Is it easy to apply for a business license for scrap tire refining?

There is an entry threshold for waste tire refining projects. If the conditions are not met, the project cannot be approved, and the business license cannot be obtained, and it is more difficult to obtain a permit and an environmental impact assessment.

Henan Beigong is engaged in oil refining equipment, which can assist in environmental impact assessment.

1. The business license of the waste tire refining company is still relatively easy to handleThe type of company registration is environmental protection technology or renewable resources, and the business scope is waste tires, rubber, processing, sales and deep processing of steel wire and carbon black. However, it should be reminded that after the establishment of the company, it is also necessary to go to the relevant departments for environmental impact assessment and project filing.

2. The process and time for applying for a business license are as follows:

1. Verify the name of the company

Application department: the market supervision bureau (industrial and commercial bureau) of the jurisdiction where the company is located or the electronic business system for the whole process of commercial registration.

2. Apply for a business license

Applying department: Market Supervision Bureau (Industrial and Commercial Bureau) in the jurisdiction where the company is located

Prepared materials: the original ID card of the legal person, supervisor, finance and shareholder, the property right certificate of the business premises of the registered company in Nanning (real estate certificate, purchase contract or lease contract, etc.), the proportion of shares, the ** number and email address of the legal person, supervisor and finance.

3. Engrave the company's seal

Application department: a unit with official seal engraving business qualification.

Preparation materials: ID card of the company's legal representative, original copy of business license, and seal engraving fee.

4. Filing with the tax department

Applying department: the tax bureau of the jurisdiction where the company is located.

Preparation materials: original ID card of legal person and all shareholders, original and copy of business license, articles of association. (The legal person and the person in charge of finance must be present to take fingerprints in person).

Legal Analysis: First of all, the following conditions need to be met:1

Land use needs to be implemented in accordance with national planning and industry division; 2.The annual comprehensive processing capacity of new waste tire refining enterprises shall not be less than 20,000 tons; 3.100% utilization of waste rubber in waste tires; 4.

The process needs to adopt negative pressure pyrolysis technology and be equipped with corresponding equipment; 5.The dust removal and waste gas treatment in the environmental requirements need to meet the "Comprehensive Emission Standards for Air Pollutants", "Odor Pollutants Discharge Standards", and wastewater recycling; 6.Relevant fire protection requirements for factories, warehouses and storage yards; Then follow the process below:

First, go to the local city (county) first. District) industrial and commercial bureau registered company; 2. Take the feasibility report to the local city (county). District) *** for project approval procedures; 3. Go through the EIA procedures.

Legal basis: Article 2 of the "Standard Conditions for the Comprehensive Utilization of Waste Tires Industry" Project site selection and enterprise layout (1) The enterprise shall comply with the requirements of the national industrial policy and the urban and rural construction planning, ecological environmental protection planning and pollution prevention and control, land use overall planning, and main functional area planning where the sun is located, and its construction shall meet the standardized design requirements. (2) In the national laws, regulations, administrative rules and planning determined or approved by the people at or above the county level nature reserves, scenic spots, drinking water source protection areas, permanent basic farmland and other laws and regulations prohibited by construction areas and ecological environmental protection red line areas, as well as residential, medical and health, cultural education, scientific research, administrative offices and other areas as the main functions, shall not be built, renovated or expanded enterprises.

3) The production capacity design of the enterprise should be compatible with the amount of waste tires. (4) The land use procedures of the enterprise factory area are legal (the lease contract should not be less than 15 years), the area of the plant and the production area should match the comprehensive utilization and processing capacity, and the waste tire storage hopper shed storage site should meet the requirements of the first management standard.

Hello! The process of going through the procedures for the waste tire refining project is divided into three steps: 1. Go to the local city (county) first.

District) industrial and commercial bureau registered limb company; 2. Take the feasibility report to the local city (county). District) *** for project approval procedures; 3. Go through the EIA procedures and search the bureau.

Legal Analysis: First of all, the following conditions need to be met:1

Land use needs to be implemented in accordance with national planning and industry division; 2.The annual comprehensive processing capacity of new waste tire refining enterprises shall not be less than 20,000 tons; 3.100% utilization of waste rubber in waste tires; 4.

The process needs to adopt negative pressure pyrolysis technology and be equipped with corresponding equipment; 5.The dust removal and waste gas treatment in the environmental requirements need to meet the "Comprehensive Emission Standards for Air Pollutants", "Odor Pollutants Discharge Standards", and wastewater recycling; 6.Relevant fire protection requirements for factories, warehouses and storage yards; Then follow the process below:

First, go to the local city (county) first. District) industrial and commercial bureau registered company; 2. Take the feasibility report to the local city (county). District) *** for project approval procedures; 3. Go through the EIA procedures.

