Do you know what is the easiest way to make a bow after making so many bows?

Tools Raw materials: ribbon cloth, soft ruler, scissors, glue gun, hairpin, trinket cloth pasting method: 1. Use a soft ruler to measure about 16 cm of ribbon cloth, 2. Cut it with scissors.

3. Glue the two ends of the ribbon together with a glue gun. 4. Then stick the adhesive part on the tabletop and flatten the ribbon cloth by hand. Then use scissors to cut a ribbon of about 1 cm, 5, and glue it to the middle part of the ribbon cloth with a glue gun.

The rough bow shape comes out. 6. Stick your favorite trinkets on the top of the bow with a glue gun, which plays a good decorative role and makes the bow less monotonous. 7. Finally, string the small hairpin from the back of the bow and fix it in the middle with a glue gun.

A pretty and cute ribbon is finished.

It is possible to buy materials for production online.

How to fold a handmade bow**.

Materials and tools: a square of about 15cm paper (or according to your actual needs), scissors, glue.

<> note: Steps 9, 13 and 15 need to move the scissors and cut them according to the lines drawn on the picture. In addition, for the last step, it is personally recommended to fix the two tips of the bow tucked into the knot with glue, otherwise it will easily fall out.

The method of making a bow by hand is as simple as follows:

Step 1: We fold the colored paper into a rice crease, and then fold one of the diagonal lines inward into 2 squares.

Then fold the right angle of the closure down to form an isosceles triangle, depending on your personal preference, I recommend a length of about 2cm.

Step 2: The origami we finished in the first step opens.

Step 3: After folding the second step, we fold the four sides of the upper part of the square in half respectively to form the state displayed on the left of the origami in the picture below, and then open all the origami papers.

Step 4: Fold the adjacent edges of the left and right angles in half to the middle line to form a triangle. Then cut the middle line of the pentagon in the figure.

Step 6: Turn the sharp corners on the left and right sides of the upper part outwards and insert them under the middle square.

Seven steps of the first grand cherry blossom: You can trim the lower part of the ribbon to form another bow shape. It can also be left untrimmed, according to personal preference.

Features of the bow:

The bow can also be called the concentric knot, the shape resembles a butterfly, the production material is not the same, the shape and size are different, but the appearance is beautiful and generous, and there are many ways to play, which reflects the ancient cultural beliefs and strong religion of our country.

Bows are a beautiful decoration that can be used on items such as gift wrapping, clothes, shoes, hair accessories, etc., to increase their aesthetics. Here are a few ways to make a bow.

1. Basic bow.

Fold a ribbon of the bow in half, align the ends and tie a knot.

Fold the strip on the left to the right, then press and hold the middle of it with your finger to flip it up.

Fold the right strap to the left, then thread it through the left strap and down from above.

Grasp the middle of the two straps and pull them tight so that the bow becomes a circle.

Tie a knot at the end of the two straps to complete the bow.

Second, double bows.

Start by making a basic bow.

Tie a basic bow on top of the basic bow, which is smaller than the one below.

Tie the ends of two bows in a knot to complete a double bow.

3. Strawberry bow.

Start by making a basic bow.

Separate the two straps of the bow, tie a knot in the middle, tighten the knot and pat it flat.

Tie a knot at the end of both straps to complete the strawberry bow.

Fourth, three-layer bows.

Start by making a basic bow.

Tie a basic bow on top of the basic bow, which is smaller than the one below.

Separate the two straps of the top bow, tie a knot in the middle, tighten the knot and pat it flat.

Then tie a small bow on the top, which is smaller than the bottom one.

Tie a knot at the end of the three bows to complete a three-layer bow.

The above are several common ways to make bows, and you can choose the bow style that suits you according to your needs and preferences. The key to making a bow is to tighten the strap so that the bow looks neat and beautiful.

Tools and materials needed: ribbons, scissors, candles, QQ threads.

The specific steps are as follows:

Start by cutting a rectangular ribbon. As shown in the figure below:

Roast the edges of the left and right sides over the fire, bend one end to the middle part and hold the other end. As shown in the figure below:

Fold the middle part in four and pinch it, and the position of the pinch must be symmetrical. As shown in the figure below:

Then use the bucket to guess the macro QQ line winding, so that it is done.

Uses of ribbon:

Bow ties are widely used in daily practical and decorative fields such as empty book packaging bag wrapping and shoelace binding because of their relatively simple operation, easy knot and easy to untie, relatively good firmness and beautiful appearance. The bow can better fix the relative position of the two ropes so that they do not slide relative to each other.

