The printer still can t be shared, why can t my printer choose to share?

A computer: path C: Windows System32 Spool Printers, empty the contents inside.

My computer right-click-manage-service-print spooler right-click to start.

In the start of running, enter Open Group Policy, open Computer Configuration--WindowsSettings--Security Settings--Local Policy-Security Options, find "Account: Local accounts with blank passwords are only allowed to log in to the console" to disable this, and find "Network Access: Shared and Security Mode for Local Accounts" to --Guest Only-Local Users Authenticate from Guest.

The guest user guest should be enabled. )

Open the computer configuration -- windows settings -- security settings -- local policy -- user rights assignment -- access this computer from the network, and there must be everyone in it and refuse to access this computer from the network to kill the guest

Restart your computer.

Make sure the line is normal, delete the printer, re-install the printer driver on one of the machines, and then share, the second machine check the working group, find one of the machines, find the printer and double-click, you can!

A computer reinstall the network share, share the printer again, and enable the guest state.

It's a complicated question.

It is recommended to set it up from scratch, share it one by one, and then ping the IP address of each computer, as long as it can be passed, this is still solved on the spot, there are too many problems, I don't know where it is, just set the problem.

Because you turned off file and printer sharing, there is no way for your printer to set up sharing.

Here's how to fix it:

1. Click the [Start] icon in the lower left corner of the computer desktop, and then select the [Control Panel] <>

2. After entering the control panel, find [Network & Internet] and click on the small print below [Select HomeGroup & Sharing Options].

3. After entering the sharing options, select [Change Advanced Sharing Settings] <>

4. In the sharing settings window, find [Enable File and Printer Sharing] and click the dot in front, then click [Save Modification] and then set up printer sharing again.

You need to add a new user to the security settings to share the printer, and the specific steps are as follows:

1.Locate User Rights Assignments, and then double-click Access this computer from the network.

2.Add it manually, and then click on the two places.

3.Click "Find Now", double-click the guest account, and click "OK" to join the guest account.

4.Find "Deny access to this computer from the network", double-click to open it, select the guest account, and click "Delete". “

5.If the guest account for this computer is not opened, the account will also be opened. Double-click 2 places, click "Enabled", and "OK".

6.Generally, after these operations, the printer can be shared.

Dear is happy to answer for you, the following is the result of your query: Yes, the printer ruguo is not shared, and it can still be printed by local direct connection. Normally, as long as the correct driver is installed, you can use the method of directly connecting to the printer, so that the user on the computer side of Kitong can directly connect to the local printer through a specific data port, so that you can print directly with the local printer.

In addition, the local printer can be shared by using the network print service, and the local printer can be registered on the network with the name or IP address provided, so that the user can use the network print service to retrieve the print file from a distance and transfer it to the printer for printing without moving the computer.

Here's how to fix it:

1. First of all, you need to know that this situation means that the IP is no longer accessible, you can access it by the computer name, click on the network, and find the computer name of the shared printer.

2. After clicking in, you will see that you can access the shared printer, and there will be no operation that cannot be completed (error 0x00000709) and the printer name error will be checked again.

3. At this time, you can open the operation and enter the "computer name" to enter.

4. If you want to access it with the IP of the hood, you can try to restart the printer service, press the win+r key to open and run, and enter.

5. After entering the service, find the print spooler service, restart the service, you can access it with IP, if you can't access it, check whether the IP has changed.

Reasons why the printer won't print:

1. The printer device is not online.

There is an indicator next to the online button of the printer, the connection is normal, the indicator will be in a solid state, if the indicator is flashing or not on, it means that the printer is not connected normally, you need to check whether the power and switch are turned on.

2. The printer is in a state of pausing printing.

If the printer is in the state of pausing printing and cannot print, you need to cancel the pause printing in the window of the printer. When the available hard disk memory of the computer (usually the C drive) is less than 10MB, the printer will not be able to print, and you need to delete some documents to free up more space to complete the printing.

3. The printer's hardware or pie buggy driver is damaged.

Damage to the printer's hardware or drivers will also cause the printer to fail to print, and the hardware damage will require repair.

1. First of all, you need to know the name of the computer connected to the printer cable, how to view it, right-click the computer desktop [Computer] and select [Properties].

2. Find the [computer name] as [caiwukd] and write it down.

3. Then in the computer, click [Network] and select the section [caiwukd].

4. Then on the printer icon, right-click and click [Lianbei Burning].

5. Here, the pop-up window prompts that it is connecting.

6. The last display of the printer activity window is successful, which is completed, as shown in the figure below.