth, the density is very high, not easy to deform.
-
Pour water over the tiles. Observe the penetration of water, if you buy polished bricks, the water will be sucked in immediately, it is inferior polished tilesPay attention to tile flatness.
Take a few tiles and lay them on the flat ground, observe whether the gaps between the tiles are consistent, and whether the corners of the tiles can be pieced together without much repulsionWriting on the surface of the tile. Wait for the ink to dry for a while to see if it is easy to wash off, and if there is ink left, it is better to choose another one.
-
How to distinguish the good and bad tiles? What are the advantages and disadvantages of good tiles? The color of the body of ceramic tiles is different.
This trick is very simple, basically observe that the reverse color of ceramic tiles is uniform and consistent. The color of the green body is uniform and symmetrical for the better quality ceramic tiles. The degree of delicacy of the cross-sectional texture of ceramic bricks is different.
The section here does not refer to the cutting surface around the ceramic brick, but to the fracture of the ceramic brick fragments. In general, the fracture is thin and hard and brittle, and the color is consistent. Because the ceramic tiles with fine particles have strong waterproof ability; The ceramic bricks with larger particles are easy to be soaked in moisture and affect the quality.
Bobian brick is a kind of polished brick, polished tile is a mirror surface that shows the finish of ceramic tile through mechanical grinding and polishing, and Bobian brick is a weighted polished brick, which is an integral ceramic brick, and its surface is very smooth, unlike ordinary polished bricks that need to be polished. The wear-resistant performance of Bobian bricks is very good, and can be arbitrarily processed, cut, polished and chamfered, etc., but the biggest disadvantage is that any dirty things, some tea or soy sauce are easy to penetrate into it and can not be recovered.
Bobian bricks are similar to polished bricks, but the production requirements are higher, the press should be good, the higher density can be suppressed, and the firing temperature is also higher, which can complete the complete porcelain change. Stick the two porcelain tiles face to face together, the good porcelain tiles will not become warped edges and corners, the warped corners of the porcelain tiles must be together, and the smaller the aperture between the two porcelain tiles, the better. Glazed brick refers to a brick whose surface has been glazed.
The main body is divided into clay and porcelain clay, the back of the clay is red, and the back of the porcelain clay is gray.
The above is a detailed interpretation of the problem, I hope it will help you, if you have any questions, you can leave me a message in the comment area, you can comment with me, if there is something wrong, you can also interact with me more, if you like the author, you can also follow me, your like is the biggest help to me, thank you.
-
In the process of home decoration, ceramic tiles are a very important thing, all rooms in the home, including the living room, should choose tiles, if the quality of the tiles is not good, it may crack in the house with a few jumps. When buying tiles, if you want to distinguish the advantages and disadvantages of ceramic tiles, you need to ** the color and luster of the tiles, and then knock them with your hands, and you can also drop some water on the tiles or take something to scratch them. <>
When you go to buy ceramic tiles, whether you have experience or not, you must observe the color and uniformity of the tiles, and also see whether the back of the tiles is white and pure, and whether there are no impurities. When the first tile, try to choose a place with a better lighting environment, generally good, the tile gives people the feeling that the color is very bright, and the color is very uniform. If there are patterns or patterns on the tile, it is necessary to see whether the patterns are clear, whether there is an obvious lack of color or dislocation, and then see if there are pores on the surface of the tile.
When buying tiles, you can also pick up the tiles, and then gently knock the tiles with your hands, or you can take a hard thing to knock on it to see if the sound of the tiles is pleasant. The clearer the sound of a tile, the higher the density of the tile, the better the quality inside, and the harder the tile. But if the tile sounds very dull and very rough, like the sound of knocking on the board, it means that the density of the tile is not very high, the quality is relatively poor, and it is very easy to break after the tile is pasted.
A good tile is very hard, very tough, and not easy to break. When you go to buy, you can try to discuss with the business, try to find a sharp thing to scratch the tile, if the tile appears loose or left scratches or even fell off the powder, it means that the tile is not wear-resistant at all, and the quality is also very poor.
-
1. Look at the grade logo.
Ceramic tiles are divided into five grades, which is known to many people, from superior products to other products, the difference between each level is larger, if you do not pay attention to the tile and the packaging box on the logo, specifications and color number, it is easy to be fooled to buy the next class floor tiles, especially the product certificate, trademark and quality inspection standards shallow, these should be seen clearly.
2. Specifications and size standards.
A good floor tile has a standardized size, its deviation is very small, and the decorative effect is even more neat.
First, the brick joint is straight, you can carry a measuring tape to buy floor tiles, if the size difference is more than millimeters, the flatness of the surface is greater than millimeters is a bad product, which will increase the difficulty of construction, and its decoration effect is not good.