Here's how to make a bow:

Prepare materials for burial: thick ribbons, thin ribbons, scissors, QQ wires, glue guns with hot melt adhesives, candles or lighters.

1. Start by cutting a rectangular ribbon.

2. Bake the left and right edges over a fire.

3. Bend over and hold down on the middle part.

4. Fold the middle part in four and pinch it.

5. Wrap it with QQ wire.

6. Take out the thin ribbon and wrap it around the middle part.

7. After winding, apply hot melt adhesive and stick the fine ribbon.

8. Cut off the excess part of the thin ribbon, and the bow is ready.

The bow is shaped like a bow knot, the production material is not the same, the shape and size are different, but the appearance is beautiful and generous, there are many ways to play the difference, which embodies the ancient cultural beliefs and strong religious colors of our country, and embodies the desire of people to pursue truth, goodness and beauty.

Historical Origins:

The verses about knots in the Book of Songs are: Kiss the knot and ninety its rituals. This is a description of the scene when the daughter got married, the mother tied the knot with her while telling many etiquette, and this wedding ceremony made "knotting" a synonym for marriage in ancient times.

During the Warring States Period, Qu Yuan wrote in "The Nine Chapters of Chu Ci Lamentation": The heart is knotted but not dissolved, and the thoughts are born but not released.

The author uses the poem "Gui but not understand" to express his worries and concerns about the fate of the motherland. There are also ancient Chinese poems: Sauvignon Blanc, fate is incomprehensible.

In the glue paint, who can part with this. Among them, the combination of "knots and glue paint" to describe the depth of feelings can be described as just right. Liu Ling of the Jin Dynasty wrote in "The Grass by the Qingqing River":

Mengjun knotted the same heart and traveled to the north forest with wings.

The most common ways to tie bows are double bows and single bows.

1. First cross the two ribbons and tie them in a knot, and use your fingers to make a circle with the ribbon on your left hand. 2. Then fold the ribbon of the right hand to the ribbon of the left hand into a circle, and thread the ribbon of the right hand from the bottom of the circle again. 3. Then pull out the ribbon on the left hand, thread the ribbon on the left hand side through the knot, and finally adjust.

Such a double bow tie method is more suitable for a trillion bows inside, such as shirt dresses, dresses and bow tops, etc., wear clothes tied with bows, and easily regain a full girlish heart.

Wearing a bow skirt and stopping by flower shops, cafes, and bookstores, it seems that life has changed beautifully.

Repeat according to the 1+2 steps of the above double bow, then pull out the ribbon on the left hand side and adjust it.

Single bows are often used as accessories on some coats or clothes, which looks casual and atmospheric.

What kind of bow tie do you like every day?

The specific preparation of the bow is as follows:

One. Material preparation: thick ribbon, thin ribbon, scissors, QQ line, glue gun with hot melt glue, candle or lighter.

Two. Steps:1Start by cutting a rectangular ribbon.

2.Roast the left and right edges over a fire;

3.Bend over one end and hold it down against the middle part;

4.The other end is too;

5.Fold the middle part in half and pinch it;

6.Then wrap it with QQ wire;

7.Take out the thin ribbon and wrap it around the middle part;

8.After winding, apply hot melt adhesive and glue fine ribbon;

9.Cut off the excess ribbon and the bow is ready.

Three. Precautions.

Grill the edges with a blue flame.

Four. How to tie the ribbon.

The first way to play.

You need to prepare a ribbon of moderate length, and its material should not be too hard or soft, which is inconvenient for everyone to tie the knot, and it is easy to break, making the bow not shaped.

After preparing the ribbon, use your fingers to pick up the middle of the ribbon, and then use your index finger and thumb to pick up the ribbon in one direction on one side, after picking it up, you need to observe, you will find that there is a hole in the middle of the bow, where we can pass the ribbon through, so, you need to cross the ribbon of both hands next, pay attention to the ribbon can not fall off when crossing, be sure to hold on, after crossing, pass it through the hole in the middle, and then pull the ribbon on both sides with both hands.

In this way, a simple bow is tied, and we can observe its appearance, with two butterfly wings and a slender tail, which is very beautiful. You can also choose your favorite ribbon according to your own needs, and the bow of your favorite color and style is naturally your favorite.

The second way to play.

You need to prepare a ribbon with bright colors, moderate material and suitable length, put it on the table, fold one end of the ribbon in half, fold it in half, and wrap the ribbon below around to it.

Then wrap it around it, you will also find that there is a hole in the middle after observing the shape of the current ribbon, you only need the last step to complete, on the basis of the previous steps, the ribbon will be wound through the middle, so that it passes through the hole, and then pull the two sides tightly with your hands and you are done!