Which is better, stoneware or ceramic, and which is better, stoneware tile or porcelain tile

Stoneware and ceramics have their own advantages and disadvantages, and the choice depends on the use scenario and needs.

Stoneware is a type of ceramics that are divided into pottery, stoneware, and porcelain according to their water absorption. Generally speaking, the water absorption of stoneware is between, while the water absorption of ceramics is less. Therefore, in terms of solidity and wear resistance, stoneware is better than ceramic.

However, in terms of food contact, due to the higher water absorption rate of stoneware, it may be easier to absorb moisture from food, resulting in changes in the taste of food. In this regard, ceramics may be more suitable as food containers.

In addition, there are differences between stoneware and ceramics in terms of production process and cost. Stoneware is usually produced using the process of pottery or stoneware, and the cost is relatively low. Ceramics, on the other hand, are more complex and costly.

To sum up, the specific choice of stoneware or ceramics needs to be comprehensively considered according to factors such as use scenarios, needs, and budget. In cases where sturdiness and abrasion resistance are required, stoneware can be chosen; In cases where food containers are required, ceramics can be chosen.

Ceramic is good. In fact, stoneware is a ceramic, but it is a kind of ceramic divided by water absorption. Generally speaking, stoneware refers to ceramics with water absorption. Generally speaking, ceramic tableware is fine porcelain, and the water absorption rate is less.

Stoneware and ceramics are both common materials for making pottery, and each of them has different physical and chemical properties and is suitable for different purposes.

Stoneware porcelain is mainly made of raw materials such as kaolin and quartz sand, which has the characteristics of high temperature earthquake resistance, wear resistance, non-toxic, tasteless, and non-sticking. Its surface is smooth and easy to clean, so it is suitable for making a variety of tableware and kitchen items.

Ceramics include heat-resistant ceramics and ordinary ceramics, heat-resistant ceramics are mainly used to make high-temperature kitchenware such as stoves and ovens, and ordinary ceramics are mainly used to make decorations and furnishings. The material of the porcelain is loose and relatively fragile, unlike stoneware, which is not as resistant to high temperatures and cold and heat differences.

Therefore, if it is used for tableware, cooking utensils, etc. in the kitchen, it is recommended to choose stoneware products, and if it is used for low-temperature decorative ornaments, etc., you can consider choosing ceramic products. It is necessary to choose according to the respective needs and specific circumstances.

Stoneware and ceramics are two different materials with their own advantages and disadvantages. Stoneware porcelain is a kind of high-temperature firing spike made of ceramics, which is widely used in tableware, tea sets and other household items because of its hard texture, not easy to seepage, not easy to break, etc. Ceramics is a more commonly used material in home decoration, vases, flower pots and other products.

From a practical point of view, stoneware is more excellent, with the advantages of heat resistance, easy to clean, durable, etc., suitable as high-end tableware, vitamin bottles, cestbon bottles and other household items; The leaky Tan ceramics have a variety of colors, natural textures, filial piety, and changeable shapes, which are suitable for decorations.

Of course, each material itself has different qualities and grades, and the specific choice takes into account the desired use, personal preference, quality and ** factors.

Hello dear! Porcelain tiles are good. 1. The most significant difference between pottery and porcelain is that the water absorption rate of porcelain is less than, while the water absorption rate of pottery is greater than 10%, and the water absorption rate of ceramic bricks is much greater than that of porcelain tiles.

2. The structure is different, and the structure of the blind ceramic brick is rough and porous, and the sound of percussion is low-key and dull; The porcelain tile structure is compact and delicate, the surface is shiny, and there is a certain transparency, and the sound of the percussion hall is crisp and pleasant. 3. Hardness and strength are differentIn terms of hardness and strength, ceramic is not as strong and wear-resistant as porcelain.

Summary. Hello, stoneware tiles and porcelain tiles in porcelain bricks good kiss.

1. The water absorption rate is different.

The most significant difference between pottery and porcelain is that the water absorption rate of porcelain is less than that of pottery, while the water absorption rate of pottery is greater than 10%, and the water absorption rate of ceramic bricks is much greater than that of porcelain tiles.

2. The structure is different.

The terracotta brick structure is rough and porous, and the sound of percussion is low-key and dull; The porcelain tile structure is tight and delicate, the surface is shiny, and there is a certain transparency, and the sound of percussion is crisp and pleasant.

3. The hardness and strength are different.

In terms of hardness and strength, ceramic is not as strong and wear-resistant as porcelain. <>

Which is better, stoneware tile or porcelain tile.

Good evening, I'm a master thief of life, and I'll take your questions next!

