HP 4500 Printer 901 Ink Cartridge How to refill

Hello Go to color to Li*** consultation, there are detailed ink methods and**, you can find color to Li ink on the Internet.

Just buy a syringe and add it yourself.

The operation method of HP cartridge filling is as follows:Device: HP Printer 1108

1. Remove the printer cartridge as shown in the figure below

2. Open the waste toner port, shake the toner cartridge, pour the waste toner clean, and cover the waste toner mouth, as shown in the following figure

3. Open the powder port, as shown in the figure below

4. Put the small funnel that comes with the purchase of toner on the powder filling port, as shown in the figure below

5. Slowly add toner to the small funnel, and add the amount according to the actual situation, as shown in the following figure

6. Cover the powder port, pick up the toner cartridge and shake it vigorously from side to side to make the toner uniform to ensure the printing effect, as shown in the figure below

HP 901 cartridge filling method:

1. Gently remove the label paper on the ink cartridge to reveal the ink injection hole.

2. For the 5 small holes arranged under the label, please add a sponge, and there are ink holes on the sponge.

3. Add about 8-10ml of ink each time to the black cartridge, and about 4-5ml of each color of the color cartridge each time.

Random experience cartridge generally black cartridge only 1 hole, color cartridge only beam bucket has 3 holes, the inking method is the same as the above, but please reduce the amount of ink appropriately, black each time add about 4-6ml, color Sun shed each color add about 3-4ml each time, that is, the slag can be.

1. It is not recommended to add toner by yourself, because inferior toner will affect the quality of the printed product and the life of the printer, and the leakage of toner during the powder filling process will also affect your health.

2. Moreover, the user's self-dismantling will affect the manufacturer's warranty. If you want to change the toner, you can try the toner of the OKI printer, which has been uniquely improved, and the printing effect is far from inferior toner.

3, but it is still recommended to buy the original ** toner cartridge directly, the toner cartridge not only determines the quality of the print, but also determines the amount of money that the user needs to spend in the process of use. In laser printers, more than 70% of the imaging components are concentrated in the toner cartridge, and the quality of the print is actually largely determined by the toner cartridge.

The HP 1005 uses a 2612a toner cartridge.

You can buy domestic toner cartridges that are easy to add powder, and the original powder is troublesome to compare prices!

Here's a tutorial to check it out!

Answer: Hello friends, 1. First power on the HP printer, keep it running, open its lid, click the open button, so that the ink tank moves to the middle of the printer, and press the turn on button to easily remove it.

2. Tear the sticker on the cartridge, generally the injection point is in the upper right corner of the sticker, which is a small round hole. Use a syringe to draw 3 ml of ink from the ink bottle, and do not use too much, otherwise there will be ink leakage.

3. Use a syringe to slowly inject the ink from the injection hole, the process must be slow, and you can stay in the middle for a while to ensure that the sponge in the ink cartridge fully absorbs the ink. After filling, let the cartridge sit for 10 minutes.

4. Press the print head with a white napkin, if a clear ink strip appears, it means that the ink is added successfully. Load the ink cartridge into the printer in the original installation method, start the printing attempt, and check if it works.