Why can t the printer print halfway through?

The printing machine is normal at the beginning, and it fails to print halfway through printing, so it should be analyzed in several situations.

The first case: it may be that the foreign object is hindering the lateral movement of the print head, which is accompanied by a strong abnormal noise, and the solution only needs to remove the foreign object.

The second situation: the printer driver is abnormal, this situation usually occurs in the previous computer use abnormal shutdown of the system or file loss, the solution requires a certain system knowledge, by removing the current driver, reinstall the machine driver.

The third situation: the printing material is too thick, the printing height of the print head is unreasonable, the ribbon is loose, etc., the solution needs to be patient and careful, because the processing of the ribbon needs to be cautious, if the installation is unreasonable, similar situations will occur again, so it is necessary to straighten out the ribbon after installation. At the same time, the printing material must match, and the height setting of the printing material by the printer must also correspond.

The fourth situation: it is the transmission system of your printer that is abnormal or malfunctioning, such as the belt is too loose, the parts that fix the print head fall off, the transmission wheel is defective, etc., this situation usually needs to be solved by professional maintenance technicians, do not solve it yourself, because the parts of the printer are easy to be missing.

Kelip has a category of printing equipment, there will be some common sense science, you can usually take a look at it, so that you will not panic when there is a problem.

My printer used to have this phenomenon as well, mainly because the printer checked the system error, and when the dot print started to work well, the printhead would clog halfway through. It is recommended to change the nozzle or wash it a few times and it will be fine.

1.Printing half of the paper out of the blank paper? Check the data cable and reinstall all the drivers. 2.Print half of the paper without moving, and check the paper rubbing unit. Word car components are cleaned!

The new machine is generally not a problem with the wheel, so you open the lid, take out the cartridge and put it in again, and then turn it off and start it again.

1. Incomplete printing of the printer caused by software failure is mostly caused by software failure, you can change the printing interface settings in Windows, select "Start Settings Control Panel System Device Management Port Printer Port Driver Change Driver Show All Devices", change "ECP Print Port" to "Printer Port" and confirm. 2. It may be that there is air intake Open the lid of the continuous supply, put the continuous supply slightly higher than the printer, and print one or two more complex colors to empty the air in the tube. After normal, close the lid and do not move the position of the offering, and it will be used like this in the future.

3. The printing mode is not set to the vertical printing of the word document, and the reason why the horizontal printing is incomplete: the default printing mode of the printer is the vertical printing mode, that is, the vertical version, if you want to print the horizontal version of the document, you need to set the paper type in the first item of the printer, select the page setting in the printing settings, and change the vertical to the horizontal. 4. The background pattern is shielded when the web page is printed, and the default settings of "Internet Options" are changed and dethroned when printing in full and as is, and the current premise is to use a high-resolution color printer.

Select the "Tools" and "Internet Options" command of Internet Explorer, select the "Advanced" page in the "Internet Options" window that opens, and then click the "Print Color and Image" option under the "Print" sub-item in the settings window. 5. Toner cartridge problem The printer prints out blank pages. Some or all of the printed pages are partially blank or incomplete.

Step 1: Remove all protective tape from the toner cartridge and shake the toner well. Step 2:

Replace the toner cartridge, if the toner in the cartridge is depleted, the printout page will be blank, try replacing the toner cartridge. 6. Printer Problems Restarting the printer will be disbanded can solve some of the problems and make the printer run normally again. 7. System problems System problems, restart the computer, sometimes restarting the computer can make the problem solved.

Close all open programs. And save all the files. Tap "Start" and then "Shut down".

There will be a counterpoint box open. Select Restart. Most computers will shut down, power off, power on, and then restart.

After a few minutes, your computer will be ready to continue printing. Reopen the file you want to print, and then try printing again. 8. Influence of other external devices Some peripherals (such as scanners, *** equipment or other printers) may cause the communication between the printer and the computer to be interrupted.

Unplug other external devices from your computer. 9. The content of the document exceeds the printing area When the content of the document exceeds the printing area carried by the paper, the printer will also print incomplete. Adjust the document and ** so that the content is within the print area, and select the all-in format.

10. The printer is incompatible with the software When the printer and the software are incompatible, the content will also be incomplete.