Hello, stoneware tiles and porcelain tiles in the porcelain bricks good kiss 1, the water absorption rate is different pottery and porcelain The most significant difference between the seller is reflected in the water absorption rate, the water absorption rate of porcelain is less than, and the water absorption rate of pottery is greater than 10%, and the water absorption rate of ceramic bricks is much greater than that of porcelain bricks. 2. The structure is different, the ceramic brick structure is rough and porous, and the sound of percussion is low-key and dull; The porcelain tile structure is tight and delicate, the surface is shiny, and there is a certain transparency, and the sound of percussion is crisp and pleasant. 3. Hardness and strength are differentIn terms of hardness and strength, ceramic is not as strong as porcelain and wear-resistant.

Porcelain brick porcelain tile has the texture of natural stone, and has the advantages of high gloss, high hardness, high wear resistance, high stain resistance, low water absorption, less color difference, and more specifications and rich colors, and is a commonly used wall and floor material in bathrooms. Introduction: Porcelain bricks are also known as homogeneous bricks, Tongwang grinding bricks, and vitrified bricks.

Not easy, if you are satisfied with my service, I hope to get your praise, I wish you all the best!

The main differences between pottery and porcelain are as follows: different firing temperatures, different raw materials, different hardness, different transparency, and different glazes.

1. The firing temperature is different.

The firing temperature of pottery is generally lower than that of porcelain, and the lowest even reaches below 800 and the highest can reach about 1100. The firing temperature of porcelain is relatively high, most of them are above 1200, and some even reach about 1400.

2. The raw materials used are different.

Pottery can be made of general clay to make billets and fired, while porcelain needs to choose the material of Tezheng Pengding and use kaolin as the blank. The firing temperature is at the temperature stage required for pottery, and it can become pottery, for example, white pottery in ancient times was fired in this way. At the temperature at which the kaolin is fired is made, the body becomes porcelain.

However, when the clay used to make pottery is burned, it cannot become porcelain and will be melted into glass.

3. The degree of hardness is different.

The firing temperature of the pottery is low, the body is not completely sintered, the sound is muffled when striking, the hardness of the carcass is poor, and some can even use steel knives to cut grooves. The firing temperature of porcelain is high, the carcass is basically sintered, the sound is crisp when striking, and it is difficult to draw grooves on the surface of the carcass with ordinary steel knives.

4. The degree of transparency is different.

Even if the body of pottery is relatively thin, it is not translucent. For example, the black pottery of the Longshan culture is as thin as an eggshell, but it is not transparent. The carcass of porcelain, regardless of its thickness or thickness, is translucent.

5. The glaze is different.

There are two types of pottery: unglazed and glazed, and the glaze of the glazed pottery can be melted at a lower firing temperature. There are two kinds of glazes for porcelain pure guessware, which can be fired with the carcass at a high temperature, or can be hung with a low-temperature glaze on the high-temperature plain firing tire, and fired at a low temperature for the second time.

Porcelain ceramics, also known as stone porcelain, are between pottery and porcelain, with high strength, good thermal stability, lead-free, non-toxic, excellent quality and environmental friendliness.

Ceramic tires are made of general clay, while ceramics are made of kaolin. Ceramics are fired at a temperature of about 900 degrees Celsius, while porcelain is fired at a temperature of about 1200 degrees Celsius. Ceramics do not use glazes, nor do they use high-temperature glazes, while porcelain uses glazes.

The tire of pottery is rougher, the cross-section has better water absorption, under high temperature baking, the carcass is hard and dense, the section basically does not absorb water, and there will be a sound of metal impact when striking.

The firing temperature of the stoneware glaze pigment and the firing temperature of the enamel are comparable, which can be carried out at the same time, and the match is very good, and after microwave heating, it will generally not fade and can be used in the microwave oven.

Pottery can be broadly divided into four categories: earthenware, stoneware, pottery, and porcelain.

Earthenware: coarse, porous, impure color, the lowest degree of pottery, water absorption. The tone is thick and heavy, and the tone is short, like a brick bowl;

Pottery: dense texture, high hardness, natural color, pottery temperature of 1140 1280, no water absorption, thick tone, long tone.

Pottery: the blank is also rolled fine, glazed, high degree of pottery, water absorption, coarse sound and short rhyme.

Porcelain: dense and transparent, glazed, the highest degree of pottery, no water absorption, clear sound and long rhyme.

From the point of view of material characteristics, pottery has many pores and better air permeability, which is suitable for brewing old white tea, ripe pu and other teas, which is conducive to brewing mellow taste, in addition, it is also particularly suitable for boiling water and tea; The surface of porcelain is dense, the water absorption rate is low, and the trouble of brewing oolong tea is conducive to stimulating the tea aroma, and does not leave tea stains and tea taste, which is easy to clean.

The above is the main content of stoneware and ceramics, stoneware is also a kind of porcelain, but the firing of stoneware needs to be processed in a kiln with a high temperature of more than 1,000 degrees, so the texture of stoneware is hard, it will be more liquid and durable.