The compass does not have hot air, and the compass does not use air conditioning

Hello! For the warm air of this car, it is first recommended that you start the engine to warm up, if there is still no warm air after preheating, it is recommended that you touch the warm air water pipe is not hot, if the warm air water pipe is not hot, this may be a problem with circulation, if the warm air water pipe is very hot, it is generally the internal cold and warm conversion flap has a problem.

This is what you need to do if the temperature reaches a certain temperature and then turn on the heater. Because the hot air is generated by the temperature of the engine, secondly, check whether you have adjusted to the position of the warm air.

Is it because the water temperature is not rising? If not, the automatic air conditioner may be a problem with the assembly, and the manual air conditioner may be pulling the cord down.

Hello, this generally needs to choose the temperature area in the red area, and then you need to wait for the water temperature to come up before there is hot air.

Hello, the temperature of the vehicle air conditioner is raised, after the water temperature rises, under normal circumstances, there will be hot air, if there is still not, it is caused by the stagnation of the cold and warm air conversion motor or the blockage of the warm air water tank, you need to go to the repair shop to focus on checking these two reasons and repair in time!

Hello, according to your situation, you may be caused by a problem with the warm air tank, it is recommended that you go to the local 4S store to check it.

Summary. Hello, the steps related to turning on the heater of the vehicle are as follows, first, the prerequisite for the heater to turn on is that the water temperature must rise before the heater, because the heater of the vehicle is heated by the temperature of the engine and the coolant.

Second, the water temperature will slowly rise when the vehicle idles in place for about 10 minutes, or after driving for about 10 minutes.

Third, after the water temperature rises, turn on the wind speed directly in the air conditioning panel area, turn the temperature up, and adjust the position of the air outlet to the position of blowing the face or the feet, and the warm air will come out under normal circumstances.

Thirdly, in winter, it is not recommended to turn on the separate button of the front windshield defogging, because after this button is lit, the AC light will also be on, and the vehicle's cold air conditioner will also be activated. In winter, this forced start is no good for the compressor!

How can the guide get hot air out without air conditioning.

Dear, this question is up to me, it takes a little time to type, please be patient, thank you!

Hello, the steps related to turning on the heater of the vehicle are as follows, first, the prerequisite for the heater to turn on is that the water temperature must rise before the heater, because the heater of the vehicle is heated by the temperature of the engine and the coolant. Second, the leakage of the vehicle generally, idling in situ for about ten minutes, or driving for about ten minutes, the water temperature will slowly rise Third, after the water temperature rises, the air conditioner directly opens the wind speed in the collapsed panel area, adjusts the temperature up, adjusts the position of the air outlet to the position of blowing the face or blowing the feet, and under normal circumstances, the warm air will come out Third, in winter, it is not recommended to open the separate button of the front windshield defogging, because after this button is lit, the AC light will also be on, The vehicle's air conditioning will also be activated. In winter, this forced start is no good for the compressor!

The air conditioner hot air can be turned on in the following ways.

1. First of all, click on the bridge and hit the one-button start button under the steering wheel of the guide to start the engine of the vehicle.

2. After the Compass engine starts, click the OFF button on the Compass air conditioning control button to turn on the Compass air conditioning system.

3. Turn on the Compasser's air conditioner and get stuck in the system, click the A C button to turn off the Compasser's compressor.

4. After turning off the compressor of the compasser, the air conditioning system will stop working, click the up button shown in the figure, so that the heat of the engine will be used to produce hot air.

When the vehicle starts, press the air conditioning switch button, then turn off the refrigeration button, and then press the internal circulation to call the air conditioner to use the heating mode, and other functions can also be adjusted. Heating can also be controlled by increasing the temperature of the air conditioner.

The Jeep Compass Air Conditioning Device is referred to as the car air conditioner. It is used to adjust and control the temperature, humidity, air cleanliness and air flow in the car compartment in the best state, provide a comfortable riding environment for the occupants, and reduce the fatigue of the journey; Ventilation devices that create good working conditions for drivers and play an important role in ensuring safe driving. It generally includes refrigeration units, heating units and ventilation units.

This kind of joint device makes full use of the limited space inside the blind car, the structure is simple, easy to operate, and it is an internationally popular modern automobile air conditioning system.

Hello, this can be hot air as long as you turn on the fan for external circulation, and you don't need to turn on the air conditioner of a c.

Hello, normal, the car air outlet suction is through the engine, after starting the car, the heat of the engine will be sucked into the air outlet with the air, so the wind coming out is warm air.