3. Look at the hardness.
The hardness of a good floor tile is very good, and its toughness is also strong, and it is not easy to crumble.
4. Listen to sounds.
The sound of good floor tile knocking is very crisp, mainly because of its high porcelain content, you can use a hard object to tap when buying, you can also pinch the corner of the living room tile, tap the middle and lower part of the tile with your index finger, the sound is relatively dull, sluggish is not a good floor tile.
5. Look at the pattern.
If the pattern and pattern on the surface of the floor tile are clear, delicate and exquisite, and there is no color leakage, broken line or different shades, it is an excellent product, and the color difference of the tile is directly related to the decoration effect.
6. Drip test.
Water can be dropped on the back of the tile, if the water disperses slowly, the infiltration is slow, indicating that the density of the floor tile is relatively large, but also a good tile, if it is very fast, it represents its density is sparse, not good.
-
The first point is to look at the color of the tile, you can see whether it is good or bad, the second point is to look at the thickness of the entire tile, and you can know if you continue to observe carefully, and the third point is to see the specific material, what material is made to be able to detect.
-
When buying tiles, we must be cautious, do not let the merchant cheat, try to choose a mid-range brick when buying bricks, generally about 50 yuan of bricks are very good, economical and practical.
-
Before decorating your own house, it is important to choose decoration materials, especially in the selection of ceramic tiles, which need to be used in a large area, must pay attention to the quality of ceramic tiles, so how to distinguish the quality of ceramic tiles? It can be distinguished by four methods: looking, listening, dripping, measuring.
First, how to distinguish the look of tiles.
Look is to look at the appearance of the tile, when buying tiles, you should choose the kind of color uniformity, high gloss, the surrounding surface is flat, the shape should be regular, in order to facilitate the decoration of the general purchase will be purchased in the whole box, at this time to be ready to buy in the box randomly selected a few pieces out to see, pay attention to whether there are defects, incomplete, are in line with the standard to buy.
Second, how to distinguish the listening of tiles.
Listening refers to listening to the sound of the tiles by tapping them and judging the quality of the tiles. Generally, the sound of good tiles is crisp when struck, and the more crisp it is, the better the quality of the tile. When knocking, you can use a hard object to gently knock, or you can pick up the tile from a corner, use your hand to strengthen the middle and lower parts, distinguish whether the sound is crisp, and then judge the quality of the tile, remember that the crisper the better.
Third, how to distinguish the dripping of tiles.
The step of dripping is used to test the density of the tile, of course, the higher the density of the tile, the stronger, the better, the test method is to drip water on the back of the tile, to see how fast the tile absorbs, remember that the slower the water absorption, the greater the density of the tile, the better the quality; The faster the water absorption, the more sparse the density of the tiles and the quality is not good. Homeowners must pay attention when buying.
Fourth, how to distinguish the measurement of ceramic tiles.
Tiles also have different side lengths, the owners of their own room to lay the size of the tile also have different requirements, this is also the selection of ceramic tiles on the one hand, the general tile side length closer to the marked length, the better the laying effect of the tile, this is one aspect of the impact on the quality of house decoration, the higher the accuracy of the side length of the tile bought, the more you can avoid various problems encountered in the decoration.
In general, how to distinguish tiles is through the four methods of seeing, listening, dripping and measuring, I hope to give you a little advice for homeowners who are ready to decorate.
You can get it for free
-
Tile. 01 Advantages of glazed tiles: glazed tiles are a kind of ceramic tiles that we are familiar with, the surface of this kind of tile is made by firing glaze, so this kind of tile is very colorful, it looks like ancient porcelain, and it can be processed to get a lot of different patterns, so families often use this kind of tile.
02 Disadvantages of glazed tiles: Although the surface of glazed tiles looks very attractive, there are also many disadvantages, glazed tiles are easier to be contaminated with some dust, and it is also easier to have color differences, which does not look very beautiful. Glazed tiles are not very stain-resistant, so they need to be cleaned frequently, so they are a bit troublesome to use.
03 The advantages of full-body bricks: modern decoration is a more familiar type of tile, this kind of tile has many advantages, especially the anti-slip is very good, the front and back are basically the same. Moreover, the whole body brick is relatively hard, can resist a lot of pressure, and belongs to the more durable tile.
04 Disadvantages of full-body bricks: Because the full-body bricks are mainly made of stone powder, there will be more doping chemicals, especially some fake and shoddy ones, which have more chemical components and are harmful to the human body. In addition, the color of the whole brick is relatively simple, the change is not very large, and the aesthetics are relatively poor.