Legal basis: Article 2 of the "Standard Conditions for the Comprehensive Utilization of Waste Tires" Project Site Selection and Enterprise Layout (1) The enterprise shall comply with the requirements of the national industrial policy and the local urban and rural construction planning, ecological environmental protection planning and pollution prevention and control, land use overall planning, and main functional area planning, and its construction shall meet the requirements of standardized design. (2) In the national laws, regulations, administrative rules and planning determined or approved by the people at or above the county level, nature reserves, scenic spots, drinking water source protection areas, permanent basic farmland and other areas prohibited by laws and regulations and ecological environmental protection red line areas, as well as residential, medical and hyastic health, culture and education, scientific research, administrative offices and other areas as the main functions, shall not be built, renovated or expanded.

3) The capacity design of the enterprise should be compatible with the amount of waste tires that can be recycled. (4) The land use procedures of the enterprise factory area are legal (the lease contract should not be less than 15 years), the area of the factory area and the production area should match the comprehensive utilization and processing capacity, and the waste tire storage site should meet the requirements of the first management standard.

Summary. Hello, most of them are operable.

1.Land use needs to be implemented in accordance with national planning and industry division;

2.The annual comprehensive processing capacity of new waste tire refining enterprises shall not be less than 20,000 tons;

3.100% utilization of waste rubber in waste tires;

4.The process needs to adopt negative pressure pyrolysis technology and be equipped with corresponding equipment;

5.The dust removal and waste gas treatment in the environmental requirements need to meet the "Comprehensive Emission Standards for Air Pollutants", "Odor Pollutants Discharge Standards", and wastewater recycling;

6.Relevant fire protection requirements for factories, warehouses and storage yards;

The business scope of the waste tire refining business license.

Hello, I am inquiring for you here, please wait a while, I will reply to you immediately Hello, most of them can be operated. 1.Land use needs to be implemented in accordance with national planning and industry division; 2.

The annual comprehensive processing capacity of new waste tire refining enterprises shall not be less than 20,000 tons; 3.100% utilization of waste rubber in waste tires; 4.The process needs to adopt negative band inspection pressure pyrolysis technology and support corresponding equipment; 5.

Environmental requirements for dust removal and waste gas treatment in the absence of trembling need to meet the "Comprehensive Emission Standards for Air Pollutants", "Odor Pollutant Emission Standards", waste water recycling, etc.; 6.Relevant fire protection requirements for factories, warehouses and storage yards;

What I'm asking is what to write about the scope of business.

How to write the business scope of the business license: First, confirm the main business direction of the business organization. Then, according to the main business direction, according to the existing business scope classification to confirm the Youqiao core.

According to the relevant laws and regulations of Haodu, the company's business license shall indicate the name, domicile, registered capital, business scope and other matters.

The business scope of the scrap tire refining company.

Retreading of waste tires, heat energy utilization, thermal decomposition, production of reclaimed rubber, production of rubber powder.

The state of environmentally friendly tire refining equipment is to apply for a business license.

1. There are conditions that meet the requirements;

2. There is a contract and articles of association approved by the examination and approval authority;

3. Employees with fixed business premises and necessary facilities;

4. Have a registered capital that meets the requirements of the state;

5. Have a business scope that conforms to national laws, regulations and policies;

6. Have a sound property system, be able to implement independent accounting, be responsible for profits and losses, and independently prepare a balance sheet or balance sheet.

Therefore, the state of environmentally friendly tire refining equipment is to apply for a business license.

Summary. Hello, it is illegal to use the "local method of refining" for waste tire refining, and the environmental protection in the process of refining is not up to standard, and it is also illegal to do oil refining without going through legal procedures, if there are legal procedures and environmental protection standards are not illegal.

Hello, it is illegal to use the "local method of refining" for waste tire refining, and the environmental protection in the process of refining is not up to standard, and it is also illegal to do oil refining without going through legal procedures, if there are legal procedures and environmental protection standards are not illegal.

The Ministry of Industry and Information Technology issued the "Guiding Opinions on the Comprehensive Utilization of Waste Tires", which stipulates that the construction and standardization of the waste tire system. Local competent departments of industry and information technology should coordinate with relevant departments to incorporate the construction of waste tire system into the development plan of the public service industry, encourage tire manufacturers to use the new product sales network to establish waste tire channels, and strengthen the connection with the reuse of waste tires; The Federation of Industry and Commerce has banned the flow of waste tires into "soil oil refining" and "small recycled rubber" production enterprises.

It is strictly forbidden to import waste tires in disguised violation of regulations.