What should I do if there is dirt in the headlights? 200

It can be cleaned by itself.

Remove the two rubber covers, remove the bulbs, and unscrew the two small lampholders.

Keep both bulbs and be careful not to touch the glass and not to break them, especially not to break them.

Please click Enter a description.

Cleaning tools required: 1 small bottle cap of dish soap.

Water, a rag, twenty or thirty grains of rice (not to fill the hunger, pour it into the lamp to increase friction.

Mix well and pour in. Shake vigorously dozens of times to clean thoroughly.

If you shoot from the bottom to the top, if you can see that there is a lot of dirt and dirt hidden in the lamp shell, shake it to a certain extent, it will be about the same.

Pour out the dish soap and rice water, and you can clearly see how much dirt there is. Rinse the inside with plenty of water, wash it five or six times until it is clear, and notice that a row of rice grains under the lamp shell is stuck underneath, but there is a solution.

Wrap some cotton in the wire and stick it out. Be very careful when wiping, the reflective material on the lamp bowl is more fragile than we imagine, and a little force will cause scars.

If there is dirt in the headlights, then it is along the edge of the lights, we have no way, if you dismantle the lights, it is easy to dismantle, and if you can't see clearly, you have to replace the headlights.

If there is dirt inside the car after hitting it, then the headlights should be removed from the car and wiped clean before putting them on, so that the dirt inside the headlights will be removed.

What should I do if there is dirt inside my car headlights? You can repair the car in the morning, thank you, just check it for you.

Wipe it directly with soapy water, it will have a good cleaning effect, but it should be noted that you should never use laundry detergent water, because laundry detergent is corrosive, and soap is alkaline and will not corrode the lampshade. The advantage of this approach is that it is simple and hassle-free. Or use sandpaper dipped in water to gently polish off the aging lampshade layer, then apply a layer of polish, and finally spray a layer of clear oil to protect it.

The effect of this method is obvious, but not every place can be sanded clean, there are certain limitations, and it is not only the aging lampshade layer that is polished off, but also the protective film of the lampshade, which is still somewhat irreparable. Another way is to replace the lampshade directly, and if it is serious, use polishing.

1.Wet the lampshade with a watering can and wipe the dirt off the shade with a cloth.

2.Spray again and squeeze the toothpaste, squeezing a little more.

3.Wipe clean carefully.

4.After drying, waxing and polishing: this is also relatively common, and the average car detailing shop can do it.

The principle is to polish the lights with sandpaper and then polish them with a special wax. This method has obvious results, but it is not thrown everywhere, which is a disadvantage.

Hello, glad to help you. You can choose to wash with dish soap water, or polish if that doesn't work.

Summary. 1.Remove the headlight assembly; 2.Remove the bulb; 3.Use an appropriate amount of weak alkaline washing liquid to drop into the lampshade, use a suitable long strip, tie a towel or soft brush at the front end, and gently scrub;

How to clean the inside of this headlight? How do you clean the inside of a car headlight?

1.Remove the headlight assembly; 2.Remove the bulb; 3.Use an appropriate amount of weak alkaline washing liquid to drop into the lampshade, use a suitable long strip, tie a towel or soft brush at the front end, and gently scrub;

1. To remove the headlights, you need to screw them first and then disconnect the link between the headlights and the body; 2. Separate the lampshade from the headlight; 3. Drip the weakly alkaline water into the inside of the headlamp, and then gently clean the inside of the headlight with a soft brush; 4. After cleaning, wash it again with clean water, and blow it clean with a hair dryer on the inside of the headlamp after cleaning; 5. Install the headlights and lampshades.

The method of cleaning the headlights of the car is as follows: 1. Clean the dust on the surface and wipe the headlight bank with a rag to be as clean as possible. 2. Cover the edge area of the headlights

Use tape to cover the edge area of the headlights, some cars only have some areas of fogging and hazy phenomenon, you can cover the area that does not need to be repaired to avoid unnecessary scratches. 3. Initial grinding: Immerse a piece of No. 1000 sandpaper in cold water for 10 minutes, evenly wipe the headlight shell, and polish back and forth in one direction to keep the surface moist at all times.

Pay attention to the appropriate force and do not damage the paint or decorative strips around the perimeter. 4. Re-polishing: Repeat the above work with No. 1500 sandpaper, but the grinding direction is different (if you polish up and down for the first time, this time it will be left and right), and still keep the sandpaper wet and polish the entire area.

After wiping it clean, repeat it several times with sandpaper No. 2000, No. 2500, and No. 3000. 5. Apply polishing agent: apply polishing agent on the plastic shell, polish in a circular way, repeat for about ten minutes, pay attention to the strength when polishing, prevent rubbing off the car paint, until the mirror surface is restored to the luster.