05 Advantages of porcelain tiles: porcelain tiles are a kind of ceramic tiles made of natural stone, this kind of tiles are forged at high temperatures, so the temperature requirements are not high, it can be said that they can stand the test of time, and have the characteristics of timelessness, so it can be said that this kind of ceramic tile maintenance does not need to worry.
06 Disadvantages of porcelain tiles: The disadvantages of porcelain tiles are also more obvious, because porcelain tiles require a large number of chemical raw materials in the production process, and they are finally successfully made through mutual bonding. If it does not meet the standard during production, then there is a certain harm to the human body, so this is a big drawback!
07 Advantages of parquet tiles: parquet tiles can be said to be very beautiful, the color tends to be perfect, and a kind of ceramic tile appears after low temperature treatment of parquet tiles. These tiles can be cut and then assembled into any pattern you like, making them the best choice for home renovation.
08 Disadvantages of parquet bricks: due to the complexity of the production process, the cost of raw materials and labor costs are relatively high, which makes it more expensive and difficult for ordinary families to bear. In addition, the parquet bricks are brittle and easy to damage, and the color of the parquet bricks has been exposed to the sun for a long time, and the color will gradually change!
When choosing tiles, you must pay attention to household use, so that you can use the material!
-
The worst of ceramic tiles is related to the service life, especially in the bathroom, kitchen and often trampled on the ground, these places should choose trustworthy ceramic tile products, and you also need to pay more attention when buying ceramic tiles. But do you know what a good tile is? Below I will introduce you how to judge the quality of tiles.
The worst of ceramic tiles is related to the service life, especially in the bathroom, kitchen and often trampled on the ground, these places should choose trustworthy ceramic tile products, and you also need to pay more attention when buying ceramic tiles. But do you know what a good tile is? Below I will introduce you how to judge the quality of tiles.
1. Check the water absorption rate
High-quality wall and floor tiles with very low water absorption. When purchasing, if the wall and floor tiles do not indicate the water absorption rate, you can put the reverse side of the tile on the ground, sprinkle some water on the back of the wall and floor tiles, and distinguish the advantages and disadvantages of the tile by observing the diffusion degree of water droplets after a few minutes: if the water droplets spread rapidly, it means that the water absorption and the texture of the tile is poor.
2. Specific weight
Pick up two tiles of different brands, in the case of similar size and thickness, the lighter one is of inferior quality, while the heavier one is a good brick.
3. Look at the hardness.
Ceramic tiles with high hardness are not easy to be damaged and have a long service life. In the process of selecting tiles, knock on the tiles to listen to whether the sound is crisp, the more brittle the sound, the higher the texture density of the tile, the better the hardness.
4. Measure the size
The standard size of a tile is clearly defined, and if the result of our measurement of the brick is different from the value indicated on the product, it means that the product is of inferior quality. The specifications and sizes are inspected one by one, and the size error is greater than millimeters, and the flatness is greater than millimeters, which will not only increase the difficulty of construction, but also greatly reduce the effect after decoration.
5. Measure the glaze
When detecting, scratch the glaze surface of the tile with a sharp object to see if there are scratches, if there is, it means that the glaze of this type of tile is poor, and the glaze on the surface is polished, and the brick surface will not be able to be cleaned. On the contrary, it shows that this kind of glazed brick is glazed well, wear-resistant and practical.
6. Test the slip resistance
The way to do this is to lay a few floor tiles flat on the ground, sprinkle some water on them, and step on them to feel for yourself. If it is really a non-slip product, then there will be an astringent feeling under the feet. And slipping under the foot proves that it is not a true anti-slip product.
Pair color difference - tile color difference refers to the difference in color and pattern of ceramic tile products due to the production process. Due to the large number of wall and floor tiles purchased at one time, if there is an obvious color difference between multiple packages, the decoration effect will be very affected, so it is necessary to sample and compare the packaged products and observe the changes in color difference.
The above is the answer to the question of how to judge the quality of ceramic tiles, I hope it can help you to purchase ceramic tile products. In addition, the current market ceramic tile height difference is large, ranging from tens of yuan per square meter to one or two hundred yuan, we must learn to judge the quality of ceramic tiles according to the best when purchasing.
Look at what price you want, you can use first-line brands, such as Nobel, Champion, Dongpeng, Rome, Mona Lisa, Naco Polo, etc., all are okay
How to distinguish the quality of tiles.
One look, two listens, three drops of water, four feet. >>>More
It is made of water-based emulsion, non-toxic and environmentally friendly, and meets people's requirements for environmental protection. The thickness of the paint film can reach 2-3mm in one construction, and the real stone paint has a slight extension, effectively covering fine cracks, and has many advantages such as crack resistance, sound absorption, good flexibility, and anti-collision.
Porcelain glazed tiles (antique tiles) currently on the market. >>>More
When choosing tiles, you should choose some milder colors.