Why does the printer print half of it doesn t respond?

The printer prints half of it and doesn't respond for the following reasons:

1. The printer paper setting is wrong, check whether the printer's document is set correctly to the paper type.

2. Paper is jammed inside the printer, take out the paper, restart the printer and print.

3. If the quality hardware of the printer itself is damaged, contact the after-sales service for detailed inspection and replacement.

If so, it is recommended that you check if there is a print task on hold, if the printer's pattern says that the number is not 0, it means that the task is on hold.

You need to clear the shelved tasks first.

Give it a try for driver reloading!

1. Check whether the indicator light on the panel of the printing cracker is abnormal.

1. First of all, check whether there is a paper jam in the printer, if there is any jammed paper or paper, please take it out and try again.

2. Then check whether the printer toner cartridge is good, or whether the toner cartridge is good, if there is a condition, you can make a fuss to replace the toner cartridge to try.

2. Check the printer status.

1. First open the "Control Panel".

2. Then find "Hardware & Sound" and click to turn it on.

3. Select "Devices and Printers" in the pop-up interface.

4. Then check the printer status, if the icon is gray, it means that the connection line is not connected; If the status is "Pause", double-click the icon, click on the "Pause Printing" in the "Printer" menu to remove the previous "checkmark", or you can right-click on the icon and select "Resume Printing".

3. Check whether the system printing service has been started.

1. First select "My Computer", then right-click and select "Manage" among the options that appear.

2. Select "Services & Applications" on the computer management interface that appears.

3. Then select "Service" in the pop-up options.

4. Then find the service "print spooler" in it, see if it has been started, if not, click "start" and then select "startup type" as "automatic". If the Print Spooler service fails to start, check whether the Remote Procedure Call (RPC) service is normal, and if not, the system may be faulty.

Solution: The above is the solution to the printer printing half of the type, the same problem occurs, you can solve it according to the above method.

1. It may be that the foreign body hinders the lateral movement of the print head, which is accompanied by a strong abnormal sound, and the solution only needs to remove the foreign body.

2. The printer driver is abnormal, which usually occurs when the computer has been used abnormally to shut down the system or lose files. The solution requires a certain amount of system knowledge, by removing the currently used driver and reinstalling the machine driver.

3. It is caused by the printing material is too thick, the printing height of the print head is unreasonable, and the ribbon is loose. The solution requires patience and care, because the handling of the ribbon needs to be cautious, and if the installation is not reasonable, a similar situation will occur again, so it is necessary to straighten out the ribbon and install it. Print material at the same time—must match, and the printer's height setting for the printed material should also correspond.

4. The transmission system of the printer is abnormal or faulty, such as the belt is too loose, the parts that fix the print head fall off, and the transmission wheel is defective. This situation usually needs to be solved by a professional service technician, and it is important not to solve it yourself, because the parts of the printer are easily missing.

Half of the printer is out of paper, and the operation method to continue printing after adding paper is as follows: 1. Direct printing: After the printer is out of paper, if the machine has not detected and prompted "printer is out of paper", then quickly add paper to the paper feed box, and the printer will automatically continue to print.

2. Press the "OK" button to continue printing: if the machine has detected and prompted "printer is out of paper", it will automatically suspend the printing task, and then wait for the user to add paper, and after the user finishes adding paper, the printer will not automatically start the printing task, so you need to manually start the printing task, generally there is an "OK" or "OK" button on the panel of the printer, press the key, and the printer will continue to print. 3. Continue printing from "Print Job".

If you can't find the button, then there is usually a task record in the computer, and the user can continue to print. At the beginning, open the control panel or the device and printer, then find your printer (there is usually a rental vertical print task icon on the right side of the taskbar), double-click it, you can see the current printing job, right-click, select Continue on it. 4. Reprint:

If the above operation does not work, you can also select "Cancel" printing on the printer or computer, turn off the printer and restart it, and then reselect the unprinted page on the computer to continue printing.

The printer will not print half of the print, and the solution is as follows:

The printer was normal at the beginning, but it failed and stopped printing in the middle of printing, so it should be analyzed in several situations. The first paragraph bucket is a situation: it may be that the foreign body hinders the lateral movement of the print head, this situation is accompanied by a strong abnormal noise, and the solution only needs to remove the foreign body.

The second situation: the printer driver is abnormal, this situation usually occurs in the previous computer use abnormal shutdown of the system or file loss, the solution requires a certain system knowledge, by removing the current driver, reinstall the machine driver. The third case:

It is caused by the printing material is too thick, the printing height of the print head is unreasonable, the ribbon is loose, etc., the solution needs to be patient and careful, because the processing of the ribbon needs to be cautious, and if the installation is unreasonable, a similar situation will occur again, so it is necessary to install the ribbon after the concept bridge. At the same time, the printing material must match, and the height setting of the printing material by the printer must also correspond. Fourth case:

It is the transmission system of your printer that is abnormal or malfunctioning, such as the belt is too loose, the parts that fix the print head fall off, and the transmission wheel is defective, etc., this situation usually needs to be solved by professional maintenance technicians, do not solve it yourself, because the parts of the printer are easy to be missing.

One may be that the obligation hinders the lateral movement of the printhead, which is accompanied by a strong abnormal noise, and the method is only to remove the foreign object.

The second is that the printer driver is abnormal, this situation is usually accompanied by the grip of the bird, and the previous computer has used the abnormal shutdown of the system or the loss of files The solution to the problem requires a certain amount of system knowledge, by uninstalling the current driver, reinstall the original driver.

3. The transmission system of the printer is abnormal or malfunctioning, such as the belt is too loose, the parts that fix the print head fall off, and the conveyor wheel is defective.

It is necessary to check whether there is a paper jam and whether the ink cartridge is out of ink and the paper jam is caused by it.

If the printer suddenly does not print out in the middle of the game, it may be that the machine is malfunctioning, and it is recommended that you check whether it can bring the phenomenon of paper jamming.

Check if there is a paper jam or try updating the driver with Printer Guard.

It is possible that the drive of the printing wool sail slag leather machine is abnormal, and the reason for this situation is the abnormal shutdown of the computer, or it is possible that the hail foreign body in the cavity beam hinders the lateral movement of the print head

It's possible that your cartridge is running out of ink, or that the paper has a kyo.

This is a problem with the printer's toner cartridge.